http://www.tracopower.com Page 1 of 6
AC/DC Power Modules
TML Series, 5 to 30 Watt
The TML series are ultra compact AC/DC power supplies in a fully encapsulated
plastic case. They feature versions with screw terminals for easy installation or with
solder pins for direct PCB mounting. International safety approvals qualify this
product for worldwide markets. The TML series AC/DC modules offer an interesting
solution for many space critical applications in commercial and industrial electronic
equipment.
Features
◆ Encapsulated power Supplies
◆ PCB mount or chassis mount with
screw terminals
◆ Single, dual and triple output models
◆ Universal input 85–264 VAC, 47–440 Hz
◆ EMI meets EN 55022, class B and
FCC, level B
◆ Low ripple and noise
◆ Short circuit and overload protection
◆ 3-year product warranty
Order Code Output Power
max.
Output 1 Output 2 Output 3
TML 05105 5 VDC/1000 mA
TML 05112 12 VDC/416 mA
TML 05115 15 VDC/333 mA
TML 05124 5 Watt 24 VDC/200 mA
TML 05205 5 VDC/500 mA –5 VDC/500 mA
TML 05212 12 VDC/200 mA –12 VDC/200 mA
TML 05215 15 VDC/160 mA –15 VDC/160 mA
TML 10105 5 VDC/2000 mA
TML 10112 12 VDC/833 mA
TML 10115 15 VDC/666 mA
TML 10124 10 Watt 24 VDC/416 mA
TML 10205 5 VDC/800 mA –5 VDC/800 mA
TML 10212 12 VDC/380 mA –12 VDC/380 mA
TML 10215 15 VDC/300 mA –15 VDC/300 mA
Models
UL 60950-1LVD
http://www.tracopower.com Page 2 of 6
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
AC/DC Power Modules
TML Series 5 to 30 Watt
Input Specifications
Input voltage ranges – AC input 85–264 VAC
– DC Input TML 30 models: 100 – 370 VDC
output power derating 1 %/V below 110 VDC
other models: 85 – 370 VDC
output power derating 0.8 %/V below 110 VDC
Input frequency 47–440 Hz
Input current no load 115 VAC / 230 VAC
TML 5 models: 10 mA / 15 mA typ
TML 10 models: 15 mA / 20 mA typ
TML 15 models: 18 mA / 25 mA typ.
TML 30 models: 30 mA / 55 mA typ.
Input current full load 115 VAC / 230 VAC
TML 5 models: 160 mA / 80 mA typ.
TML 10 models: 200 mA / 120 mA typ
TML 15 models: 280 mA / 165 mA typ.
TML 30 models: 550 mA / 320 mA typ.
External fuse (required) 1.5 A slow blow type (recommendation)
Order Code Output Power Output 1 Output 2 Output 3
PCB-mounting Chassis mounting max.
TML 15105 TML 15105C 5 VDC/3000 mA
TML 15112 TML 15112C 12 VDC/1250 mA
TML 15115 TML 15115C 15 VDC/1000 mA
TML 15124 TML 15124C 24 VDC/625 mA
TML 15205 TML 15205C 15 Watt 5 VDC/1500 mA –5 VDC/1500 mA
TML 15212 TML 15212C 12 VDC/650 mA –12 VDC/650 mA
TML 15215 TML 15215C 15 VDC/500 mA –15 VDC/500 mA
TML 15512 TML 15512C 5 VDC/2000 mA 12 VDC/200 mA –12 VDC/200 mA
TML 15515 TML 15515C 5 VDC/2000 mA 15 VDC/150 mA –15 VDC/150 mA
TML 30103 TML 30103C 3.3 VDC/6000 mA
TML 30105 TML 30105C 5 VDC/6000 mA
TML 30112 TML 30112C 12 VDC/2500 mA
TML 30115 TML 30115C 15 VDC/2000 mA
TML 30124 TML 30124C 24 VDC/1250 mA
TML 30205 TML 30205C 30 Watt 5 VDC/3000 mA –5 VDC/3000 mA
TML 30212 TML 30212C 12 VDC/1300 mA –12 VDC/1300 mA
TML 30215 TML 30215C 15 VDC/1000 mA –15 VDC/1000 mA
TML 30252 TML 30252C *5 VDC/3000 mA *12 VDC/1250 mA
TML 30512 TML 30512C * 5 VDC/3000 mA 12 VDC/630 mA –12 VDC/630 mA
TML 30515 TML 30515C *5 VDC/3000 mA 15 VDC/500 mA –15 VDC/500 mA
Models
* Output floating
http://www.tracopower.com Page 3 of 6
AC/DC Power Modules
TML Series 5 to 30 Watt
Output Specifications
Voltage set accuracy ± 2 %
Regulation – Input variation 0.3 % max.
