ABS Transparent Case for Arduino UNO R3 (LEGO Compatible) SKU:FIT0603 INTRODUCTION This is a transparent plastic Arduino case, which is specially designed for Arduino UNO R3. It is made of ABS material, which has good strength and tenacity. We have reserved enough GPIOs slots on the case, makes it convenient to connect sensors and modules on the board. It will prevent dust and droplets-splashing, avoid pin exposure and solder joint short circuit and so on. In addition, the top and bottom of the case are designed as splicing structures that are compatible with LEGO. You can build a lot of creative projects with LEGO parts. Note: This product does not include a Arduino UNO R3. FEATURES Attractive Appearance Easy to mount and dismount LEGO Compatible SPECIFICATION Material: ABS Injection Apply to Arduino/DFRduino UNO R3 microntrollers Dimension: 79x60x22mm/ 3.11x2.36x0.87" SHIPPING LIST ABS Transparent Case for Arduino UNO R3 (Lego Compatible) Screw set x1 x1 https://www.dfrobot.com/product1786.html 91118