Cree(R) XLamp(R) XHP50.2 LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS The XLamp XHP50.2 LED is the next * Available in white, configurable to Characteristics...............................................2 generation of Extreme High Power LEDs 3V, 6V or 12V by PCB layout Flux Characteristics, EasyWhite(R) Order that delivers the lowest system cost * Available in 5-step EasyWhite(R) bins through the best lumen density, reliability at 3000K to 5000K CCT, 3-step Flux Characteristics, ANSI White Order and color consistency. Built on Cree's EasyWhite bins at 2700K to 5000K Codes and Bins..............................................5 latest highpower LED technology, the and 2-step EasyWhite bins at 2700K Relative Spectral Power Distribution............8 XHP50.2 LED improves the lumen density, to 4000K CCT Relative Flux vs. Junction Temperature........8 voltage characteristics, reliability and optical performance of the XHP50 LED in the same 5.0 mm x 5.0 mm footprint. The new XHP50.2 LED provides an easy dropin * Available in ANSI white bins at 3000K to 7000K CCT * Available in standard, 70-, 80-, and 90minimum CRI options Codes and Bins..............................................3 Electrical Characteristics...............................9 Relative Flux vs. Current............................. 10 Relative Chromaticity vs Current................ 12 Relative Chromaticity vs Temperature....... 13 upgrade to achieve higher system LPW * Binned at 85C Typical Spatial Distribution......................... 14 for lighting manufacturers with existing * Maximum drive current: 6000mA Thermal Design........................................... 14 XHP50 designs, eliminating redesign costs. (3V), 3000mA (6V), 1500mA (12V) Performance Groups - Luminous Flux..... 16 Its unparalleled lumen density and longer * Low thermal resistance: 1.2C/W Performance Groups - Chromaticity......... 16 lifetime at higher operating temperatures * Wide viewing angle: 120 Cree's EasyWhite(R) Chromaticity Regions also enables new and innovative lighting * Unlimited floor life at Plotted on the 1931 CIE Curve................... 19 designs at lower system costs. 30C/85% RH * Reflow solderable - JEDEC JSTD020C Cree's ANSI Cool White Kits Plotted on ANSI Standard Chromaticity Regions........ 20 Cree's ANSI Warm and Neutral White Kits * RoHS and REACh compliant Plotted on ANSI Standard Chromaticity * UL recognized component Regions........................................................ 21 (R) (E349212) Bin and Order Code Formats...................... 22 Reflow Soldering Characteristics............... 23 Notes........................................................... 24 WWW.CREE.COM/XLAMP Mechanical Dimensions............................. 26 Electrical Configuration.............................. 27 Tape and Reel.............................................. 28 Packaging.................................................... 29 Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 CLD-DS150 REV 1B PRODUCT FAMILY DATA SHEET XLAMP (R) XHP50.2 LED CHARACTERISTICS XHP50.2 LEDs are tested and binned in production in the 12V configuration. See the Mechanical Dimensions section on page 26 for pad layout options. Characteristics Unit Thermal resistance, junction to solder point C/W 1.2 degrees 120 Temperature coefficient of voltage (3V)* mV/C -1.5 Temperature coefficient of voltage (6V)* mV/C -3 Temperature coefficient of voltage (12V) mV/C -6 Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical V Maximum 8000 DC forward current (3V)* 6000 DC forward current (6V)* mA 3000 DC forward current (12V) mA 1500 Reverse voltage V 5 Forward voltage (3V, @ 2800mA, 85C)* V 2.8 3.1 Forward voltage (6V, @ 1400mA, 85C)* V 5.6 6.2 Forward voltage (12V, @ 700mA, 85C) V 11.2 12.4 LED junction temperature C 150 Note: * Data for the 3V and 6V configurations are calculated and for reference only. