Click on Series name for product info on aimtec.com Series AM1DS-(J)NZ 1 Watt | DC-DC Converter FEATURES: * * * * RoHS compliant High efficiency up to 82% Low profile plastic package 7 pin SIP package * * * * Operating temperature -40C to + 105C Continuous short circuit protection Pin compatible with multiple manufacturers Up to 3000VDC Isolation Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) AM1DS-0303S-NZ* AM1DS-0305S-NZ* AM1DS-0505S-NZ AM1DS-0505SJZ* AM1DS-0509S-NZ AM1DS-0512S-NZ AM1DS-0515S-NZ AM1DS-0524S-NZ AM1DS-1205S-NZ AM1DS-1209S-NZ AM1DS-1212S-NZ AM1DS-1215S-NZ AM1DS-1515S-NZ* AM1DS-2403S-NZ* AM1DS-2405S-NZ AM1DS-2412S-NZ AM1DS-2415S-NZ AM1DS-2424S-NZ 3.0-3.6 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 5 5 9 12 15 24 5 9 12 15 15 3.3 5 12 15 24 303 200 200 200 112 83 67 42 200 112 83 67 67 303 200 83 67 42 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 415 388 250 257 250 248 248 248 111 92 92 90 84 56 51 52 52 52 AM1DS-0305SH30-NZ* AM1DS-0505SH30-NZ AM1DS-0509SH30-NZ AM1DS-0512SH30-NZ AM1DS-0515SH30-NZ AM1DS-0524SH30-NZ AM1DS-1205SH30-NZ AM1DS-1209SH30-NZ AM1DS-1212SH30-NZ AM1DS-1215SH30-NZ AM1DS-1224SH30-NZ AM1DS-2405SH30-NZ AM1DS-2409SH30-NZ AM1DS-2412SH30-NZ AM1DS-2415SH30-NZ AM1DS-2424SH30-NZ 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 200 200 112 83 67 42 200 112 83 67 42 200 112 83 67 42 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 388 250 250 248 248 248 111 111 92 92 92 51 51 52 52 52 Input Voltage (V) Output Voltage (V) Output Current max (Ma) Isolation (VDC) 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 5 12 5 5 9 12 15 100 42 100 100 56 42 34 1500 1500 1500 1500 1500 1500 1500 Model Input Current Full Load | No Load (mA) Max. Capacitive Load (F) Efficiency Typ. (%) 25 25 20 10 20 20 20 20 15 15 15 15 10 7 7 7 7 7 220 220 220 2400 220 220 220 220 220 220 220 220 220 220 220 220 220 220 78 79 80 82 80 81 81 81 80 80 81 81 80 79 79 81 81 82 25 20 20 20 20 20 15 15 15 15 15 7 7 7 7 7 220 220 220 220 220 220 220 220 220 220 220 220 200 220 220 220 79 80 80 80 81 81 80 80 81 81 80 79 80 81 81 82 Max. Capacitive Load (F) Efficiency Typ. (%) 100 100 100 1200 100 100 100 78 78 80 82 80 80 81 Models Dual output Model AM1DS-0305D-NZ* AM1DS-0312D-NZ* AM1DS-0505D-NZ AM1DS-0505D-JZ AM1DS-0509D-NZ AM1DS-0512D-NZ AM1DS-0515D-NZ www.aimtec.com F 051e R12.L REV: 05/19/A Tel: +1 514 620 2722 1 of 8 Input Current Full Load | No Load (mA) 274 248 274 286 250 248 248 20 20 20 10 20 20 20 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-(J)NZ 1 Watt | DC-DC Converter AM1DS-0524D-NZ AM1DS-1205D-NZ AM1DS-1212D-NZ AM1DS-1215D-NZ AM1DS-1512D-NZ* AM1DS-1515D-NZ AM1DS-2405D-NZ AM1DS-2412D-NZ AM1DS-2415D-NZ AM1DS-2424D-NZ 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 24 5 12 15 12 15 5 12 15 24 21 100 42 34 42 34 100 42 34 21 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 248 92 92 90 92 84 53 51 51 51 20 15 15 15 15 10 7 7 7 7 100 100 100 100 100 100 100 100 100 100 81 80 81 81 80 80 79 81 82 82 AM1DS-0505DH30-NZ AM1DS-0509DH30-NZ AM1DS-0512DH30-NZ AM1DS-0515DH30-NZ AM1DS-0524DH30-NZ AM1DS-1205DH30-NZ AM1DS-1212DH30-NZ AM1DS-1215DH30-NZ AM1DS-1224DH30-NZ AM1DS-2405DH30-NZ AM1DS-2409DH30-NZ AM1DS-2412DH30-NZ AM1DS-2415DH30-NZ AM1DS-2424DH30-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 24 5 12 15 24 5 9 12 15 24 100 56 42 34 21 100 42 34 21 100 56 42 34 21 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 274 250 248 250 250 248 92 90 90 53 53 51 51 51 20 20 20 20 20 20 15 15 15 7 7 7 7 7 100 100 100 100 100 100 100 100 100 100 100 100 100 100 80 80 80 81 81 81 81 79 79 81 81 81 82 82 With Momentary short circuit protection of 1 second * Reference in the Safety Table NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal Typical 3.3 5 12 15 24 2.97-3.63 or 3.0-3.6 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Capacitor Filter Absolute Maximum Rating 3.3 5 12 15 24 Peak Input Voltage time No Load Input Current AM1DS-0505SJZ input no load current 5 Maximum Units VDC 7 9 18 21 30 1 50 10 VDC s mA