11
PRODUCT FAMILY DATA SHEET
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS150 REV 1B
Cree® XLamp® XHP50.2 LEDs
PRODUCT DESCRIPTION
The XLamp XHP50.2 LED is the next
generation of Extreme High Power LEDs
that delivers the lowest system cost
through the best lumen density, reliability
and color consistency. Built on Cree’s
latest high-power LED technology, the
XHP50.2 LED improves the lumen density,
voltage characteristics, reliability and
optical performance of the XHP50 LED in
the same 5.0mm x 5.0mm footprint. The
new XHP50.2 LED provides an easy drop-in
upgrade to achieve higher system LPW
for lighting manufacturers with existing
XHP50 designs, eliminating redesign costs.
Its unparalleled lumen density and longer
lifetime at higher operating temperatures
also enables new and innovative lighting
designs at lower system costs.
FEATURES
Available in white, congurable to
3V, 6V or 12V by PCB layout
Available in 5-step EasyWhite® bins
at 3000K to 5000K CCT, 3-step
EasyWhite bins at 2700K to 5000K
and 2-step EasyWhite bins at 2700K
to 4000K CCT
Available in ANSI white bins at
3000K to 7000K CCT
Available in standard, 70-, 80-, and
90-minimum CRI options
Binned at 85°C
Maximum drive current: 6000mA
(3V), 3000mA (6V), 1500mA (12V)
Low thermal resistance: 1.2°C/W
Wide viewing angle: 120°
Unlimited oor life at
≤ 30ºC/85% RH
Reow solderable - JEDEC
J-STD-020C
RoHS and REACh compliant
UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ..............................................2
Flux Characteristics, EasyWhite® Order
Codes and Bins .............................................3
Flux Characteristics, ANSI White Order
Codes and Bins .............................................5
Relative Spectral Power Distribution ...........8
Relative Flux vs. Junction Temperature .......8
Electrical Characteristics ..............................9
Relative Flux vs. Current ............................ 10
Relative Chromaticity vs Current ............... 12
Relative Chromaticity vs Temperature ...... 13
Typical Spatial Distribution ........................ 14
Thermal Design .......................................... 14
Performance Groups – Luminous Flux..... 16
Performance Groups – Chromaticity ........ 16
Crees EasyWhite® Chromaticity Regions
Plotted on the 1931 CIE Curve .................. 19
Crees ANSI Cool White Kits Plotted on
ANSI Standard Chromaticity Regions ....... 20
Crees ANSI Warm and Neutral White Kits
Plotted on ANSI Standard Chromaticity
Regions ....................................................... 21
Bin and Order Code Formats ..................... 22
Reow Soldering Characteristics .............. 23
Notes .......................................................... 24
Mechanical Dimensions ............................ 26
Electrical Conguration ............................. 27
Tape and Reel ............................................. 28
Packaging ................................................... 29
22
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLAMP® XHP50.2 LED
CHARACTERISTICS
XHP50.2 LEDs are tested and binned in production in the 12-V conguration. See the Mechanical Dimensions section on page 26 for
pad layout options.
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 1.2
Viewing angle (FWHM) degrees 120
Temperature coefcient of voltage (3V)* mV/°C -1.5
Temperature coefcient of voltage (6V)* mV/°C -3
Temperature coefcient of voltage (12V) mV/°C -6
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current (3V)* 6000
DC forward current (6V)* mA 3000
DC forward current (12V) mA 1500
Reverse voltage V 5
Forward voltage (3V, @ 2800mA, 85°C)* V 2.8 3.1
Forward voltage (6V, @ 1400mA, 85°C)* V5.6 6.2
Forward voltage (12V, @ 700mA, 85°C) V 11.2 12.4
LED junction temperature °C 150
Note:
* Data for the 3-V and 6-V congurations are calculated and for reference only.
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
Cree XLamp XHP50.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
33
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLAMP® XHP50.2 LED
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS
The following table provides order codes for XLamp XHP50.2 LEDs. For a complete description of how the ux and chromaticity groups
are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 22).
