(R) DuraType (R) TM650 The TM650 tube and tape supplies are unique to the DuraType 240ST,Tubemarker 600 and TM650 printers and are not suitable for use in other Kroy DuraType printers. Shrink tubing supplies Available in white or yellow heat shrinkable tubing: 3.2mm(1/8"), 4.8mm(3/16"), 6.2mm(1/4") with black printing. Heat shrinkable tubing type: Irradiated polyolefinMIL-LT Shrink temperature: 90C Operating temperature: -55C to 135C Shrink ratio: 3 to 1 Flammability: UL224,VW-1 UL specification: Meets UL-224 Military specification: Meets MIL-I-32053/5, class 1 & 3 TM650 Industrial tape supplies Available in clear, white, red and yellow tape with black printing. Permanent adhesion to variety of substrates (ASTM D3330 on 1/2" strip. Peel strength greater than 600 gram) Stainless Steel Glass ABS Aluminum Epoxy Acrylic Polycarbonate Painted Metal Rigid PVC Temperature resistance Continuous operating temperature range from -40F to 200F (-40C to 93C).It will withstand a minimum of 200 cycles between -40F (-40C) and 200F (93C) on the substrate list above. Printer technical specifications UV fade resistance UV fade resistance greater than 2000 hours in QUV Chamber (Estimated 3-5 year exterior durability) 204mm wide x 242mm deep x 73mm high (8" x 91/2" x 27/8") 1.68 kg (3lbs. 7 oz.) without batteries 4 D-Cell alkaline batteries (not included) Low battery LCD indicator AC power adaptor (included) FCC Part 15 class A computer devices Resident font: Helvetica Regular 8,10,12 and 16pt Printer only part number 2559200 Includes printer and power adaptor Supplies ordering information Tube supplies 3.2mm (1/8") 4.8mm (3/16") 6.2mm (1/4") Black on white: 2404201 2404210 2404220 Black on yellow: 2404202 2404211 2404221 Tape supplies 12.7mm Black on clear: Black on white: Blue on white: White on clear: Black on silver: Black on blue: Black on red: Black on green: Black on yellow: Black on orange: Polyester part no 2464401 2464416 2464417 2464402 2464421 2464431 2464435 2464439 2464443 2464448 Vinyl part no 2559401 2559416 n/a n/a 2559421 2559431 2559435 2559439 2559443 2559448 Chemical resistance test The supply will still be legible after 24 hour immersion in the following chemicals: 150 F Water Alcohol Mixture* ASTM #3 Oil Hydraulic Fluid Motor Oil Alphaflux 200L Jet Fuel Sea Water Skydrol Airplane De-icer (Airplane Hydraulic (Ethylene Glycol) Fluid) *50% Ethanol, 30% Methanol, 20% Water One hour immersion in the following chemicals JP-4 Fuel Trichoroethylene MEK ASTM Reference Fuel B Gasoline Alphaflux Note: For best results, adhere labels to clean, dry surface. If surface requires cleaning, use a solvent to disslove the residue. The data indicated above was gathered after tests results were received from outside test laboratory.To the best of our knowledge, the above is accurate and true. R QUALI T S REG I E LL OYD , SU RANC e-mail info@kroyeurope.com TE AS www.kroyeurope.com France Service Commercial Tel +33 1 48 69 58 18 Germany Kundendienst Tel +49 2464 907142 Y Kroy (Europe) Limited Worton Grange, Reading, Berkshire RG2 0LZ England Tel +44 (0)118 9865 200 Fax +44 (0)118 9865 205 S (R) IS O 9002 UKAS QUALITY MANAGEMENT 001 (c)1994 Kroy (Europe) Ltd. Kroy and DuraType are registered trademarks of Kroy Inc. Subject to product availability. Specifications and pricing may change at any time without notice. Part Number LTKTM650UK