66
Incandescent Lamps LEDs LEDs Neon Lamps
AC or DC DC AC AC or DC
7A is 12V Amber 3900 is 1.7V Red 5A is 125-250V Amber 2A is 105-130V Amber
7B is 12V Blue 3901 is 2.2V Amber 5B is 125-250V Blue 2C is 105-130V Clear
7C is 12V Clear 3902 is 2.1V Green 5C is 125-250V Clear 2G is 105-130V Green
7G is 12V Green 5G is 125-250V Green 2R is 105-130V Red
7R is 12V Red 39006 is 6V Red 5R is 125-250V Red
39016 is 6V Amber 3A is 250V Amber
8A is 24V Amber 39026 is 6V Green 3C is 250V Clear
8B is 24V Blue 3G is 250V Green
8C is 24V Clear 39007 is 12V Red 3R is 250V Red
8G is 24V Green 39017 is 12V Amber
8R is 24V Red 39027 is 12V Green
39008 is 24V Red
39018 is 24V Amber
39028 is 24V Green
For LH, if lamp not required, state “COLOR” only
WL
Wire Leads
C
6.3 Tab
H
4.8 Tab
T
Solder
LAMP TYPE VOLTAGE & COLOR
CODES for FL & LH CODES for LE CODES for NL
TERMINAL
CODES
MODEL
CODES
SERIES
CODES
Technical & Order Information - Indicators
61
62
63
67
382
392
692
67
81
145
177
180 AA/BB
195 00/ BB
196
233
234
245
273 / LL
275 / C
276
277
278
568 A/ B
569
579
581
582
586
589
1041
1045
2950
2951
2760
2820
2821
2870
3130
3160
3161
3221
LH
Lamp Holders
6, 12, 24V
only
FL
Incandescent
Lamps
LE
LEDs
NL
Neon Lamps
NL 589 WL 2G
ORDER FORMAT SERIES MODEL TERMINAL LAMP / VOLTAGE / COLOR
CODES CODES CODES CODES
Authority
European
UL
The majority of Arcolectric indicator lights can be supplied with alternative light sources:
Neon, Fluorescent, Filament lamp or LED.
NEON and FLUORESCENT LAMPS
Colors
Available with Red, Amber, Green or Clear lenses.
Maximum striking voltages
Standard brightness types 65Vac 90Vdc.
High brightness types 85Vac 135Vdc.
High brightness types are usually fitted.
Life
Typically 25,000 hours (Green fluorescent lamps 20,000 hours). (Measured to a point
when the light output of the lamp is half its original level.)
The end of life for a neon lamp is not usually a sudden failure.
False signals due to long wiring
It is possible for neon or fluorescent tubes to glow when they should be off. The false
signal is caused by the capacitance effect of fairly long wiring to the indicator being
adjacent to other live cables. This effect can be prevented in most cases by fitting a 100k
resistor across the supply wires close to the indicator assembly.
MATERIALS
Moulded bodies and bases Nylon 6.6
Metal bodies and bezels Chrome plated brass (except #)
Lenses Polycarbonate
Terminals (most types) Brass (electro-tin plated)
Terminals (exceptions) Brass (flash silver* or nickel** plated)
Threaded metal nuts Brass (nickel plated on 0275/7)
Other fixings Call factory for details
* R9, 0061, 0062, 0430, 0480, 1090, 1091, 6030, 7030, 8630, 8580
** # 3130, 3160, 3161, 3221 have nickel plated terminals with steel screws and plated
polyamide bezel trims
SYMBOLS
TEMPERATURE RATING
FILAMENT LAMPS
Colors
Available with Red, Amber, Green, Clear or Blue lenses.
LEDs - DC
Colors
Red, Yellow, Green, Blue and White.
Voltage
Basic voltage 2.0/2.2V. Some items are available with integral resistors for 12V use.
For details of resistors required for higher voltages, please call the factory.
Current
Maximum continuous forward current 20mA.
Life
>100,000hrs
LEDs - AC
Colors
Red, Yellow, Green, Blue and White.
Voltage
Rated up to 230V ac, suitable for use at 110V and 230V ac.
Current
<3mA
Life
>100,000hrs
Terminals Wire leads Solid wires Panel hole size Panel thickness Temperature rating
C 6.3, H 4.8, K 2.8 200mm long Standard LED only
with Terminals with Wire leads
PVC SILICONE
T125°C T125°C
T105°C
T65/75°C T65/75°C
ARCOLECTRIC CORPORATION 31-315 Plantation Drive, Thousand Palms, CA 92276 Tel: 760-343-3650 Fax: 760-343-3651 email: info@arcolectric.com