DuraType®
TM650 The TM650 tube and tape supplies are unique to
the DuraType 240ST,Tubemarker 600 and TM650
printers and are not suitable for use in other Kroy
DuraType printers.
Shrink tubing supplies
Available in white or yellow heat shrinkable tubing:
3.2mm(1/8”),4.8mm(3/16”),6.2mm(1/4”) with black
printing.
Heat shrinkable tubing type:
Irradiated polyolefinMIL-LT
Shrink temperature:90ºC
Operating temperature:-55ºC to 135ºC
Shrink ratio:3 to 1
Flammability:UL224,VW-1
UL specification:Meets UL-224
Militar y specification:
Meets MIL-I-32053/5,class 1 & 3
Printer technical specifications
■204mm wide x 242mm deep x 73mm high
(8” x 91/2” x 27/8”)
■1.68 kg (3lbs.7 oz.) without batteries
■4 D-Cell alkaline batteries (not included)
■Low battery LCD indicator
■AC power adaptor (included)
■FCC Part 15 class A computer devices
■Resident font:Helvetica Regular 8,10,12
and 16pt
■Printer only part number 2559200
■Includes printer and power adaptor
Supplies ordering information
Tube supplies Black on white: Black on yellow:
3.2mm (1/8”) 2404201 2404202
4.8mm (3/16”) 2404210 2404211
6.2mm (1/4”) 2404220 2404221
Tape supplies Polyester Vinyl
12.7mm part no part no
Black on clear: 2464401 2559401
Black on white: 2464416 2559416
Blue on white: 2464417 n/a
White on clear: 2464402 n/a
Black on silver: 2464421 2559421
Black on blue: 2464431 2559431
Black on red: 2464435 2559435
Black on green: 2464439 2559439
Black on yellow: 2464443 2559443
Black on orange: 2464448 2559448
TM650 Industrial tape supplies
Available in clear,white, red and yellow tape with
black printing.
Permanent adhesion to
variety of substrates
(ASTM D3330 on 1/2” strip.
Peel strength greater than 600 gram)
■Stainless Steel ■
■Glass ■ ABS
■ Aluminum ■ Epoxy ■ Acrylic
■ Polycarbonate ■ Painted Metal ■ Rigid PVC
Temperature resistance
Continuous operating temperature
range from -40ºF to 200ºF (-40ºC to
93ºC).It will withstand a minimum of
200 cycles between -40ºF (-40ºC) and
200ºF (93ºC) on the substrate list
above.
UV fade resistance
UV fade resistance greater than
2000 hours in QUV Chamber
(Estimated 3-5 year exterior
durability)
Chemical resistance test
The supply will still be legible after
24 hour immersion in the following
chemicals:
■150º F Water ■
■ Alcohol Mixture*■ASTM #3 Oil
■ Hydraulic Fluid ■Motor Oil ■Alphaflux 200L
■ Jet Fuel ■ Sea Water ■Skydrol
■Airplane De-icer (Airplane Hydraulic
(Ethylene Glycol) Fluid)
*50% Ethanol,30% Methanol,20% Water
One hour immersion in the following
chemicals
■JP-4 Fuel ■ASTM Reference Fuel B
■Trichoroethylene ■ Gasoline
■MEK ■Alphaflux
Note:
For best results,adhere labels to clean,dry surface.If surface
requires cleaning,use a solvent to disslove the residue.
The data indicated above was gathered after tests results
were received from outside test laboratory.To the best of
our knowledge,the above is accurate and true.
®
®
©1994 Kroy (Europe) Ltd.Kroy and DuraType are registered trademarks of Kroy Inc.Subject to
product availability.
Specifications and pricing may change at any time without notice.
Kroy (Europe) Limited
Wor ton Grange, Reading, Berkshire
RG2 0LZ England
Tel +44 (0)118 9865 200 Fax +44 (0)118 9865 205
www.kroyeurope.com e-mail info@kroyeurope.com
France
Ser vice Commercial Tel +33 1 48 69 58 18
Germany
Kundendienst Tel +49 2464 907142
Part Number LTKTM650UK
L
L
O
Y
D
,
S
R
E
G
I
S
T
E
R
Q
U
A
L
I
T
Y
A
S
S
U
R
A
N
C
E
I
S
O
9
0
0
2
UKAS
QUALITY
MANAGEMENT
001