Binning condition: TJ = 85°C; 12V, IF = 700mA
Reference condition: TJ = 85°C; 6V, IF = 1400mA
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
5000K
70
J4 1120 1239
50E
XHP50B-00-0000-
0D0BJ450E
J2 1040 1151 XHP50B-00-0000-
0D0BJ250E
80
J2 1040 1151
50G
XHP50B-00-0000-
0D0HJ250G
H4 970 1073 XHP50B-00-0000-
0D0HH450G
90
H2 900 996
50G
XHP50B-00-0000-
0D0UH250G
G4 840 930 XHP50B-00-0000-
0D0UG450G
4500K
70
J4 1120 1239
45E
XHP50B-00-0000-
0D0BJ445E
J2 1040 1151 XHP50B-00-0000-
0D0BJ245E
80
J2 1040 1151
45G
XHP50B-00-0000-
0D0HJ245G
H4 970 1073 XHP50B-00-0000-
0D0HH445G
90
H2 900 996
45G
XHP50B-00-0000-
0D0UH245G
G4 840 930 XHP50B-00-0000-
0D0UG445G
4000K
70
J4 1120 1239
40E
XHP50B-00-0000-
0D0BJ440E
J2 1040 1151 XHP50B-00-0000-
0D0BJ240E
80
J2 1040 1151
40H
XHP50B-00-0000-
0D0HJ240H 40G
XHP50B-00-0000-
0D0HJ240G
H4 970 1073 XHP50B-00-0000-
0D0HH440H
XHP50B-00-0000-
0D0HH440G
90
H2 900 996
40H
XHP50B-00-0000-
0D0UH240H 40G
XHP50B-00-0000-
0D0UH240G
G4 840 930 XHP50B-00-0000-
0D0UG440H
XHP50B-00-0000-
0D0UG440G
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
Cree XLamp XHP50.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
44
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLAMP® XHP50.2 LED
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
3500K
70
J4 1120 1239
35E
XHP50B-00-0000-
0D0BJ435E
J2 1040 1151 XHP50B-00-0000-
0D0BJ235E
80
H4 970 1073
35H
XHP50B-00-0000-
0D0HH435H 35G
XHP50B-00-0000-
0D0HH435G
H2 900 996 XHP50B-00-0000-
0D0HH235H
XHP50B-00-0000-
0D0HH235G
90
G4 840 930
35H
XHP50B-00-0000-
0D0UG435H 35G
XHP50B-00-0000-
0D0UG435G
G2 780 863 XHP50B-00-0000-
0D0UG235H
XHP50B-00-0000-
0D0UG235G
3000K
70
J2 1040 1151
30E
XHP50B-00-0000-
0D0BJ230E
H4 970 1073 XHP50B-00-0000-
0D0BH430E
80
H4 970 1073
30H
XHP50B-00-0000-
0D0HH430H 30G
XHP50B-00-0000-
0D0HH430G
H2 900 996 XHP50B-00-0000-
0D0HH230H
XHP50B-00-0000-
0D0HH230G
90
G4 840 930
30H
XHP50B-00-0000-
0D0UG430H 30G
XHP50B-00-0000-
0D0UG430G
G2 780 863 XHP50B-00-0000-
0D0UG230H
XHP50B-00-0000-
0D0UG230G
2700K
80
H2 900 996
27H
XHP50B-00-0000-
0D0HH227H 27G
XHP50B-00-0000-
0D0HH227G
G4 840 930 XHP50B-00-0000-
0D0HG427H
XHP50B-00-0000-
0D0HG427G
90
G2 780 863
27H
XHP50B-00-0000-
0D0UG227H 27G
XHP50B-00-0000-
0D0UG227G
F4 730 808 XHP50B-00-0000-
0D0UF427H
XHP50B-00-0000-
0D0UF427G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - CONTINUED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
Cree XLamp XHP50.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
55
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLAMP® XHP50.2 LED
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS
The following table provides order codes for XLamp XHP50.2 LEDs. For a complete description of how the ux and chromaticity groups
are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 22).