mA Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance www.aimtec.com F 051e R12.L REV: 05/19/A Conditions Typical 60 sec > 1000 20 Tel: +1 514 620 2722 2 of 8 Rated Units 1500, 3000 VDC MOhm pF Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-(J)NZ 1 Watt | DC-DC Converter Output Specifications Parameters Conditions Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Typical Maximum 5 Continuous, unless marked with Auto recovery For 1.0% change of Vin 1.2 load 10~100% 10% 0.02 (output 3.3/5/12) 30 20MHz Bandwidth (output 15/24) 60 10 Ripple & Noise Minimum Load Current Units % % of Vin % %/C mV p-p % of Max General Specifications Parameters Switching frequency Switching frequency (for part number with suffix JZ) Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) Dimensions (L x W x H) Conditions Typical 100% load 100% load 100 - 300 270 With derating above 85C Maximum KHz KHz -40 to +105 -55 to +125 100 Not-Required Free air convection 95 Non-conductive black plastic (UL94V-0 rated) 2.3 0.76 x 0.24 x 0.37inches 19.5 x 6.00 x 9.35mm 0.77 x 0.24 x 0.4inches For part numbers with suffix JZ MTBF Maximum soldering temperature Units C C C %/C % RH g 19.65 x 6.00 x 10.16mm >3,500,000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5 mm from case for 10sec 300 C Safety Specifications Parameters Agency approvals cULus Standards Information technology Equipment UL 60950-1 (except the models marked with *) UL 62368 (AM1DS-0505SJZ only) Typical Recommended Circuit Single Vin+ Vo+ Cout Cin Vin- Vo- Dual Vin+ Vo+ Cout Com Cin Cout Vin- www.aimtec.com F 051e R12.L REV: 05/19/A Vo- Tel: +1 514 620 2722 3 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-(J)NZ 1 Watt | DC-DC Converter Vin 3.3 & 5 V 12 V 15 V 24 V Cin 4.7 2.2 2.2 1 Vout 3.3 & 5 V 12 V 15 & 24 V - Cout 10F 2.2 F 1 F - Vout (Dual) 3.3 & 5 V 12 V 15 & 24 V Cout (Dual) 4.7 F 1 F 0.47 F Pin Out Specifications Pin 1500 VDC Single + V Input - V Input - V Output No pin + V Output No pin 1 2 4 5 6 7 3000VDC Dual + V Input - V Input - V Output Common + V Output No pin Single + V Input - V Input No pin - V Output No pin + V Output Dual + V Input - V Input No pin - V Output Common + V Output Dimensions 19.50 (0.76) 6.00 (0.24) PRINTED FACE 9.30 (0.36) 0.30 (0.02) 9.30 (0.36) 4.10 (0.16) 2.54 (0.10) 15.20 (0.60) 0.50 (0.02) 6.00 (0.24) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.25 (0.01) 1.50 (0.06) www.aimtec.com F 051e R12.L REV: 05/19/A Tel: +1 514 620 2722 4 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-(J)NZ 1 Watt | DC-DC Converter Dimensions for part numbers with suffix JZ 19.65 (0.77) 6.00 (0.24) PRINTED FACE 9.66 (0.38) 10.16 (0.40) 4.10 (0.16) 0.50 (0.02) 2.54 (0.10) 15.20 (0.60) 0.50 (0.02) 6.00 (0.24) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.25 (0.01) 1.50 (0.06) EMI Recommended Circuit (Class B) Free Air Convection Vin+ LDM 6.8H + 85 C Output Power (%) 100 80 Vin- Safe Operating Area 60 Vo+ Aimtec DC-DC Converter C1 47F 50V - Load Derating Vo- 40 20 0 - 40 - 20 0 20 40 60 80 85 105 100 Ambient Temperature C www.aimtec.com F 051e R12.L REV: 05/19/A Tel: +1 514 620 2722 5 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-(J)NZ 1 Watt | DC-DC Converter Load Accuracy Tolerance Graph Typical Efficiency Example Charts Eff % AM1DS-0305S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % www.aimtec.com F 051e R12.L REV: 05/19/A Tel: +1 514 620 2722 6 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-(J)NZ 1 Watt | DC-DC Converter Eff % AM1DS-0505S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 90% 100% 90% 100% Loading % Eff % AM1DS-1205S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% Loading % Eff % AM1DS-1515S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% Loading % www.aimtec.com F 051e R12.L REV: 05/19/A Tel: +1 514 620 2722 7 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-(J)NZ 1 Watt | DC-DC Converter Eff % AM1DS-2412S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.L REV: 05/19/A Tel: +1 514 620 2722 8 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only