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLAMP (R) XHP50.2 LED FLUX CHARACTERISTICS, EASYWHITE(R) ORDER CODES AND BINS The following table provides order codes for XLamp XHP50.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 22). Binning condition: TJ = 85C; 12V, IF = 700mA Reference condition: TJ = 85C; 6V, IF = 1400mA CRI Nominal CCT Min Typ Minimum Luminous Flux Group Flux (lm) @ 85C Flux (lm) @ 25C* J4 1120 1239 J2 1040 1151 J2 1040 1151 H4 970 1073 H2 900 996 2-Step Group Order Code 3-Step Group Order Code 70 5000K 80 50G 50G XHP50B-00-00000D0UG450G 930 J4 1120 1239 J2 1040 1151 J2 1040 1151 H4 970 1073 XHP50B-00-00000D0HH445G H2 900 996 XHP50B-00-00000D0UH245G G4 840 930 J4 1120 1239 J2 1040 1151 J2 1040 1151 45E 90 45G XHP50B-00-00000D0HJ240H H4 970 1073 XHP50B-00-00000D0HH440H H2 900 996 XHP50B-00-00000D0UH240H G4 840 930 90 40H XHP50B-00-00000D0UG440H 40G 40G XHP50B-00-00000D0BJ245E XHP50B-00-00000D0UG445G 40E 40H XHP50B-00-00000D0BJ445E XHP50B-00-00000D0HJ245G 70 80 XHP50B-00-00000D0BJ250E XHP50B-00-00000D0UH250G 840 45G XHP50B-00-00000D0BJ450E XHP50B-00-00000D0HH450G G4 80 Order Code XHP50B-00-00000D0HJ250G 70 4000K Group 50E 90 4500K 5-Step XHP50B-00-00000D0BJ440E XHP50B-00-00000D0BJ240E XHP50B-00-00000D0HJ240G XHP50B-00-00000D0HH440G XHP50B-00-00000D0UH240G XHP50B-00-00000D0UG440G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp XHP50.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLAMP (R) XHP50.2 LED FLUX CHARACTERISTICS, EASYWHITE(R) ORDER CODES AND BINS - CONTINUED CRI Nominal CCT Min Typ Minimum Luminous Flux Group Flux (lm) @ 85C Flux (lm) @ 25C* J4 1120 1239 2-Step Group Order Code 3-Step Group Order Code 70 3500K Group 35E J2 1040 1151 H4 970 1073 H2 900 996 XHP50B-00-00000D0HH235H G4 840 930 XHP50B-00-00000D0UG435H G2 780 863 J2 1040 1151 80 35H 90 35H XHP50B-00-00000D0HH435H XHP50B-00-00000D0UG235H 35G 35G 970 1073 H4 970 1073 H2 900 996 G4 840 930 80 30H 90 30H XHP50B-00-00000D0HH430H XHP50B-00-00000D0HH230H XHP50B-00-00000D0UG430H G2 780 863 XHP50B-00-00000D0UG230H H2 900 996 XHP50B-00-00000D0HH227H G4 840 930 XHP50B-00-00000D0HG427H G2 780 863 XHP50B-00-00000D0UG227H F4 730 808 80 27H 2700K 90 27H XHP50B-00-00000D0UF427H 30G 30G 27G 27G XHP50B-00-00000D0BJ435E XHP50B-00-00000D0BJ235E XHP50B-00-00000D0HH235G XHP50B-00-00000D0UG435G XHP50B-00-00000D0UG235G 30E H4 Order Code XHP50B-00-00000D0HH435G 70 3000K 5-Step XHP50B-00-00000D0BJ230E XHP50B-00-00000D0BH430E XHP50B-00-00000D0HH430G XHP50B-00-00000D0HH230G XHP50B-00-00000D0UG430G XHP50B-00-00000D0UG230G XHP50B-00-00000D0HH227G XHP50B-00-00000D0HG427G XHP50B-00-00000D0UG227G XHP50B-00-00000D0UF427G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp XHP50.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLAMP (R) XHP50.2 LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS The following table provides order codes for XLamp XHP50.