DC/DC Converter
TEL 8WI Series, 8 Watt
Ultra compact 8 W converter in DIP-16
metal casing
Operating temperature range
-40°C to +80°C
Ultra wide 4:1 input range
Built-in EN 55022 class A filter
Protection against short circuit
3-year product warranty
IEC 62368-1
UL 62368-1
The TEL 8WI series is a range of isolated 8 Watt converters which come in a
very compact DIP-16 metal package. They offer an ultra wide 4:1 input voltage
range and feature a high efficiency of up to 86% which allows an operation
temperature of up to +70°C at full load and up to 80°C with 50% load. The
converters have an internal input filter to comply with conducted emission
EN55022 class A.
The TEL 8WI Series models are an economical solution for space critical and
cost sensitive applications in instrumentation, IT and industrial electronics.
Models
Order Code
Output 1
Output 2
Efficiency
Vnom
Imax
Vnom
Imax
typ.
TEL 8-2410WI
3.3 VDC
2'000 mA
78 %
TEL 8-2411WI
5 VDC
1'600 mA
82 %
TEL 8-2412WI
12 VDC
665 mA
85 %
TEL 8-2413WI
15 VDC
535 mA
85 %
TEL 8-2415WI
24 VDC
335 mA
86 %
TEL 8-2422WI
+12 VDC
335 mA
–12 VDC
335 mA
85 %
TEL 8-2423WI
+15 VDC
265 mA
–15 VDC
265 mA
86 %
TEL 8-4810WI
3.3 VDC
2'000 mA
78 %
TEL 8-4811WI
5 VDC
1'600 mA
81 %
TEL 8-4812WI
12 VDC
665 mA
85 %
TEL 8-4813WI
15 VDC
535 mA
85 %
TEL 8-4815WI
24 VDC
335 mA
86 %
TEL 8-4822WI
+12 VDC
335 mA
–12 VDC
335 mA
86 %
TEL 8-4823WI
+15 VDC
265 mA
–15 VDC
265 mA
86 %
www.tracopower.com
September 18, 2019
Page 1 / 4
Input Current
- At no load
24 Vin models:
10 mA typ.
48 Vin models:
8 mA typ.
- At full load
24 Vin models:
390 mA typ.
48 Vin models:
195 mA typ.
Surge Voltage
24 Vin models:
50 VDC max. (1 s max.)
48 Vin models:
100 VDC max. (1 s max.)
Under Voltage Lockout
24 Vin models:
8 VDC typ.
48 Vin models:
16 VDC typ.
Input Filter
Internal Pi-Type
Input Specifications
Voltage Set Accuracy
±2% max.
Regulation
- Input Variation (Vmin - Vmax)
single output models:
0.8% max.
dual output models:
0.8% max.
- Load Variation (0 - 100%)
single output models:
1% max.
dual output models:
2% max. (Output 1)
2% max. (Output 2)
Ripple and Noise
- 20 MHz Bandwidth
55 mVp-p max.
Capacitive Load
- single output
3.3 Vout models:
680 µF max.
5 Vout models:
680 µF max.
12 Vout models:
330 µF max.
15 Vout models:
330 µF max.
24 Vout models:
150 µF max.
- dual output
12 / -12 Vout models:
150 / 150 µF max.
15 / -15 Vout models:
150 / 150 µF max.
Minimum Load
Not required
Temperature Coefficient
±0.02 %/K max.
Start-up Time
35 ms typ.
Short Circuit Protection
Continuous, Automatic recovery
Output Current Limitation
150% typ. of Iout max.
Transient Response
- Response Deviation
5 % max. (25% Load Step)
- Response Time
500 µs max. (25% Load Step)
Output Specifications
Safety Standards
- IT / Multimedia Equipment
EN 62368-1
IEC 62368-1
UL 62368-1
- Certification Documents
www.tracopower.com/overview/tel8wi
Pollution Degree
PD 3
Safety Specifications
EMI Emissions
- Conducted Emissions
EN 55032 class A (internal filter)
EN 55032 class B (with external filter)
- Radiated Emissions
EN 55032 class A (with external filter)
EMS Immunity
EN 55024 (IT Equipment)
- Electrostatic Discharge
Air:
EN 61000-4-2, ±8 kV, perf. criteria A
Contact:
EN 61000-4-2, ±6 kV, perf. criteria A
- RF Electromagnetic Field
EN 61000-4-3, 20 V/m, perf. criteria A
- EFT (Burst) / Surge
EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV, perf. criteria A
Ext. input component:
KY 220 µF
- Conducted RF Disturbances
EN 61000-4-6, 10 Vrms, perf. criteria A
- PF Magnetic Field
Continuous:
EN 61000-4-8, 100 A/m, perf. criteria A
1 s:
EN 61000-4-8, 1000 A/m, perf. criteria A
EMC Specifications
TEL 8WI Series, 8 Watt
All specifications valid at nominal voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
September 18, 2019
Page 2 / 4
Relative Humidity
95% max. (non condensing)
Temperature Ranges
- Operating Temperature
–40°C to +80°C
- Case Temperature
+105°C max.
- Storage Temperature
–50°C to +125°C
Power Derating
- High Temperature
5 %/K above 70°C
Cooling System
Natural convection (20 LFM)
Altitude During Operation
5'000 m max.
Switching Frequency
370 kHz typ. (PWM)
Insulation System
Functional Insulation
Isolation Test Voltage
- Input to Output, 60 s
1'060 VAC
- Input to Output, 1 s
1'800 VDC
Isolation Resistance
- Input to Output, 500 VDC
1'000 MOhm min.
Isolation Capacitance
- Input to Output, 100 kHz, 1 V
500 pF typ.
Reliability
- Calculated MTBF
2'360'000 h (MIL-HDBK-217F, ground benign)
Housing Material
Alu alloy, black anodized coating
Pin Material
Tinned Copper
Soldering Profile
Wave Soldering (1.5mm from casing)
260°C / 10 s max.
Connection Type
THD (Through-Hole Device)
Weight
6.1 g
Environmental Compliance
- Reach
www.tracopower.com/info/reach-declaration.pdf
- RoHS
www.tracopower.com/info/rohs-declaration.pdf
General Specifications
Supporting Documents
Overview Link (for additional Documents)
www.tracopower.com/overview/tel8wi
TEL 8WI Series, 8 Watt
All specifications valid at nominal voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
September 18, 2019
Page 3 / 4
Outline Dimensions
TEL 8WI Series, 8 Watt
Dimensions in mm (inch)
Tolerances: x.x
±0.5 (±0.02)
x.xx ±0.25 (±0.01)
Pin diameter 0.5
±0.05 (0.02 ±0.002)
24.1 (0.95)
3.2 15.24 (0.60) 2.54
14.0 (0.55)
10.16 (0.40)
8.5 (0.33)
3.8
1 7 8
16 10 9
(0.10)
(0.13)
(0.15)
Pinout
Pin Single Dual
1Vin (GND) Vin (GND)
7NC NC
8NC Common
9+Vout +Vout
10 Vout Vout
16 +Vin (Vcc) +Vin (Vcc)
NC: Not connected
© Copyright 2019 Traco Electronic AG Specifications can be changed without notice.
www.tracopower.com
Rev. September 18, 2019
Page 4 / 4