tycao CHAMP Interconnection System ANP Electronics Product Facts w No prestripping of wire required m Positive electrical contact through redundant contact points w Eliminates time-consuming soldering m Standard 50-position receptacle connector configuration m Terminals constructed of high strength copper alloy with gold over nickel plating in contact area m Utilizes standard CHAMP connector screw lock, bail lock and locking latch hardware m Economical approach to half-tapping and daisy chain applications Product Facts w No prestripping of wire required w Positive electrical contact through redundant contact points w Leads can be dressed to desired configuration m Terminals constructed of high strength copper alloy with gold over nickel plating m Easy plug-in insertion into existing cables Notes: 1. Cable to customer supplied. 2. Acceptable cable diameter range is .380-.400 [9.65-10.16]. Wire Ranges 1.24 AWG [0.20 mmz2] (7 strand) or 26 AWG [0.40 mm] (solid) and 24 AWG [0.51 mn] (solid)B Slot. 2. 26 AWG [0.14 mm2], 27 AWG [0.10 mm2] or 28 AWG [0.09 mm2} (strand)-E Slot. CHAMP IDC Connectors for Special Applications, Multiple Wire Connector and Back-to-Back Connector Assembly (50-Position Only) Multiple Wire Connectors (50-Position Only) The Multiple Wire CHAMP Connector extends the unique technology of the regular CHAMP connector to provide the capability of terminating two conductors into one terminal position. Use of the Multiple Wire connector offers the labor savings of insulation dis- placement technology ver- sus the conventional means of hand soldering the termi- nals. They are available in 80-position receptacle con- figurations with a molded strain relief and the neces- sary hardware for panel mount applications. The connector consists of a molded thermoplastic hous- ing with receptacle con- tacts constructed of high strength copper alloy with gold over nickel plate. Back-to-Back Connector Assembly (50-Position Only) The 50-Position CHAMP Back-to-Back Connector provides the customer with the ability to make an elec- trical connection into exist- ing cable-to-cable and cable-to-panel applications. The male-to-female connec- tor can be utilized as a bridging connector in cen- tral office or PBX Bussing. It also provides a readily accessible interface for test scanning, maintenance or telephone monitoring equipment. This connector utilizes the insulation displacement technology. To terminate the connector, one half of the unstrioped wires are laced through the applicator tool and mass terminated. Reversing the connector allows the mass termination of the remaining connec- tors. For applicator tooling, see page 65. Receptacle AssemblyJ Slot Part Numbers 552827-1 (Gray) and 552827-2 (Black) Multiple Wire Strain Relief! Part Number 552851-2 (Black) i Available for use with 50-position thin flange connector only. : Notes: 1. J Slot for 24 AWG [0.51 mm] solid wire only. (Pink Color Dot) 2. Max. insulation dia. .034 (0.86) swajskg J0]99uU0) UOgqIYy ainjeluIA aul|439}U399 G80 dINVHO For Snap-in Panel Mount Strain Relief, see Panel Mount Connector Accessories on page 95. Application Tooling Termination is accomplished by using the special MI-1 applicator for 26 AWG [0.40 mm] solid wire only, Part Number 2-229378-0 or the CHAMP discrete wire applicator for 26-24 AWG [0.40-0.51] solid wire, Part Number 231593-1. Plug/Receptacle 50-Position, B-Slot Kit Part Number 553257-1 (Cable-to-Cable Application) 117 Catalog 1-1773441-4 Issued 10-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. to change. Dimensions are shown for reference purposes only. Specifications subject USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 dapan: 81-44-844-8013 UK: 44-141-810-8967