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 22). Binning condition: TJ = 85C; 12V, IF = 700mA Reference condition: TJ = 85C; 6V, IF = 1400mA Reference condition: TJ = 85C; 3V, IF = 2800mA 3V XHP50.2 LEDs CRI Nominal CCT Chromaticity Regions 7000K 6200K Minimum Luminous Flux Min Typ Group Flux l(m) @ 85C Flux (lm) @ 25C* Order Code 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U 0 68 J4 1120 1239 XHP50B-00-0000-0A00J40DT 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 0 68 J4 1120 1239 XHP50B-00-0000-0A00J4051 6-V & 12V XHP50.2 LEDs Nominal CCT 7000K CRI Chromaticity Regions 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U Minimum Luminous Flux Min Typ 0 68 70 80 6500K 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 0 70 80 68 Order Code Group Flux l(m) @ 85C Flux (lm) @ 25C* J4 1120 1239 XHP50B-00-0000-0D00J40DT J2 1040 1151 XHP50B-00-0000-0D00J20DT J4 1120 1239 XHP50B-00-0000-0D0BJ40DT J2 1040 1151 XHP50B-00-0000-0D0BJ20DT J2 1040 1151 XHP50B-00-0000-0D0HJ20DT H4 970 1073 XHP50B-00-0000-0D0HH40DT J4 1120 1239 XHP50B-00-0000-0D00J40CB J2 1040 1151 XHP50B-00-0000-0D00J20CB J4 1120 1239 XHP50B-00-0000-0D0BJ40CB J2 1040 1151 XHP50B-00-0000-0D0BJ20CB J2 1040 1151 XHP50B-00-0000-0D0HJ20CB H4 970 1073 XHP50B-00-0000-0D0HH40CB Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp XHP50.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLAMP (R) XHP50.2 LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED Nominal CCT 6500K CRI Chromaticity Regions 1A, 1B, 1C, 1D Minimum Luminous Flux Min Typ 0 68 70 80 0 6000K 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 68 70 80 90 0 68 70 5700K 2A, 2B, 2C, 2D 80 90 0 5000K 3A, 3B, 3C, 3D 70 80 90 68 Order Code Group Flux l(m) @ 85C Flux (lm) @ 25C* J4 1120 1239 XHP50B-00-0000-0D00J40E1 J2 1040 1151 XHP50B-00-0000-0D00J20E1 J4 1120 1239 XHP50B-00-0000-0D0BJ40E1 J2 1040 1151 XHP50B-00-0000-0D0BJ20E1 J2 1040 1151 XHP50B-00-0000-0D0HJ20E1 H4 970 1073 XHP50B-00-0000-0D0HH40E1 J4 1120 1239 XHP50B-00-0000-0D00J40DV J2 1040 1151 XHP50B-00-0000-0D00J20DV J4 1120 1239 XHP50B-00-0000-0D0BJ40DV J2 1040 1151 XHP50B-00-0000-0D0BJ20DV J2 1040 1151 XHP50B-00-0000-0D0HJ20DV H4 970 1073 XHP50B-00-0000-0D0HH40DV H2 900 996 XHP50B-00-0000-0D0UH20DV G4 840 930 XHP50B-00-0000-0D0UG40DV J4 1120 1239 XHP50B-00-0000-0D00J40E2 J2 1040 1151 XHP50B-00-0000-0D00J20E2 J4 1120 1239 XHP50B-00-0000-0D0BJ40E2 J2 1040 1151 XHP50B-00-0000-0D0BJ20E2 J2 1040 1151 XHP50B-00-0000-0D0HJ20E2 H4 970 1073 XHP50B-00-0000-0D0HH40E2 H2 900 996 XHP50B-00-0000-0D0UH20E2 G4 840 930 XHP50B-00-0000-0D0UG40E2 K2 1200 1328 XHP50B-00-0000-0D00K20E3 J4 1120 1239 XHP50B-00-0000-0D00J40E3 J2 1040 1151 XHP50A-00-0000-0D00J20E3 J4 1120 1239 XHP50B-00-0000-0D0BJ40E3 J2 1040 1151 XHP50B-00-0000-0D0BJ20E3 J2 1040 1151 XHP50B-00-0000-0D0HJ20E3 H4 970 1073 XHP50B-00-0000-0D0HH40E3 H2 900 996 XHP50B-00-0000-0D0UH20E3 G4 840 930 XHP50B-00-0000-0D0UG40E3 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp XHP50.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLAMP (R) XHP50.2 LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED Nominal CCT CRI Chromaticity Regions Minimum Luminous Flux Min Typ 0 68 70 4500K 4A, 4B, 4C, 4D 80 90 0 70 4000K 5A, 5B, 5C, 5D 80 90 3500K 6A, 6B, 6C, 6D 70 3000K 7A, 7B, 7C, 7D 70 68 Order Code Group Flux l(m) @ 85C Flux (lm) @ 25C* J4 1120 1239 XHP50B-00-0000-0D00J40E4 J2 1040 1151 XHP50B-00-0000-0D00J20E4 J4 1120 1239 XHP50B-00-0000-0D0BJ40E4 J2 1040 1151 XHP50B-00-0000-0D0BJ20E4 J2 1040 1151 XHP50B-00-0000-0D0HJ20E4 H4 970 1073 XHP50B-00-0000-0D0HH40E4 H2 900 996 XHP50B-00-0000-0D0UH20E4 G4 840 930 XHP50B-00-0000-0D0UG40E4 J4 1120 1239 XHP50B-00-0000-0D00J40E5 J2 1040 1151 XHP50B-00-0000-0D00J20E5 J4 1120 1239 XHP50B-00-0000-0D0BJ40E5 J2 1040 1151 XHP50B-00-0000-0D0BJ20E5 H4 970 1073 XHP50B-00-0000-0D0HH40E5 H2 900 996 XHP50B-00-0000-0D0HH20E5 H2 900 996 XHP50B-00-0000-0D0UH20E5 G4 840 930 XHP50B-00-0000-0D0UG40E5 J4 1120 1239 XHP50B-00-0000-0D0BJ40E6 J2 1040 1151 XHP50B-00-0000-0D0BJ20E6 J2 1040 1151 XHP50B-00-0000-0D0BJ20E7 H4 970 1073 XHP50B-00-0000-0D0BH40E7 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). * Cree XLamp XHP50.