1. Product profile
1.1 General description
The device is designed to protect in-vehicle ultra high-speed interfaces in automotive
applications, such as Low-Voltage Differential Signaling (LVDS), High-Definition
Multimedia Interface (HDMI) and DisplayPort interfaces against ElectroStatic
Discharge (ESD).
The device is housed in an ultra small SOT1165- 1 (XSON10) Surface-Mounted
Design (SMD) plastic package.
1.2 Features and benefits
System ESD protection for LVDS, HDMI and DisplayPort interfaces
Line capacitance of only 0.6 pF with 0.05 pF matching capacitance between
signal pairs
Ultra small XSON10 package with design-friendly ‘pass-thru’ signal routing
AEC-Q101 qualified
1.3 Applications
The devices are desig ned for high-speed receiver and transmitter port protection:
Automotive A/V monitors, displays and cameras
1.4 Quick reference data
[1] This parameter is guaranteed by design.
PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
Rev. 3 — 5 July 2016 Product data sheet
Table 1. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff voltage - - 5.5 V
Cch channel capacitance f = 1 MHz;
Vbias =2.5V [1] -0.6-pF
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 2 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
2. Pinning information
3. Ordering information
4. Limiting values
[1] Device stressed with ten non-repetitive ESD pulses.
[2] All pins to ground.
Table 2. Pinning
Pin Symbol Description Simplified outline Graphic symbol
1CH1negative channel 1
ESD protection
XSON10
2 CH1+ positive channel 1
ESD protection
3 GND ground
4CH2negative channel 2
ESD protection
5 CH2+ positive channel 2
ESD protection
6 n.c. not connected
7 n.c. not connected
8 GND ground
9 n.c. not connected
10 n.c. not connected
15
10
4
7
3
8
2
96
Transparent top view
24
3, 8 001aai619
1 5
Table 3. Ordering i nformation
Type number Package
Name Description Version
PESD1LVDS XSON10 plastic extremely thin small outline package; no leads;
10 terminal s ; bo d y 1 2.5 0.5 mm SOT1165-1
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Tstg storage temperature 55 +125 C
Tamb ambient temperature 40 +125 C
Table 5. ESD maximum ratings
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Max Unit
VESD electrostatic
discharge voltage IEC 61000-4-2
(contact discharge) [1][2] -8kV
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 3 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
5. Characteristics
[1] This parameter is guaranteed by design.
[2] Between signal pin and pin n.c.
Table 6. ESD standards compliance
Standard Conditions
IEC 61000-4-2; level 4 (ESD) > 8 kV (contact)
MIL-STD-883; class 3B (human body model) > 8 kV
Fig 1. ESD pulse waveform according to IEC 61000-4-2
001aaa631
IPP
100 %
90 %
t
30 ns
60 ns
10 %
tr = 0.6 ns to 1 ns
Table 7. Characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff voltage - - 5.5 V
IRM reverse leakage current per channel;
V=3.0V --1A
VBR breakdown voltage I = 1 mA 6 - 9 V
VFforward voltage - 0.7 - V
C(I/O-GND) input/output to ground
capacitance f=1MHz;
Vbias =2.5V [1] -0.6-pF
C(I/O-GND) input/output to ground
capacitance variation f=1MHz;
Vbias =2.5V [1] -0.05-pF
Cch(mutual) mutual cha nnel
capacitance f=1MHz;
Vbias =2.5V [1][2] -0.07-pF
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 4 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
Fig 2. ESD clamping test setup and waveforms
50 Ω
RZ
CZ
DUT
(DEVICE
UNDER
TEST)
GND
GND
450 Ω
RG 223/U
50 Ω coax
ESD TESTER
IEC 61000-4-2 network
CZ = 150 pF; RZ = 330 Ω
4 GHz DIGITAL
OSCILLOSCOPE
10x
ATTENUATOR
unclamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
unclamped –8 kV ESD pulse waveform
(IEC 61000-4-2 network)
vertical scale = 2 kV/div
horizontal scale = 15 ns/div
vertical scale = 2 kV/div
horizontal scale = 15 ns/div
GND
clamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
006aac764
GND
clamped –8 kV ESD pulse waveform
(IEC 61000-4-2 network)
vertical scale = 20 V/div
horizontal scale = 10 ns/div
vertical scale = 20 V/div
horizontal scale = 10 ns/div
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 5 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
6. Application information
The devices are desig ned to provide high-level ESD protection for high-speed serial
data buses such as LVDS, HDMI and DisplayPort data lines.
