SMCJ36CA - ON SEMICONDUCTOR

CREAT BY ART

 Low profile package

 Built-in strain relief

 Glass passivated junction

 Excellent clamping capability

 Typical IR less than 1uA above 10V

GXX = Specific Device Code

G = Green Compound

Y = Year

M = Work Month

Maximum Ratings and Electrical Characteristics

Rating at 25 ℃ ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%

Symbol Unit

PPK Watts

PDWatts

TJ, TSTG ℃

Typical Thermal Resistance RθJC

RθJA

55 ℃/W

 1500 watts peak pulse power capability with a

10/1000 us waveform

Amps

Maximum Instantaneous Forward Voltage at 50 A for

Unidirectional Only (Note 3) VF3.5 / 5.0 Volts

Features

 Polarity: Indicated by cathode band

Mechanical Data

 For surface mounted application

 Terminals: Pure tin plated, lead free

 Case: Molded plastic

 Fast response time: Typically less than 1.0ps from

0 volt to BV min

 High temperature soldering guaranteed:

260℃ / 10 seconds at terminals

 Plastic material used carried Underwriters

Laboratory Flammability Classification 94V-0

 Weight: 0.26 gram

Type Number

Operating and Storage Temperature Range

Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1)

1. For Bidrectional Use C or CA Suffix for Types SMCJ5.0 through Types SMCJ170

2. Electrical Characterstics Apply in Both Directions

Devices for Bipolar Applications

SMCJ SERIES

1500 Watts Suface Mount Transient Voltage Suppressor

Marking Diagram

SMC/DO-214AB

Dimensions in inches and (millimeters)

 Green compound with suffix "G" on packing

code & prefix "G" on datecode

Peak Forward Surge Current, 8.3ms Single Half

Sine-wave Superimposed on Rated Load

(JEDEC method)(Note 2) - Unidirectional Only

IFSM

Version:H11

Note 3: VF=3.5V on SMCJ5.0 thru SMCJ90 Devices and VF=5.0V on SMCJ100 thru SMCJ170 Devices

Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above T

A=25℃ Per Fig. 2

Note 2: Mounted on 16mm x 16mm Copper Pads to Each Terminal

-55 to +150

1500

Value

200

Steady State Power Dissipation

 Standard packaging: 16mm tape per EIA Std RS-481

RoHS

COMPLIANCE

RoHS

COMPLIANCE

Version:H11

RATINGS AND CHARACTERISTIC CURVES (SMCJ SERIES)

FIG.2 PULSE DERATING CURVE

100

125

0 25 50 75 100 125 150 175 200

TA, AMBIENT TEMPERATURE (oC)

PEAK PULSE POWER (PPPM) OR CURRENT(IPP)

DERATING IN PERCENTAGE, %

FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE

CURRENT

100

1000

1 10 100

NUMBER OF CYCLES AT 60 Hz

IFSM, PEAK FORWARD SURGE A

CURRENT (A)

8.3mS Single Half Sine Wave

JEDEC Method

UNIDIRECTIONAL ONLY

FIG. 3 CLAMPING POWER PULSE WAVEFORM

100

120

140

0 0.5 1 1.5 2 2.5 3 3.5 4

t, TIME ms

PEAK PULSE CURRENT (%)

Peak Value

IPPM

tr=10usec

Half Value-IPPM/2

10/1000usec,

WAVEFORM

PULSE WIDTH(td) is DEFINED

as the POINT WHERE the PEAK

CURRENT DECAYS to 50% OF IPPM

FIG. 5 TYPICAL JUNCTION CAPACITANCE

100

1000

10000

100000

1 10 100

V(BR), BREAKDOWN VOLTAGE (V)

CJ, JUNCTION CAPACITANCE (pF) A

TA=25℃

f=1.0MHz

Vsig=50mVp-p

VR=0

VR-RATED

STAND-OFF

VOLTAGE

UNIDIRECTIONAL

BIDIRECTIONA

FIG. 1 PEAK PULSE POWER RATING CURVE

0.1

100

0.1 1 10 100 1000 10000

tp, PULSE WIDTH, (uS)

PPPM, PEAK PULSE POWER, KW

NON-REPETITIVE

PULSE WAVEFORM

SHOWN in FIG.3

TA = 25℃

Test Stand-Off Maximum

Current Voltage Reverse Leakage

IT VWM @ VWM

Min Max (mA) (V) ID (uA)(Note3)