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLAMP (R) XHP50.2 LED Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION 100% Relative Radiant Power 80% 60% 6500 K, 68 CRI 3000 K, 80 CRI 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) RELATIVE FLUX VS. JUNCTION TEMPERATURE Relative Flux Output vs. Junction Temperature Reference condition: 3V, IF = 2800mA; 6V, IF = 1400mA; 12V, IF = 700mA 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLAMP (R) XHP50.2 LED ELECTRICAL CHARACTERISTICS (TJ = 85C) 6000 5500 Forward Current (mA) 5000 4500 4000 3500 3V 3000 2500 2000 1500 1000 500 0 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 Forward Voltage (V) 3000 2750 Forward Current (mA) 2500 2250 2000 1750 6V 1500 1250 1000 750 500 250 0 5.15 5.25 5.35 5.45 5.55 5.65 5.75 5.85 Forward Voltage (V) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLAMP (R) XHP50.2 LED Electrical Characteristics (Tj = 85C) ELECTRICAL CHARACTERISTICS (TJ = 85C) - CONTINUED 1500 1375 Forward Current (mA) 1250 1125 1000 875 750 12 V 625 500 375 250 125 0 10.3 10.5 10.7 10.9 11.1 11.3 11.5 11.7 Forward Voltage (V) RELATIVE FLUX VS. CURRENT (TJ = 85C) 200% 180% Relative Luminous Flux 160% 140% 120% 100% 3V 80% 60% 40% 20% 0% 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Forward Current (mA) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLAMP (R) XHP50.2 LED RELATIVE FLUX VS. CURRENT (TJ = 85C) - CONTINUED 200% 180% Relative Luminous Flux 160% 140% 120% 100% 6V 80% 60% 40% 20% 0% 0 250 500 1000 1250 1750 2000 Relative Intensity vs. 750 Current (Tj 1500 = 85C) Forward Current (mA) 2250 2500 2750 3000 200% Relative Luminous Flux 180% 160% 140% 120% 100% 12 V 80% 60% 40% 20% 0% 0 125 250 375 500 625 750 875 1000 1125 1250 1375 1500 Forward Current (mA) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLAMP (R) XHP50.2 LED RELATIVE CHROMATICITY VS CURRENT (WARM WHITE) 0.020 0.016 0.012 3V 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Current (mA) 0.020 0.016 0.012 6V 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 Current (mA) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLAMP (R) XHP50.2 LED Relative Chromaticity Vs. Current,(WARM WW RELATIVE CHROMATICITY VS CURRENT WHITE) - CONTINUED 0.020 0.016 0.012 12 V 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 125 250 375 500 625 750 875 1000 1125 1250 1375 1500 Current (mA) RELATIVE CHROMATICITY VS TEMPERATURE (WARM WHITE) Relative Chromaticity Temperature Reference condition: 3V, IF Vs. = 2800mA; 6V, WW IF = 1400mA; 12V, IF = 700mA 0.020 0.016 0.012 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 25 50 75 100 125 150 Tj (C) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLAMP (R) XHP50.2 LED TYPICAL SPATIAL DISTRIBUTION Typical Spatial Radiation Pattern Reference condition: TJ = 85C; 3V, IF = 2800mA; 6V, IF = 1400mA; 12V, IF = 700mA Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 6400 Maximum Current (mA) 5600 3V 4800 4000 3200 2400 Rj-a = 2C/W Rj-a = 4C/W 1600 Rj-a = 6C/W 800 0 Rj-a = 8C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLAMP (R) XHP50.2 LED THERMAL DESIGN - CONTINUED 3200 Maximum Current (mA) 2800 6V 2400 2000 