Binning condition: TJ = 85°C; 12V, IF = 700mA
Reference condition: TJ = 85°C; 6V, IF = 1400mA
Reference condition: TJ = 85°C; 3V, IF = 2800mA
3-V XHP50.2 LEDs
Nominal
CCT Chromaticity Regions
CRI Minimum Luminous Flux
Order Code
Min Typ Group Flux l(m)
@ 85°C
Flux (lm)
@ 25°C*
7000K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
068 J4 1120 1239 XHP50B-00-0000-0A00J40DT
6200K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U,
3A, 3B, 3R, 3S
068 J4 1120 1239 XHP50B-00-0000-0A00J4051
6-V & 12-V XHP50.2 LEDs
Nominal
CCT Chromaticity Regions
CRI Minimum Luminous Flux
Order Code
Min Typ Group Flux l(m)
@ 85°C
Flux (lm)
@ 25°C*
7000K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
068 J4 1120 1239 XHP50B-00-0000-0D00J40DT
J2 1040 1151 XHP50B-00-0000-0D00J20DT
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40DT
J2 1040 1151 XHP50B-00-0000-0D0BJ20DT
80 J2 1040 1151 XHP50B-00-0000-0D0HJ20DT
H4 970 1073 XHP50B-00-0000-0D0HH40DT
6500K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
068 J4 1120 1239 XHP50B-00-0000-0D00J40CB
J2 1040 1151 XHP50B-00-0000-0D00J20CB
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40CB
J2 1040 1151 XHP50B-00-0000-0D0BJ20CB
80 J2 1040 1151 XHP50B-00-0000-0D0HJ20CB
H4 970 1073 XHP50B-00-0000-0D0HH40CB
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
Cree XLamp XHP50.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
66
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLAMP® XHP50.2 LED
Nominal
CCT Chromaticity Regions
CRI Minimum Luminous Flux
Order Code
Min Typ Group Flux l(m)
@ 85°C
Flux (lm)
@ 25°C*
6500K 1A, 1B, 1C, 1D
068 J4 1120 1239 XHP50B-00-0000-0D00J40E1
J2 1040 1151 XHP50B-00-0000-0D00J20E1
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40E1
J2 1040 1151 XHP50B-00-0000-0D0BJ20E1
80 J2 1040 1151 XHP50B-00-0000-0D0HJ20E1
H4 970 1073 XHP50B-00-0000-0D0HH40E1
6000K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
068 J4 1120 1239 XHP50B-00-0000-0D00J40DV
J2 1040 1151 XHP50B-00-0000-0D00J20DV
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40DV
J2 1040 1151 XHP50B-00-0000-0D0BJ20DV
80 J2 1040 1151 XHP50B-00-0000-0D0HJ20DV
H4 970 1073 XHP50B-00-0000-0D0HH40DV
90 H2 900 996 XHP50B-00-0000-0D0UH20DV
G4 840 930 XHP50B-00-0000-0D0UG40DV
5700K 2A, 2B, 2C, 2D
068 J4 1120 1239 XHP50B-00-0000-0D00J40E2
J2 1040 1151 XHP50B-00-0000-0D00J20E2
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40E2
J2 1040 1151 XHP50B-00-0000-0D0BJ20E2
80 J2 1040 1151 XHP50B-00-0000-0D0HJ20E2
H4 970 1073 XHP50B-00-0000-0D0HH40E2
90 H2 900 996 XHP50B-00-0000-0D0UH20E2
G4 840 930 XHP50B-00-0000-0D0UG40E2
5000K 3A, 3B, 3C, 3D
068
K2 1200 1328 XHP50B-00-0000-0D00K20E3
J4 1120 1239 XHP50B-00-0000-0D00J40E3
J2 1040 1151 XHP50A-00-0000-0D00J20E3
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40E3
J2 1040 1151 XHP50B-00-0000-0D0BJ20E3
80 J2 1040 1151 XHP50B-00-0000-0D0HJ20E3
H4 970 1073 XHP50B-00-0000-0D0HH40E3
90 H2 900 996 XHP50B-00-0000-0D0UH20E3
G4 840 930 XHP50B-00-0000-0D0UG40E3
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
Cree XLamp XHP50.2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
77
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLAMP® XHP50.2 LED
Nominal
CCT Chromaticity Regions
CRI Minimum Luminous Flux
Order Code
Min Typ Group Flux l(m)
@ 85°C
Flux (lm)
@ 25°C*
4500K 4A, 4B, 4C, 4D
068 J4 1120 1239 XHP50B-00-0000-0D00J40E4
J2 1040 1151 XHP50B-00-0000-0D00J20E4
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40E4
J2 1040 1151 XHP50B-00-0000-0D0BJ20E4
80 J2 1040 1151 XHP50B-00-0000-0D0HJ20E4
H4 970 1073 XHP50B-00-0000-0D0HH40E4
90 H2 900 996 XHP50B-00-0000-0D0UH20E4
G4 840 930 XHP50B-00-0000-0D0UG40E4
4000K 5A, 5B, 5C, 5D
068 J4 1120 1239 XHP50B-00-0000-0D00J40E5
J2 1040 1151 XHP50B-00-0000-0D00J20E5
70 J4 1120 1239 XHP50B-00-0000-0D0BJ40E5
J2 1040 1151 XHP50B-00-0000-0D0BJ20E5
80 H4 970 1073 XHP50B-00-0000-0D0HH40E5
H2 900 996 XHP50B-00-0000-0D0HH20E5
