3MTM MetPakTM HM Header 2 mm Type B25, 125/175 Contacts, 5 Row, Straight HM Series * * * * Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 63 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool * End-to-end stackable with 5 row 3MTM MetPakTM CP2, HM and HSHM products * See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3mconnector.com for compliance information Date Modified: November 16, 2010 TS-2006-B Sheet 1 of 3 Physical Insulation: Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0 Color: Material: Copper Alloy Plating: See Ordering information Marking: 3M Logo, Part Number, Revision, Date Code Performance Mechanical: Normal Force (Nominal): 0.57 N [58 g] Signal Engagement Force (Nominal): 0.32 N [33 g] Signal Separation Force (Nominal): 0.20 N [20 g] Signal Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal Mate/Unmate Cycles: 250 Application: This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101) Electrical: Current Rating (Fully Loaded): 1 A @ 70 C Signal, 8.25 A at 70xC Power Insulation Resistance: 1 x 104 M @ 100 VDC Withstanding Voltage: 750 Vrms Environmental Temperature Rating: -55 C to 125 C Process Rating: Maximum 260C (per J-STD-020C) Withstanding Voltage: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com MetPak is a trademark of 3M Company. 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM HM Header 2 mm Type B25, 125/175 Contacts, 5 Row, Straight mm 49.85 1.963 2.00 .079 mm (Inch) Tolerance Unless Noted 0 3 HM Series 1 2 3 4 5 6 7 8 9 2.00 .079 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 ROW F ROW E 0.0 0.00 0.3 0.13 ROW D C L ROW C C L ROW B [ ] Dimensions for Reference Only 12.00 .472 ROW A ROW Z C L 48.00 1.890 15.40 .606 5.00mm .197 1.50 .059 Ground contacts Signal contacts 13.40 .528 DIM A DIM B DIM A = Pin mating length DIM B = Pin tail length 4.50 .177 15.15 .596 HM-HXXXXX-5XXX-XXXXX REV X XXYY This view shown with protective cap* * Cap to be removed after press-fit installation process Ordering Information HM - H125B1 - 5CX1 - XXXXX HM - H175B2 - 5BX1 - XXXXX Tail Style: P = Press-fit tail S = Solder tail Standard configuration DIM A = 5.3 mm for rows A through E DIM B = 4.4 For non-standard configurations contact sales representative (rows F and Z not loaded) (rows F and Z loaded 8.3 mm mate length) Plating m [ " ]: TG30 = 0.76 [30] Min. Au Contact Area 2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply) 1.27 [50] Min. Ni All over Standard Option TG30L = 0.76 [30] Min. Au Contact Area, Lubricated 2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply) 1.27 [50] Min. Ni All over Typically higher make order quantities as compared to TG30. TG50 = 1.27 [50] Min. Au Contact Area, Lubricated 2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply) 1.27 [50] Min. Ni All over Non-Standard Option (Available with longer lead times and higher make order quantities, MOQ) TS-2006-B Sheet 2 of 3 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM HM Header 2 mm Type B25, 125/175 Contacts, 5 Row, Straight HM Series Hole Plating Table Finished Hole Dia. "D" Cu. Thickness SnPb Thickness Drilled Hole Dia. 0.550 - 0.650 [.0217 - .0256] 0.025 - 0.045 [.0010 - .0018] 0.008 - 0.018 [.0003 - .0007] 0.686 - 0.727 [.0270 - .0286] TS-2006-B Sheet 3 of 3 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. (c) 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.