1600 1200 Rj-a = 2C/W Rj-a = 4C/W 800 Rj-a = 6C/W 400 0 Rj-a = 8C/W 0 20 Thermal Design 40 60 80 100 120 140 160 Ambient Temperature (C) 1600 Maximum Current (mA) 1400 12 V 1200 1000 800 600 Rj-a = 2C/W Rj-a = 4C/W 400 Rj-a = 6C/W 200 0 Rj-a = 8C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLAMP (R) XHP50.2 LED PERFORMANCE GROUPS - LUMINOUS FLUX (TJ=85C) XLamp XHP50.2 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Minimum Luminous Flux Maximum Luminous Flux 780 F4 730 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 K4 1290 1380 PERFORMANCE GROUPS - CHROMATICITY XLamp XHP50.2 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures - 2-Step Bin Code 40H 35H 30H 27H CCT 4000K 3500K 3000K 2700K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLAMP (R) XHP50.2 LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) EasyWhite Color Temperatures - 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle () 5000K 0.3447 0.3553 0.00840 0.00312 65.0 45G 4500K 0.3611 0.3658 0.00852 0.00330 61.5 40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis Bin Code CCT 50G Center Point EasyWhite Color Temperatures - 5-Step Ellipse Center Point x y a b Rotation Angle () 5000K 0.3447 0.3553 0.01400 0.00520 65.0 45E 4500K 0.3611 0.3658 0.01420 0.00550 61.5 40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7 35E 3500K 0.4073 0.3917 0.01545 0.00690 54.0 30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2 Bin Code CCT 50E ANSI White Bins CCT Bin Code 0A0 0B0 7000 K 0C0 0D0 ANSI White Bins x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2920 CCT Bin Code ANSI White Bins x y 0.2980 0.2880 x y 0.3048 0.3207 0.2950 0.2970 0.3009 0.3042 0.3130 0.3290 0.3144 0.3186 0.3042 0.3037 0.3060 0.2895 0.2937 0.3068 0.3113 0.3135 0.3028 0.2895 0.3135 0.3304 0.2870 0.3210 0.3115 0.3391 0.2962 0.3220 0.2984 0.3133 0.2937 0.3312 0.3130 0.3290 0.2962 0.3220 0.3048 0.2984 0.3133 0.3207 0.2962 0.3220 0.3115 0.3391 0.2962 0.3220 0.3028 0.3304 0.2937 0.3312 0.3205 0.3481 0.3005 0.3415 0.3213 0.3048 0.3373 0.3207 0.3028 0.3304 0.3130 0.3290 0.2984 0.3133 0.3037 0.2937 0.3130 0.3290 0.3048 0.3207 0.3009 0.3042 0.3213 0.3373 0.3068 0.3113 0.3068 0.3113 0.3221 0.3261 0.3009 0.3042 0.3093 0.2993 0.3144 0.3186 0R0 0S0 7000 K 0T0 0U0 CCT Bin Code 1A0 1B0 7000 K 1C0 1D0 Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLAMP (R) XHP50.2 LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) ANSI White Bins CCT Bin Code 1R0 1S0 7000 K 1T0 1U0 ANSI White Bins x y 0.3068 0.3113 CCT 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.3005 0.3415 0.3099 0.3509 0.3115 0.3391 0.3028 0.3304 0.3099 0.3509 0.3196 0.3602 0.3205 0.3481 0.3115 Bin Code ANSI White Bins x y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3215 0.3350 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3391 0.3290 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3161 0.3059 2A0 2B0 6000K 2C0 2D0 x y 0.3222 0.3243 0.3290 0.3300 0.3290 0.3180 0.3231 0.3120 0.3196 0.3602 0.3290 0.3690 0.3290 0.3538 0.3207 0.3462 0.3290 0.3690 0.3381 0.3762 0.3376 0.3616 0.3417 0.3290 0.3538 0.3290 0.3417 0.3290 0.3300 0.3371 0.3490 0.3366 0.3369 0.3366 0.3369 0.3361 0.3245 0.3290 0.3300 0.3290 0.3180 ANSI White Bins CCT Bin Code 3A0 3B0 5000K 3C0 3D0 CCT Bin Code 2R0 2S0 6000K 2T0 2U0 ANSI White Bins x y 0.3371 0.3451 0.3440 0.3427 0.3366 0.3376 CCT Bin Code x y 0.3490 0.3530 0.3597 0.3554 0.3615 0.3659 0.3512 0.3465 0.3369 0.3515 0.3487 0.3616 0.3548 0.3736 0.3463 0.3687 0.3641 0.3804 0.3451 0.3554 0.3530 0.3597 0.3371 0.3490 