PCI DEVICE DRIVER FOR SH3 MPEG CARD MODEL: HMSA-PCI The PCI device driver enables Windows 95 applications to access the SH3 based PCI card, transmit commands to the card and receive status information from the card. A demo application developed can detect the card, configure it and send commands to the PCI card for running a graphics demo. In the graphics demo the SH3 processor rotates bitmaps in the PCI card memory at different angles and writes the data to the VGA memory using DMA. * Key Features * * * Virtual Device driver for SH3 based PCI card. Windows based application that displays rotating bitmaps using the command set available for programming the PCI card. Direct display of video data using Direct Memory Access (DMA). * System Configuration Minimum Requirements * Video Data Windows Application Demo Command & data VGA Card * * IBM compatible PC with i486/Pentium compatible processor and PCI bus Windows 95 Operating System T-870ADS1 - SH3 PCI Demo Board Demo Subsystem consists of * PCI Bus PCI Device Driver * PCI MPEG Add-on Card * Virtual Device Driver for SH3 PCI card Windows 95 based Software for configuring the card and running the graphics demo Install Shield based installation program * Promotion Devices Part No HD6417708 SH3 Max. Clock Rate 60MHz Operating Voltage 3.3 V HM628127HBJP SRAM 5.0 V HM5283206FP10 SDRAM 3.3 V Page 30 Ver 9811