– Load variation (10–100%)
single output models: 1.0 % max.
dual / triple output models: 5 % max.
Minimum load single output models: 5 %
dual output models: 3 % (each output)
triple output 15W models: 10 % (main output only)
triple output 30W models: 20 % (each output)
Ripple and noise (20 MHz bandwidth) – 3.3 & 5 VDC output models: <1.5 % of Vout
– other models: <1.0 % of Vout
Current limitation 120– 80 % fold back
Short circuit protection hiccup mode, indefinite (automatic recovery)
Maximum capacitive load 470–50’000 µF depending on model
General Specifications
Temperature ranges – Operating –25 °C to +60 °C
– Power derating above 50 °C 3.75 %/°C
– Storage (non operating) –40 °C to +85 °C
Temperature coefficient 0.02 %/°C
Efficiency 72–80 % (depending on model)
Humidity (non condensing) 95 % rel max.
Switching frequency 100 kHz typ. (pulse width modulation PWM)
Hold-up time 40 ms min. (Vin 115...230 VAC)
Isolation voltage – Input/Output 3‘000 VAC
Reliability /calculated MTBF (MIL-HDBK-217F ground benign) >660’000 h @ 25 °C
EMI / RFI conducted EN 55022, class B, FCC part 15, level B
EMC compliance – Electrostatic discharge ESD IEC / EN 61000-4-2 4 kV / 8 kV
– RF field susceptibility IEC / EN 61000-4-3 3 V/m
– Electrical fast transients/bursts on mainsline IEC / EN 61000-4-4 1 kV
Safety class II (only 30 watt models) to IEC / EN 60536
Safety standards UL 60950-1, IEC 60950-1, EN 60950-1
Safety approval cUL/UL File E188913
www.ul.com -> certifications
Case material plastic resin + fiberglass
(flammability to UL 94-V0)
All specifications valid at nominal input voltage, full load and +25 °C after warm-up time unless otherwise stated.