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3451 0.3554 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3440 0.3427 4A0 4B0 4500K 4C0 4D0 0.3533 0.362 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3615 0.3659 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3590 0.3521 Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLAMP (R) XHP50.2 LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) ANSI White Bins CCT Bin Code 5A0 5B0 4000K 5C0 5D0 ANSI White Bins x y 0.3670 0.3578 CCT 0.3702 0.3722 0.3825 0.3798 0.3783 0.3646 0.3702 0.3722 0.3736 0.3874 0.3869 0.3958 0.3825 0.3798 0.3825 0.3798 0.3869 0.3958 0.4006 0.4044 0.3950 Bin Code ANSI White Bins x y 0.3889 0.3690 0.3941 0.3848 0.4080 0.3916 0.4017 0.3751 0.3941 0.3848 0.3996 0.4015 0.4146 0.4089 0.4080 0.3916 0.4080 0.3916 0.4146 0.4089 0.4299 0.4165 0.3875 0.4221 0.3783 0.3646 0.3825 0.3798 0.3950 0.3875 0.3898 0.3716 6A0 6B0 3500K 6C0 6D0 CCT Bin Code x y 0.4147 0.3814 0.4221 0.3984 0.4342 0.4028 0.4259 0.3853 0.4221 0.3984 0.4299 0.4165 0.4430 0.4212 0.4342 0.4028 0.4342 0.4028 0.4430 0.4212 0.4562 0.4260 0.3984 0.4465 0.4071 0.4017 0.3751 0.4259 0.3853 0.4080 0.3916 0.4342 0.4028 0.4221 0.3984 0.4465 0.4071 0.4147 0.3814 0.4373 0.3893 7A0 7B0 3000K 7C0 7D0 CREE'S EASYWHITE(R) CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE 0.44 ANSI C78.377 Quadrangle 0.43 EasyWhite 5-Step EasyWhite 3-Step 0.42 3500 K EasyWhite 2-Step 0.41 2700 K 3000 K 4000 K 0.40 4500 K 0.39 5000 K 0.38 CCy 0.37 5700 K 0.36 6500 K 0.35 0.34 8000 K 0.33 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 CCx Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLAMP (R) XHP50.2 LED CREE'S ANSI COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.40 0.40 5000 K 0.39 0.38 0.38 5700 K 5700 K 0.37 0.37 6500 K 6500 K 2T 0.36 0.36 2S DT 0.34 0T 0C 0B 2U 0A ANSI C78.377A 1U 0D 0C 2A 0B 1U 0D 1R 0U 0.36 0.35 0.34 0.33 0.28 0.36 0.35 0.34 0.33 0.32 0.31 0.28 0.30 0.28 0.32 0R 0.29 CCx 0.40 0.40 5000 K 0.39 0.38 0.38 3S 6500 K 2C 8000 K 0.34 0T 0C 1U 0A ANSI C78.377A 2R 1A 1U 1R 0U 0.36 0.35 0.34 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 0.29 0.33 0R 0R 0.29 2U 1D 0D 0A 0.30 0.29 0.28 0C 0B 0.31 1R 0U 0.30 0S 0.32 3R 2A 1B 0.32 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 2D 1C 0.31 0B 1D 3A 2B 1S 0.30 0S 0.32 3R 2A 1B 0.34 0.29 0.33 3B 2C 1T 8000 K 2D 1C 2T 2S 0.35 3A 2B 1S 0.36 3B 2S 1T 3S 51 6500 K 2T E1 0.35 5700 K 0.37 CCy 0.36 5000 K 0.39 5700 K 0.37 CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 5700 K DV 0.37 6500 K 0.36 6500 K 0.32 1R CCx 0.36 0.29 0.28 0.36 0.35 0.34 0.33 0.28 0.32 0.28 0.31 0.29 0.30 1R 0R 0R 0.29 ANSI C78.377A 2R 1U 0U 0.30 0.29 0.28 2U 1D 1A 0D 0A 0U 0.30 0C 0B 0.31 3R 2A 1B 0.35 0A CCy 1U 0S 2D 1C 0.34 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2B 1S 0.32 0C 0B 1D 8000 K 0.34 0.31 0S 0.32 2A 1B 2C 1T 0.30 0T 0.33 2D 3B 2S 0.35 2B 1C 3S 2T 0.36 1T 1S E2 0.37 2C 8000 K 0.34 5700 K 2T 2S 0.35 5000 K 0.39 0.33 CCy ANSI C78.377A 2R CCx CCy 2U 1D 1A 0A 0R 0.29 0S 2D 1C 1B 0.30 0.29 0.28 0T 0.31 1R 2B 1S 0.32 0U 0.30 0.34 0.33 2R 1A 2C 1T 8000 K 0.31 0.31 2A 1D 2S 0.30 0S 0.32 2D 1C 1B 2T CB 0.35 2B 1S 0.33 2C 1T 0.29 8000 K CCy 0.35 CCy 5000 K 0.39 CCx Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLAMP (R) XHP50.2 LED CREE'S ANSI WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.45 0.44 2700 K 3000 K 0.43 E7 0.42 3500 K 4000 K CCy 0.40 0.39 5000 K 0.38 E4 4B 3C 0.36 3B 3D 0.35 7B 6C 6B 7D 7A 5C 6D 5B 4C E3 0.37 E5 4500 K 7C E6 0.41 6A ANSI