SMCJ5.0 GDD 6.4 7.3 10 5 1000 164 9.6

SMCJ5.0A GDE 6.4 7 10 5 1000 171 9.2

SMCJ6.0 GDF 6.67 8.15 10 6 1000 138 11.4

SMCJ6.0A GDG 6.67 7.37 10 6 1000 152 10.3

SMCJ6.5 GDH 7.22 8.82 10 6.5 500 128 12.3

SMCJ6.5A GDK 7.22 7.98 10 6.5 500 140 11.2

SMCJ7.0 GDL 7.78 9.51 10 7 200 118 13.3

SMCJ7.0A GDM 7.78 8.6 10 7 200 131 12.0

SMCJ7.5 GDN 8.33 10.30 1 7.5 100 110 14.3

SMCJ7.5A GDP 8.33 9.21 1 7.5 100 122 12.9

SMCJ8.0 GDQ 8.89 10.9 1 8 50 105 15.0

SMCJ8.0A GDR 8.89 9.83 1 8 50 115 13.6

SMCJ8.5 GDS 9.44 11.5 1 8.5 20 99 15.9

SMCJ8.5A GDT 9.44 10.4 1 8.5 20 109 14.4

SMCJ9.0 GDU 10 12.2 1 9 10 93 16.9

SMCJ9.0A GDV 10 11.1 1 9 10 102 15.4

SMCJ10 GDW 11.1 13.6 1 10 5 83 18.8

SMCJ10A GDX 11.1 12.3 1 10 5 92 17.0

SMCJ11 GDY 12.2 14.9 1 11 5 78 20.1

SMCJ11A GDZ 12.2 13.5 1 11 5 86 18.2

SMCJ12 GED 13.3 16.3 1 12 5 71 22.0

SMCJ12A GEE 13.3 14.7 1 12 5 79 19.9

SMCJ13 GEF 14.4 17.6 1 13 5 66 23.8

SMCJ13A GEG 14.4 15.9 1 13 5 73 21.5

SMCJ14 GEH 15.6 19.1 1 14 5 61 25.8

SMCJ14A GEK 15.6 17.2 1 14 5 67 23.2

SMCJ15 GEL 16.7 20.4 1 15 5 58 26.9

SMCJ15A GEM 16.7 18.5 1 15 5 64 24.4

SMCJ16 GEN 17.8 21.8 1 16 5 54 28.8

SMCJ16A GEP 17.8 19.7 1 16 5 60 26.0

SMCJ17 GEQ 18.9 23.1 1 17 5 51 30.5

SMCJ17A GER 18.9 20.9 1 17 5 57 27.6

SMCJ18 GES 20 24.4 1 18 5 48 32.2

SMCJ18A GET 20 22.1 1 18 5 53 29.2

SMCJ20 GEU 22.2 27.1 1 20 5 43 35.8

SMCJ20A GEV 22.2 24.5 1 20 5 48 32.4

SMCJ22 GEW 24.4 29.8 1 22 5 39 39.4

SMCJ22A GEX 24.4 26.9 1 22 5 44 35.5

SMCJ24 GEY 26.7 32.6 1 24 5 36 43.0

SMCJ24A GEZ 26.7 29.5 1 24 5 40 38.9

SMCJ26 GFD 28.9 35.3 1 26 5 33 46.6

SMCJ26A GFE 28.9 31.9 1 26 5 37 42.1

SMCJ28 GFF 31.1 38 1 28 5 31 50.0

SMCJ28A GFG 31.1 34.4 1 28 5 34 45.4

SMCJ30 GFH 33.3 40.7 1 30 5 29 53.5

SMCJ30A GFK 33.3 36.8 1 30 5 32 48.4

SMCJ33 GFL 36.7 44.9 1 33 5 26 59.0

SMCJ33A GFM 36.7 40.6 1 33 5 29 53.3

SMCJ36 GFN 40 48.9 1 36 5 24 64.3

SMCJ36A GFP 40 44.2 1 36 5 27 58.1

SMCJ40 GFQ 44.4 54.3 1 40 5 22 71.4

SMCJ40A GFR 44.4 49.1 1 40 5 24 64.5

SMCJ43 GFS 47.8 58.4 1 43 5 20 76.7

SMCJ43A GFT 47.8 52.8 1 43 5 22 69.4

Version:H11

ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted)

Breakdown Voltage

VBR (V)

at IT

Device

Marking

Code

Maximum

Clamping

Voltage at IPPM

Vc(V)

Maximum

Peak Surge

Current

IPPM

(A)(Note2)

Test Stand-Off Maximum

Current Voltage Reverse Leakage

IT VWM @ VWM

Min Max (mA) (V) ID (uA)