90 H2 900 996 XHP50B-00-0000-0D0UH20E5
G4 840 930 XHP50B-00-0000-0D0UG40E5
3500K 6A, 6B, 6C, 6D 70 J4 1120 1239 XHP50B-00-0000-0D0BJ40E6
J2 1040 1151 XHP50B-00-0000-0D0BJ20E6
3000K 7A, 7B, 7C, 7D 70 J2 1040 1151 XHP50B-00-0000-0D0BJ20E7
H4 970 1073 XHP50B-00-0000-0D0BH40E7
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED
88
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLAMP® XHP50.2 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE
Reference condition: 3-V, IF = 2800mA; 6V, IF = 1400mA; 12V, IF = 700mA
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
6500 K, 68 CRI
3000 K, 80 CRI
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
99
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLAMP® XHP50.2 LED
ELECTRICAL CHARACTERISTICS (TJ = 85°C)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95
Forward Current (mA)
Forward Voltage (V)
3 V
0
250
500
750
1000
1250
1500
1750
2000
2250
2500
2750
3000
5.15 5.25 5.35 5.45 5.55 5.65 5.75 5.85
Forward Current (mA)
Forward Voltage (V)
6 V
1010
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLAMP® XHP50.2 LED
ELECTRICAL CHARACTERISTICS (TJ = 85°C) - CONTINUED
RELATIVE FLUX VS. CURRENT (TJ = 85°C)
Electrical Characteristics (Tj = 85°C)
0
125
250
375
500
625
750
875
1000
1125
1250
1375
1500
10.3 10.5 10.7 10.9 11.1 11.3 11.5 11.7
Forward Current (mA)
Forward Voltage (V)
12 V
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200%
0500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
Relative Luminous Flux
Forward Current (mA)
3 V
1111
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLAMP® XHP50.2 LED
RELATIVE FLUX VS. CURRENT (TJ = 85°C) - CONTINUED
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200%
0250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000
Relative Luminous Flux
Forward Current (mA)
6 V
Relative Intensity vs. Current (Tj = 85°C)
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200%
0125 250 375 500 625 750 875 1000 1125 1250 1375 1500
Relative Luminous Flux
Forward Current (mA)
12 V
1212
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLAMP® XHP50.2 LED
RELATIVE CHROMATICITY VS CURRENT (WARM WHITE)
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
Current (mA)
ΔCCx
ΔCCy
3 V
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000
Current (mA)
ΔCCx
ΔCCy
6 V
1313
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLAMP® XHP50.2 LED
RELATIVE CHROMATICITY VS CURRENT (WARM WHITE) - CONTINUED
RELATIVE CHROMATICITY VS TEMPERATURE (WARM WHITE)
Reference condition: 3V, IF = 2800mA; 6V, IF = 1400mA; 12V, IF = 700mA
Relative Chromaticity Vs. Current, WW
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0125 250 375 500 625 750 875 1000 1125 1250 1375 1500
Current (mA)
ΔCCx
ΔCCy
12 V
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tj (°C)
ΔCCx
ΔCCy
1414
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLAMP® XHP50.2 LED
TYPICAL SPATIAL DISTRIBUTION
Reference condition: TJ = 85°C; 3V, IF = 2800mA; 6V, IF = 1400mA; 12V, IF = 700mA
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Typical Spatial Radiation Pattern
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
0
800
1600
2400
3200
4000
4800
5600
6400
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 2°C/W
Rj-a = 4°C/W
Rj-a = 6°C/W
Rj-a = 8°C/W
3 V
1515
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLAMP® XHP50.2 LED
THERMAL DESIGN - CONTINUED
0
400
800
1200
1600
2000
2400
2800
3200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 2°C/W
Rj-a = 4°C/W
Rj-a = 6°C/W
Rj-a = 8°C/W
6 V
Thermal Design
0
200
400
600
800
1000
1200
1400
1600
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 2°C/W
Rj-a = 4°C/W
Rj-a = 6°C/W
Rj-a = 8°C/W
12 V
1616
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLAMP® XHP50.2 LED
PERFORMANCE GROUPS LUMINOUS FLUX (TJ=85°C)
XLamp XHP50.2 LEDs are tested for luminous ux and placed into one of the following luminous-ux groups.