C78.377A 5D 5A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLAMP (R) XHP50.2 LED BIN AND ORDER CODE FORMATS Bin codes and order codes for XHP50.2 LEDs are configured in the following manner: Order Code Bin Code Series XHP50B = XHP50.2 Series XHP50B = XHP50.2 Internal code Chromaticity group Minimum luminous flux group Vf Class A = 3-V D = 6-V/12-V configurable SSSSSS-BD-GGGG-HJKLMMNNN Chromaticity group CRI specification 0 = No Minimum CRI B = 70 CRI Minimum H = 80 CRI Minimum U = 90 CRI Minimum CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum SSSSSS-E-NNN-MMM-JK-L-PP Vf Class A = 3-V D = 6-V/12-V configurable Internal code Configuration B = Internal code D = Reel size Luminous flux group Voltage performance group Internal code Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLAMP (R) XHP50.2 LED REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XHP50.2 LEDs to be compatible with JEDEC JSTD020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 C Time Within 5C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLAMP (R) XHP50.2 LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life (RTOL) testing on the XHP50.2 LED. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XHP50.2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLAMP (R) XHP50.2 LED NOTES - CONTINUED UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLAMP (R) XHP50.2 LED 6 5 4 3 6 5 4 3 2 NOTICE NOTICE 6 4 3 REV CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION 5 REE CONFIDENTIAL. THIS PLOT AND THE INFORMATION REV CONTAINED ARE THE PROPRIETARY AND MECHANICAL ONTAINED WITHIN WITHIN ARE DIMENSIONS THE PROPRIETARY AND NOTICE CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT ONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION MAY BE COPIED, REPRODUCED OR DISCLOSED MAY NOT BE NOT COPIED, REPRODUCED OR DISCLOSED ANY TO ANY AND CONTAINED WITHIN ARE THETO PROPRIETARY UNAUTHORIZED PERSON THEWITHOUT WRITTEN CONSENT NAUTHORIZED THE WITHOUT WRITTEN CONSENT INFORMATION OF CREE, INC. THIS PLOT CREE PERSON INC. F CREEOF INC. Thermal vias, ifCONFIDENTIAL present, are not shown on these drawings. MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON THEWITHOUT WRITTEN CONSENT OF CREE INC. All dimensions are .13mm unless otherwise indicated. D OPTICAL REFERENCE OPTICAL REFERENCE D OPTICAL REFERENCE 5.00 5.00 .65 .65 5.00 R2.85 .50 .50 4.78 2.78 4.78 2.78 .50 .50 .50 .65 R2.85 4.78 2.78 .50 .50 .50 .50 R2.85 .50 .50 5.00 5.00 D 4.78 4.78 5.00 Cathode Side 2.14 2.14 Anode Side C .56 .56 C OPTICAL REFERENCE OPTICAL REFERENCE .56 3.50 3.50 OPTICAL REFERENCE Top View 3.50 Side View Bottom View .25 4.78 4.78 .50 .50 4.78 .50 .50 2.78 .50 2.78 4.78 4.78 2.78 2.14 4.78 .50 .50 2.14 B 4.78 .50 .50 .50 .50 .50 4.78 .50 B .50 .50 4.78 .50 4.78 4.78 .25 4.78 2.14 .25 4.78 4.78 4.78.80 .50 .80 .50 2.14 2.14 .80 .97 2.14 .50 .50 A 4 4.78 .50 .50 .50 .50 .50 .50 RECOMMENDE RECOMMENDED STENCI (HATCHED(HATCHED AREA IS OA 6v/12v .50 RECOMMENDED PCBPAD SOLDER PAD RECOMMENDED PCBPAD SOLDER PAD RECOMMENDED PCB SOLDER RECOMMENDED PCB SOLDER 12V Recommended PCB Solder Pad 6V Recommended PCB Solder Pad 12V 6V DRA DA DRAWN BY RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD UNLESS OTHERWISE SPE UNLESS OTHERWISE SPECIFIED D. C 12V Configuration 6V Configuration D. CRONIN 8/2 DIMENSIONS ARE IN 12V DIMENSIONS ARE IN 6V CHE MILLIMETERS AND AFTER CHECK DA MILLIMETERS AND AFTER FINISH. UNLES (thermal pad is connected to anode and cathode (thermal pad is electrically isolated) TOLERANCE UNLESS