Desktop Specification Rev 3 10/29/99 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Specification Nominal Output Voltage Minimum Output Current Maximum Output Current Maximum Peak Current (1) Maximum Output Power Input Voltage Range Efficiency (2) Inrush current - Maximum (3) Adjustment Range Maximum Ripple & Noise (4) Total Regulation Overcurrent Protection (5) Overvoltage Protection (6) Hold up time - 115VAC Leakage Current Operating Temperature Storage Temperature EMI Safety - designed to meet Other Size (L x W x H) Input connector Output cable Output connector Color V A A A W V % A V mV mV ms mA C C mm m - Model DT36PWxxxP Series DT36PW050P DT36PW090P DT36PW120P DT36PW150P DT36PW180P DT36PW240P 5 9 12 15 18 24 0 0 0 0 0 0 4.0 3.0 2.5 2.4 2.0 1.5 20 27 30 36 36 36 90 ~ 264VAC (47 ~ 63Hz) 75% Typically 50 None 50 90 120 150 180 240 +/-250 +/-360 +/-360 +/-450 +/-540 +/-720 Short Circuit, auto restart Approximately 150% 10 N/A 0 ~ 40C -40 ~ 70C FCC Class B, EN55022B UL1950, CSA 22.2 234, EN60950 CE Mark 106 (4.17") x 60 (2.36") x 30 (1.18") Mates with IEC320/C7 (2 wire) 1.0 (minimum) Right angle 2.1mm ID, 5.5mm OD, barrel length 10mm. Center pin is positive Black Notes: 1 Peak current lasting for 2 secs maximum, average power not to exceed rated maximum 2 At 100VAC or 200VAC input and maximum output power 3 4 5 6 At 120VAC input cold start at 25C Measured across 10uF electrolytic in parallel with 0.1uF ceramic at DC Plug Avoid prolonged operation in overload Zener Diode protected