Desktop Specification
Rev 3 10/29/99
Specification DT36PW050P DT36PW090P DT36PW120P DT36PW150P DT36PW180P DT36PW240P
1Nominal Output Voltage V5 9 12 15 18 24
2Minimum Output Current A000000
3Maximum Output Current A4.0 3.0 2.5 2.4 2.0 1.5
4Maximum Peak Current (1) A--- --
5Maximum Output Power W20 27 30 36 36 36
6Input Voltage Range V
7Efficiency (2) %
8Inrush current - Maximum (3) A
9Adjustment Range V
10 Maximum Ripple & Noise (4) mV 50 90 120 150 180 240
11 Total Regulation mV +/-250 +/-360 +/-360 +/-450 +/-540 +/-720
12 Overcurrent Protection (5) -
13 Overvoltage Protection (6) -
14 Hold up time - 115VAC ms
15 Leakage Current mA
16 Operating Temperature C
17 Storage Temperature C
18 EMI -
19 Safety - designed to meet -
20 Other -
21 Size (L x W x H) mm
22 Input connector -
23 Output cable m
24 Output connector -
25 Color -
Notes:
1Peak current lasting for 2 secs maximum, average power not to exceed rated maximum
2At 100VAC or 200VAC input and maximum output power
3At 120VAC input cold start at 25C
4Measured across 10uF electrolytic in parallel with 0.1uF ceramic at DC Plug
5Avoid prolonged operation in overload
6
Zener Diode protected
DT36PWxxxP Series
90 ~ 264VAC (47 ~ 63Hz)
Model
75% Typically
50
None
Short Circuit, auto restart
Approximately 150%
10
UL1950, CSA 22.2 234, EN60950
CE Mark
0 ~ 40C
-40 ~ 70C
FCC Class B, EN55022B
N/A
Black
106 (4.17") x 60 (2.36") x 30 (1.18")
Mates with IEC320/C7 (2 wire)
1.0 (minimum)
Right angle 2.1mm ID, 5.5mm OD, barrel length 10mm. Center pin is positive