Group Code Minimum Luminous Flux Maximum Luminous Flux
F4 730 780
G2 780 840
G4 840 900
H2 900 970
H4 970 1040
J2 1040 1120
J4 1120 1200
K2 1200 1290
K4 1290 1380
PERFORMANCE GROUPS CHROMATICITY
XLamp XHP50.2 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Bin Code CCT x y
40H 4000K
0.3777 0.3739
0.3797 0.3816
0.3861 0.3855
0.3838 0.3777
35H 3500K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
1717
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLAMP® XHP50.2 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
50G 5000K 0.3447 0.3553 0.00840 0.00312 65.0
45G 4500K 0.3611 0.3658 0.00852 0.00330 61.5
40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7
35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0
30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2
27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0
45E 4500K 0.3611 0.3658 0.01420 0.00550 61.5
40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7
35E 3500K 0.4073 0.3917 0.01545 0.00690 54.0
30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2
ANSI White Bins ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y
7000 K
0A0
0.2950 0.2970
7000 K
0R0
0.2980 0.2880
7000 K
1A0
0.3048 0.3207
0.2920 0.3060 0.2950 0.2970 0.3130 0.3290
0.2984 0.3133 0.3009 0.3042 0.3144 0.3186
0.3009 0.3042 0.3037 0.2937 0.3068 0.3113
0B0
0.2920 0.3060
0S0
0.2895 0.3135
1B0
0.3028 0.3304
0.2895 0.3135 0.2870 0.3210 0.3115 0.3391
0.2962 0.3220 0.2937 0.3312 0.3130 0.3290
0.2984 0.3133 0.2962 0.3220 0.3048 0.3207
0C0
0.2984 0.3133
0T0
0.2962 0.3220
1C0
0.3115 0.3391
0.2962 0.3220 0.2937 0.3312 0.3205 0.3481
0.3028 0.3304 0.3005 0.3415 0.3213 0.3373
0.3048 0.3207 0.3028 0.3304 0.3130 0.3290
0D0
0.2984 0.3133
0U0
0.3037 0.2937
1D0
0.3130 0.3290
0.3048 0.3207 0.3009 0.3042 0.3213 0.3373
0.3068 0.3113 0.3068 0.3113 0.3221 0.3261
0.3009 0.3042 0.3093 0.2993 0.3144 0.3186
1818
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLAMP® XHP50.2 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
ANSI White Bins ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y
7000 K
1R0
0.3068 0.3113
6000K
2A0
0.3215 0.3350
6000K
2R0
0.3222 0.3243
0.3144 0.3186 0.3290 0.3417 0.3290 0.3300
0.3161 0.3059 0.3290 0.3300 0.3290 0.3180
0.3093 0.2993 0.3222 0.3243 0.3231 0.3120
1S0
0.3005 0.3415
2B0
0.3207 0.3462
2S0
0.3196 0.3602
0.3099 0.3509 0.3290 0.3538 0.3290 0.3690
0.3115 0.3391 0.3290 0.3417 0.3290 0.3538
0.3028 0.3304 0.3215 0.3350 0.3207 0.3462
1T0
0.3099 0.3509
2C0
0.3290 0.3538
2T0
0.3290 0.3690
0.3196 0.3602 0.3376 0.3616 0.3381 0.3762
0.3205 0.3481 0.3371 0.3490 0.3376 0.3616
0.3115 0.3391 0.3290 0.3417 0.3290 0.3538
1U0
0.3144 0.3186
2D0
0.3290 0.3417
2U0
0.3290 0.3300
0.3221 0.3261 0.3371 0.3490 0.3366 0.3369
0.3231 0.3120 0.3366 0.3369 0.3361 0.3245
0.3161 0.3059 0.3290 0.3300 0.3290 0.3180
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
5000K
3A0
0.3371 0.3490
4500K
4A0
0.3530 0.3597
0.3451 0.3554 0.3615 0.3659
0.3440 0.3427 0.3512 0.3465
0.3366 0.3369 0.3515 0.3487
3B0
0.3376 0.3616
4B0
0.3548 0.3736
0.3463 0.3687 0.3641 0.3804
0.3451 0.3554 0.3530 0.3597
0.3371 0.3490 0.3533 0.362
3C0
0.3463 0.3687
4C0
0.3641 0.3804
0.3551 0.3760 0.3736 0.3874
0.3533 0.3620 0.3702 0.3722
0.3451 0.3554 0.3615 0.3659
3D0
0.3451 0.3554
4D0
0.3615 0.3659
0.3533 0.3620 0.3702 0.3722
0.3515 0.3487 0.3670 0.3578
0.3440 0.3427 0.3590 0.3521
1919
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLAMP® XHP50.2 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
ANSI White Bins ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y
4000K
5A0
0.3670 0.3578
3500K
6A0
0.3889 0.3690
3000K
7A0
0.4147 0.3814
0.3702 0.3722 0.3941 0.3848 0.4221 0.3984
