NuDAM Analog Modules 2 ND-6013 ND-6017 3-CH RTD Input Module 8-CH Analog Input Module Analog Input Channels: 3 Input Type: Pt-100, Ni-100, Ni 120 RTD or Ohm RTD Type Temperature Range Pt -100C to +100C = 0.00385 Pt 0C to +100C = 0.00385 Pt 0C to +200C = 0.00385 Pt 0C to +600C = 0.00385 Pt -100C to +100C = 0.003916 Pt 0C to +100C = 0.003916 Pt 0C to +200C = 0.003916 Pt 0C to +600C = 0.003916 Ni -100 0C to +100C Ni -120 0C to +100C 0 to +60 1 Software & Utilities DAQ 3 Analog Input Channels: 6 differential & 2 singled-ended Input Type: mV, V, and mA Input Range: 150 mV, 500 mV, 1 V, 5 V, 10 V Current Range: 0 to 20 mA (with external 125 resistor) Isolated Voltage: 2500 VRMS Sampling Rate: 20 samples/sec Power Requirement: unregulated +10 V to +30 VDC Power Consumption:1.2 W typical Isolation Voltage: 2500 VRMS Sampling Rate: 3 samples/sec Input Wiring: 2, 3, or 4 wires Power Requirement: unregulated +10 V to +30 VDC Power Consumption: 0.696 W typical PXI 4 Modular Instruments 5 GPIB & Bus Expansion 6 ND-6018 ND-6021 8-CH Thermocouple Input Module Analog Output Module Motion Control 7 Single Channel Analog Output Voltage Output: 0 to +10 V Current Output: 0 to +20 mA, +4 to +20 mA Output Isolation: 5000 VRMS Resolution: 12-bit output resolution accuracy Programmable Output Slope: * 0.125 to 128 mA/sec * 0.0625 to 64 V/sec Current Load Resister: 0 to 500 Analog Input Channels: 6 differential & 2 singled-ended Input Type: Thermocouple, mV, V, or mA Thermocouple Type: J, K, T, E, R, S, B, N, C Thermocouple Input Range * J: 0C to 760C * K: 0C to 1,370C * T: -100C to +400C * E: 0C to 1,000C * R: 500C to 1,750C * S: 500C to 1,750C * B: 500C to 1,800C * N: - 270C to 1,300C * C: 0C to 2,320C * Internal CJC can be enable/disable Voltage Range: 15 mV, 50 mV, 100 mV, 500 mV, 1 V, 2.5 V Current Range: 0 to 20 mA (with external 125 resistor) Isolated Voltage: 2500 VRMS Sampling Rate: 10 samples/sec Power Requirement: unregulated +10 V to +30 VDC Power Consumption: 1.32 W typical Real-time Distributed I/O 8 PAC 9 Remote I/O 10 Power Requirement: unregulated +10 V to +30 VDC Power Consumption: 0.96 W typical Communications ND-6024 11 4-CH Analog Output Module Vision Analog Output Channels: 4 Voltage Output -10 V to +10 V Resolution: 12-bit Accuracy: 0.02% of FSR Maximum current output: 10 A Gain Drift: 10 ppm FSR/C Digital Input Channels: 7 Switching Levels: TTL 12 Power Requirement: unregulated +10 V to +30 VDC Power Consumption: 1.848 W typical Fanless Embedded Computers 13 cPCI & Industrial Computers www.adlinktech.com 9-4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ADLINK Technology: ND-6021 ND-6013 ND-6017 ND-6018 ND-6024