SMCJ45 GFU 50 61.1 1 45 5 19 80.3

SMCJ45A GFV 50 55.3 1 45 5 21 72.7

SMCJ48 GFW 53.3 65.1 1 48 5 18 85.5

SMCJ48A GFX 53.3 58.9 1 48 5 20 77.4

SMCJ51 GFY 56.7 69.3 1 51 5 17 91.1

SMCJ51A GFZ 56.7 62.7 1 51 5 19 82.4

SMCJ54 GGD 60 73.3 1 54 5 16 96.3

SMCJ54A GGE 60 66.3 1 54 5 18 87.1

SMCJ58 GGF 64.4 78.7 1 58 5 15 103

SMCJ58A GGG 64.4 71.2 1 58 5 16 93.6

SMCJ60 GGH 66.7 81.5 1 60 5 14 107

SMCJ60A GGK 66.7 73.7 1 60 5 16 96.8

SMCJ64 GGL 71.1 86.9 1 64 5 13.8 114

SMCJ64A GGM 71.1 78.6 1 64 5 15 103

SMCJ70 GGN 77.8 95.1 1 70 5 12.6 125

SMCJ70A GGP 77.8 86 1 70 5 13.9 113

SMCJ75 GGQ 83.3 102 1 75 5 11.7 134

SMCJ75A GGR 83.3 92.1 1 75 5 13 121

SMCJ78 GGS 86.7 106 1 78 5 11.3 139

SMCJ78A GGT 86.7 95.8 1 78 5 12.5 126

SMCJ85 GGU 94.4 115 1 85 5 10.4 151

SMCJ85A GGV 94.4 104 1 85 5 11.5 137

SMCJ90 GGW 100 122 1 90 5 9.8 160

SMCJ90A GGX 100 111 1 90 5 10.7 146

SMCJ100 GGY 111 136 1 100 5 8.8 179

SMCJ100A GGZ 111 123 1 100 5 9.7 162

SMCJ110 GHD 122 149 1 110 5 8 196

SMCJ110A GHE 122 135 1 110 5 8.9 177

SMCJ120 GHF 133 163 1 120 5 7.3 214

SMCJ120A GHG 133 147 1 120 5 8.1 193

SMCJ130 GHH 144 176 1 130 5 6.8 231

SMCJ130A GHK 144 159 1 130 5 7.5 209

SMCJ150 GHL 167 204 1 150 5 5.8 266

SMCJ150A GHM 167 185 1 150 5 6.4 243

SMCJ160 GHN 178 218 1 160 5 5.4 287

SMCJ160A GHP 178 197 1 160 5 6 259

SMCJ170 GHQ 189 231 1 170 5 5.1 304

SMCJ170A GHR 189 209 1 170 5 5.7 275

Notes:

1. VBR measure after IT applied for 300us, IT=square wave pulse or equivalent.

2. Surge current waveform per Figure. 3 and derate per Figure. 2.

3. For bipolar types having VWM of 10 volts and less, the ID limit is doubled.

4. All terms and symbols are consistent with ANSI/IEEE C62.35.

Version:H11

Maximum

Clamping

Voltage at IPPM

Vc(V)

(Note5)

Maximum

Peak Pulse

Surge Current

IPPM

(A)(Note5)

ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted)

Device

Marking

Code

Breakdown Voltage

VBR (V)

at IT

TVS APPLICATION NOTES:

Version : H11

Any combination of this three, or any one of these applivations, will prevent damage to the load. This would

require varying trade-offs in power supply protection versus maintenance(changing the time fuse).

An additional method is to utilize the Trans

RECOMMENDED PAD SIZES

The pad dimensions should be 0.010"(0.25mm) longer than the contact size, in the lead axis.

This allows a solder filler to form, see figure below. Contact factort for soldering methods.

Transient Voltage Suppressors may be used at various points in a circuit to provide various degrees of

protection. The following is a typical linear power supply with transient voltage suppressor units plaved at

different points. All provide protection

Transient Voltage Suppressor 1 provides maximum protection. However, the system will probably require

replacement of the line fuse(F) since it provides a dominant portion of the series impedance when a surge is

encountered.

Hower, we do not recommend to use the TVS diode here, unless we can know the electric circuit

impedance and the magnitude of surge rushed into the circuit. Otherwise the TVS diode is easy to be

destroyed by voltage surge.

Transient Voltage Suppressor 2 provides execllent protection of circuitry excluding the transformer(T).

However, since the transformer is a large part of the series impedance, the chance of the line fuse opening

during the surge condition is reduced.

Transient Voltage Suppressor 3 provides the load with complete protection. It uses a unidirectional

Transient Voltage Suppressor, which is a cost advantage. The series impedance now includes the line fuse,

transformer, and bridge rectifier(B) so failure