When designing the Printed-Circu it Board (PCB), careful consideration should be given to
impedance matching, and signal coupling.
Basic application diagrams for the ESD protection of an HDMI interface are shown in
Figure 3.
Fig 3. Application diagram of HDMI ESD protection
006aac617
n.c.
CEC
TMDS_D2+
GND
TMDS_GND
TMDS_D1+
TMDS_GND
TMDS_D0+
TMDS_GND
TMDS_CLK+
TMDS_GND
TMDS_CLK–
DDC_CLK
DDC_DAT
GND
+5 V
HOT PLUG DETECTION
PESD1LVDS
TMDS_D1–
TMDS_D2–
TMDS_CH2+
TMDS_CH1+
TMDS_CH1–
TMDS_CH2–
TMDS_CH2+
TMDS_CH1+
TMDS_CH1–
TMDS_CH2–
GND
TMDS_D0–
HDMI
CONNECTOR
PESD1LVDS
5
4
2
1
38
8
5
4
2
1
3
654
100 nF
123
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 6 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
7. Test information
7.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in auto motive applications.
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 7 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
8. Package outline
Fig 4. Package outline SOT1165-1 (XSON10)
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1165-1 - - -
- - -
sot1165-1_po
13-01-09
13-02-18
Unit
mm
max
nom
min
0.5 0.05
0.00
0.25
0.20
0.15
0.45
0.40
0.35
2.6
2.5
2.4
1.1
1.0
0.9 0.2
0.43
0.38
0.33
0.05
A
Dimensions
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
DFN2510-10: plastic, extremely thin small outline package; no leads;
10 terminals; body 1 x 2.5 x 0.5 mm SOT1165-1
A1c
0.127
bb
1D(1) E(1) e
0.5
e1
2
kLv
0.1
wy
0.05
y1
0.05
0 1 2 mm
scale
- - -
X
C
y
C
y1
B A
terminal 1
index area
D
E
detail X
A
c
A1
b
k
L
b1
e1
eAC B
v
Cw
terminal 1
index area
10 6
Terminal#3 identification
51
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 8 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
9. Soldering
Reflow soldering is the only recommended soldering method.
Fig 5. Reflow soldering footprint SOT1165-1 (XSON10)
SOT1165-1
Remark:
Stencil of 75 μm is recommended.
A stencil of 75 μm gives an aspect ratio of 0.77
With a stencil of 100 μm one will obtain an aspect ratio of 0.58
Footprint information for reflow soldering of DFN2510-10 package
solder land plus solder paste
occupied area
solder land
solder paste deposit
solder resist
Dimensions in mm
Ay By C D Hy
1.3 0.25 0.525 0.20
D1
0.40
P
0.500 1.6
Hx
2.45
Generic footprint pattern
Refer to the package outline drawing for actual layout
sot1165-1_fr
Hx
ByHy
0.05
C
P
D0.05
D1
Ay
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 9 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
10. Revision history
Table 8. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PESD1LVDS v.3 20160705 Product data sheet - PESD1LVDS v.2
Modifications: Table 4 “Limiting values : updated maximum ambient temperature Tamb from +85 C to
+125 C
PESD1LVDS v.2 20130123 Product data sheet - PESD1LVDS v.1
PESD1LVDS v.1 20111010 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 10 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
11. Legal information
11.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may di ffe r in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not b e relied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre va il.
Product specificat io n — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
11.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warrant ies, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no
responsibility for the content in this document if provided by an information
source outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use in automotive applications — This Nexperia
product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support , life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. Nexperia and its suppliers accept no liability for
inclusion and/or use of Nexperia products in such equipment or
applications and t her efo re su ch inclu si on a nd/or use is at the cu stome r's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Custo mers should provide appropriate
design and operating safeguards to minimize the risks associate d with t heir
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party custo mer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by cust omer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contain s data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
PESD1LVDS All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 3 — 5 July 2016 11 of 12
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
No offer to sell or license — Nothing in this document may be interpret ed or
construed as an of fer to se ll product s that is op en for accept ance or the grant ,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
11.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respective ow ners.
12. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia PESD1LVDS
ESD protection for in-vehicle ultra high-speed interfaces
13. Contents
1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Application information. . . . . . . . . . . . . . . . . . . 5
7 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 6
7.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 6
8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7
9 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9
11 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
11.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
11.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12 Contact information. . . . . . . . . . . . . . . . . . . . . 11
13 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
05 July 2016