0.3825 0.3798 0.4080 0.3916 0.4342 0.4028
0.3783 0.3646 0.4017 0.3751 0.4259 0.3853
5B0
0.3702 0.3722
6B0
0.3941 0.3848
7B0
0.4221 0.3984
0.3736 0.3874 0.3996 0.4015 0.4299 0.4165
0.3869 0.3958 0.4146 0.4089 0.4430 0.4212
0.3825 0.3798 0.4080 0.3916 0.4342 0.4028
5C0
0.3825 0.3798
6C0
0.4080 0.3916
7C0
0.4342 0.4028
0.3869 0.3958 0.4146 0.4089 0.4430 0.4212
0.4006 0.4044 0.4299 0.4165 0.4562 0.4260
0.3950 0.3875 0.4221 0.3984 0.4465 0.4071
5D0
0.3783 0.3646
6D0
0.4017 0.3751
7D0
0.4259 0.3853
0.3825 0.3798 0.4080 0.3916 0.4342 0.4028
0.3950 0.3875 0.4221 0.3984 0.4465 0.4071
0.3898 0.3716 0.4147 0.3814 0.4373 0.3893
CREE’S EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
6500 K
8000 K
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 5-Step
EasyWhite 3-Step
EasyWhite 2-Step
2020
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLAMP® XHP50.2 LED
CREE’S ANSI COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
CB
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DT
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DV
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E1
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E2
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
51
2121
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLAMP® XHP50.2 LED
CREE’S ANSI WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D
5A
5B
5C
5D
6A
6B
6C
6D
7A
7B
7C
7D
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
CCy
CCx
E3
E4
E5
E6
E7
ANSI
C78.377A
2222
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLAMP® XHP50.2 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes for XHP50.2 LEDs are congured in the following manner:
Order Code Bin Code
SSSSSS-BD-GGGG-HJKLMMNNN
Series
XHP50B = XHP50.2
Internal code
Minimum luminous flux group
Chro maticity group
CRI specificat ion
0 = No Minimum CRI
B = 70 CRI Minimum
H = 80 CRI Minimum
U = 90 CRI Minimum
Vf Cl ass
A = 3-V
D = 6-V/12-V configurable
Configuration
B = Internal code
D = Ree l s iz e
SSSSSS-E-NNN-MMM-JK-L-PP
Series
XHP50B = XHP50.2
Chromaticity group
Vf Cl as s
A = 3-V
D = 6-V/12-V configurable
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Internal code
Voltage performance group
Luminous flux group
Internal code
Order code & bin code headings
and diagrams are in a table
2323
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLAMP® XHP50.2 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XHP50.2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a
general guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax) 170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL) 217 °C
Time Maintained Above: Time (tL)45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
2424
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLAMP® XHP50.2 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Crees control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre-Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Crees pre-release qualication testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life
(RTOL) testing on the XHP50.2 LED.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Crees lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XHP50.2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in
conditions of 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
2525
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLAMP® XHP50.2 LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
2626
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLAMP® XHP50.2 LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All dimensions are ±.13mm unless otherwise indicated.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.85