SPE TOLERANCE UNLESS SPECIFIED: A DIM .25 MILLIM APP .XX .25.XX DA .XXXAPPROVED .125 and is not electrically isolated) .XXX .125 X .5 X .5 TOLER THIRDPROJECTION ANGLE PROJECTION THIRD ANGLE MA MATERIAL FOR SHEET METAL PART FOR SHEET METAL PARTS ONLY .X 1.5 .X 1.5 THIRD ANGLE .XX PROJECTIO .75 FOR S .XX .75 .XXXFINAL .25 PROTEC FINA .XXX .25X X .5 .5 1.6 ALL DIMENSIONS ARE .13MM UNLESS OTHERWISE NOTED SURFACE SURFACE 1.6 FINISH: FINISH: ALL DIMENSIONS ARE UNLESS .13MMOTHERWISE UNLESS OTHERWISE ALL DIMENSIONS ARE .13MM NOTED NOTED 6 6 5 6 5 4 5 4 3 4 3 2 3 Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 26 SURF .50 4.78 2.14 (R) XLAMP XHP50.2 LED C .56 3.50 MECHANICAL DIMENSIONS - CONTINUED .25 .80 4.78 .50 .50 .50 2.14 12 V .50 4.78 4.78 SOLDER PAD LINK B .50 .25 .80 2.14 POSITIVE A .97 4.78 .50 Recommended Stencil Pattern RECOMMENDED STENCIL PATTERN 6V & 12V Configurations (HATCHED AREA IS OPENING) 6v/12v (shaded area is open) NEGATIVE B ECOMMENDED PCB SOLDER PAD 12V DATE BY UNLESS OTHERWISE DRAWN SPECIFIED 4600 Silicon Drive D. CRONIN8/22/16 DIMENSIONS ARE IN Durham, N.C 27703 CHECK DATE MILLIMETERS AND AFTER FINISH. Phone (919) 313-5300 TOLERANCE UNLESS SPECIFIED: Fax (919) 313-5558 .XX .25 DATE APPROVED A TITLE .XXX .125 ELECTRICAL CONFIGURATION X .5 THIRD ANGLE PROJECTION XHP50B OUTLINE MATERIAL FOR SHEET METAL PARTS ONLY 12 V .X 1.5 6V DRAWING NO. SIZE .XX .75 SOLDER PAD LINK REV. M UNLESS OTHERWISE NOTED .XXX .25 FINAL PROTECTIVE FINISH 2610-00073 C A X .5 SCALE SHEET OF 1/1 1.6 SURFACE FINISH: 14.000 4 3 2 NEGATIVE A POSITIVE A NEGATIVE B POSITIVE B 1 POSITIVE A NEGATIVE B 6-V Configuration 12-V Configuration 6V NEGATIVE A POSITIVE A NEGATIVE B POSITIVE B Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 27 6 5 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND 6 5 CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OTICE UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT THIS PLOT AND THE INFORMATION OF CREE INC. RE THE PROPRIETARY AND MATION OF CREE, INC. THIS PLOT REPRODUCED OR DISCLOSED TO ANY ON WITHOUTTHE WRITTEN CONSENT 4 3 REV 4 3 2 REVISONS REV B B XLAMP XHP50.2 LED (R) DESCRIPTION REVERSED POLARITY IN VIEW D TAPE AND REEL All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions are .13mm unless otherwise indicated. 1.5 4 User Feed Direction 4 1.5 CATHODE SIDE 4 8 END 4 8 User Feed Direction END CATHODE SIDE 1.75 START 1.75 START 3.7 12 C 12 ANODE SIDE Trailer 160mm ANODE (min) of empty pockets Loaded sealed withPockets tape (500 Lamps) (15 pockets min.) Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) SIDE 5.3 Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) Loaded Pockets (500 Lamps) Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 0.36 User Feed Direction User Feed Direction B 13mm 13mm 7.0" A 7.0" THIRD ANGLE PROJECTION 6 5 4 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: DATE DRAWN BY .XX .25 UNLESS OTHERWISE SPECIFIED .XXX .125 D. CRONIN 12/9/14 DIMENSIONS ARE IN X .5 CHECK DATE MILLIMETERS AND AFTER THIRD FINISH. ANGLE PROJECTION FOR SHEET METAL PARTS ONLY --TOLERANCE UNLESS SPECIFIED: .XX .25 .X 1.5 APPROVED DATE .XX .75 TITLE .XXX .125 --X .5 .XXX .25 X .5 MATERIAL FOR SHEET METAL PARTS ONLY 5 4 3 C A M XHP50 LOAD .X .XX .XXX X 1.5 .75 .25 .5 SURFACE FINISH: 1.6 6 D -3 SIZE FINAL PROTECTIVE FINISH -- F SURFACE FINISH: 1.6 SCALE DRAWING NO. C 2402 3.000 2 Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 28 XLAMP (R) XHP50.2 LED PACKAGING Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 29