http://www.tracopower.com Page 4 of 6
AC/DC Power Modules
TML Series 5 to 30 Watt
Outline Dimensions
TML 5 Models
Pin diameter ø 1.0 mm
TML 10 Models
Weight: 80 g (2.8 oz)
Weight: 95 g (3.4 oz)
( ) = Inches
Tolerances = 0.5mm (0.02)
1
2
3
4
5
6
45.0
(1.77)
17.5 ±0.3
(
0.69
±0.012
)
17.5 ±0.3
(
0.69
±0.012
)
4.0
(0.16)
47.0 ±0.3
(1.85 ±0.012)
55.0
(2.17)
10 ±0.3
(0.39 ±0.012)
10 ±0.3
(0.39 ±0.012)
20.5
(0.81)
10
(0.39)
Bottom view
Bottom view
1
2
3
4
5
45.0
(1.77)
20.5
(0.79)
10
(0.39)
17.5 ±0.3
(
0.69
±0.012
)
4.0
(0.16)
6
17.5 ±0.3
(
0.69
±0.012
)
54.0 ±0.3
(2.13 ±0.012)
64.0
(2.52)
10 ±0.3
(0.39 ±0.012)
10 ±0.3
(0.39 ±0.012)
Pin diameter ø 1.0 mm
Pin Single Dual
1FG FG
2AC(N) AC(N)
3AC(L) AC(L)
4–V out –V out
5NC Common
6+V out +V out
Pin-Out
Pin Single Dual
1FG FG
2AC(N) AC(N)
3AC(L) AC(L)
4–V out –V out
5NC Common
6+V out +V out
Pin-Out
NC = Not to connect
NC = Not to connect
http://www.tracopower.com Page 5 of 6
AC/DC Power Modules
TML Series 5 to 30 Watt
Outline Dimensions
TML 15 Models
PCB mounting:
TML 15-C Models
Chassis mounting:
Bottom view
1
2
38
7
6
5
4
54.0
(2.13)
20.0 ±0.3
(
0.79
±0.012
)
20.0 ±0.3
(
0.79
±0.012
)
6.0
(0.24)
62.0 ±0.3
(2.44 ±0.012)
74.0
(2.91)
8.5 ±0.3
(0.33 ±0.012)
8.5 ±0.3
(0.33 ±0.012)
11.5 ±0.3
(0.45 ±0.012)
11.5 ±0.3
(0.45 ±0.012)
22.0
(0.87)
10
(0.39)
Top view
54.0
(2.13)
5.0
(0.20)
86.0 ±0.3
(3.39 ±0.012)
96.0
(3.78)
4 x ø3.5
(4 x ø0.14)
1
2
3
8
7
6
5
4
26.5
(1.04)
5.0
(0.20)
46.0
±0.3
(
1.81
±0.012
)
Weight: 120 g (4.2 oz)
Pin diameter ø 1.0 mm
Weight: 150 g (5.3 oz)
Pin Single Dual Triple
1FG FG FG
2AC(N) AC(N) AC(N)
3AC(L) AC(L) AC(L)
4No Pin No Pin –V out 3
5–V out –V out Com. 2/3
6No Pin Common +V out 2
7+V out +V out –V out 1
8No Pin No Pin +V out 1
Pin-Out
Page 6 of 6
J
enatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
AC/DC Power Modules
TML Series 5 to 30 Watt
TML 30 Models
PCB mounting:
1
27
6
5
4
3
Bottom view
63.5
(2.50)
27.9 ±0.3
(
1.10
±0.012
)
3.8
(0.15)
81.3 ±0.3
(3.20 ±0.012)
88.9
(3.50)
15.24 ±0.3
(0.60 ±0.012)
12.7 ±0.3
(0.50 ±0.012)
12.7 ±0.3
(0.50 ±0.012)
15.24 ±0.3
(0.60 ±0.012)
25.0
(0.98)
6
(0.24)
27.9 ±0.3
(
1.10
±0.012
)
Top view
1
2
7
6
5
4
3
31.0
(1.22)
5.5
(0.22)
64.7
(2.55)
50.0
±0.3
(
1.97
±0.012
)
6.0
(0.20)
100.0 ±0.3
(3.94 ±0.012)
112.0
(4.41)
4 x ø3.5
(4 x ø0.14)
NC
TML 30-C Models
Chassis mounting:
Weight : 230 g (8.1 oz)
Pin diameter ø 1.0 mm
Weight : 275 g (9.7 oz) Dimensions in[mm], () = Inches
Tolerances = 0.5mm (0.02)
Pin Single Dual sym.
Dual asym.
Triple
1AC(N) AC(N) AC(N) AC(N)
2AC(L) AC(L) AC(L) AC(L)
3+V out +V out +V out 2 +V out 2
4No Pin No Pin +V out 1 +V out 1
5–V out Common –V out 2 Com. 2/3
6No Pin No Pin –V out 1 –V out 1
7NC. –V out NC. –V out 3
Pin-Out
Rev. 10/08
Specifications can be changed any time without notice.
Outline Dimensions
NC = Not to connect