4.78
4.78
.50
.50
.50
2.78
2.14
.50
3.50
.56
.65
2.78
4.78
.50 .50
.50
4.78
4.78
.50
.50
2.14
2.14
.50
.50
.50
.50
4.78
4.78
4.78 .50
.50
.80
.25
.97
.80
.25
2.14
1/114.000
A
2610-00073
XHP50B OUTLINE
8/22/16D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
OPTICAL REFERENCE
RECOMMENDED PCB SOLDER PAD
6V
RECOMMENDED PCB SOLDER PAD
12V
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
OPTICAL REFERENCE
Bottom View
Side View
Top View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.85
4.78
4.78
.50
.50
.50
2.78
2.14
.50
3.50
.56
.65
2.78
4.78
.50 .50
.50
4.78
4.78
.50
.50
2.14
2.14
.50
.50
.50
.50
4.78
4.78
4.78 .50
.50
.80
.25
.97
.80
.25
2.14
1/114.000
A
2610-00073
XHP50B OUTLINE
8/22/16D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
OPTICAL REFERENCE
RECOMMENDED PCB SOLDER PAD
6V
RECOMMENDED PCB SOLDER PAD
12V
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
OPTICAL REFERENCE
Anode
Side
Cathode
Side
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.85
4.78
4.78
.50
.50
.50
2.78
2.14
.50
3.50
.56
.65
2.78
4.78
.50 .50
.50
4.78
4.78
.50
.50
2.14
2.14
.50
.50
.50
.50
4.78
4.78
4.78 .50
.50
.80
.25
.97
.80
.25
2.14
1/114.000
A
2610-00073
XHP50B OUTLINE
8/22/16D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
OPTICAL REFERENCE
RECOMMENDED PCB SOLDER PAD
6V
RECOMMENDED PCB SOLDER PAD
12V
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
OPTICAL REFERENCE
Recommended PCB Solder Pad
6V Conguration
(thermal pad is electrically isolated)
Recommended PCB Solder Pad
12V Conguration
(thermal pad is connected to anode and cathode
and is not electrically isolated)
2727
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLAMP® XHP50.2 LED
MECHANICAL DIMENSIONS - CONTINUED
ELECTRICAL CONFIGURATION
NEGATIVE A
NEGATIVE B
POSITIVE A
POSITIVE A
12 V
6 V
NEGATIVE B POSITIVE B
SOLDER PAD LINK
NEGATIVE A
NEGATIVE B
POSITIVE A
POSITIVE A
12 V
6 V
NEGATIVE B POSITIVE B
SOLDER PAD LINK
6-V Conguration 12-V Conguration
Recommended Stencil Pattern
6V & 12V Congurations
(shaded area is open)
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.85
4.78
4.78
.50
.50
.50
2.78
2.14
.50
3.50
.56
.65
2.78
4.78
.50 .50
.50
4.78
4.78
.50
.50
2.14
2.14
.50
.50
.50
.50
4.78
4.78
4.78 .50
.50
.80
.25
.97
.80
.25
2.14
1/114.000
A
2610-00073
XHP50B OUTLINE
8/22/16D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
OPTICAL REFERENCE
RECOMMENDED PCB SOLDER PAD
6V
RECOMMENDED PCB SOLDER PAD
12V
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
OPTICAL REFERENCE
2828
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLAMP® XHP50.2 LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions are ±.13mm unless otherwise indicated.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
Loaded Pockets
(500 Lamps)
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(40 empty pockets min.)
12
1.75
4
83.7
1.5 4
5.3
0.36
7.0"
1/13.000
B
2402-00055
XHP50 LOADING SPEC
--
--
----
----
12/9/14D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B REVERSED POLARITY IN VIEW DC 1/6/15
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
User Feed Direction
13mm
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
Loaded Pockets
(500 Lamps)
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(40 empty pockets min.)
12
1.75
4
83.7
1.5 4
5.3
0.36
7.0"
1/13.000
B
2402-00055
XHP50 LOADING SPEC
--
--
----
----
12/9/14D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B REVERSED POLARITY IN VIEW DC 1/6/15
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
User Feed Direction
13mm
2929
Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLAMP® XHP50.2 LED
PACKAGING
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #