PRODUCT FAMILY DATA SHEET
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS55 REV 11C
Cree® XLamp® CXA1512 LED
PRODUCT DESCRIPTION
The XLamp® CXA1512 LED array
expands Cree’s family of high‑ux,
multi‑die arrays in a smaller, easy‑to‑use
platform. With XLamp LED lighting‑class
reliability, the CXA1512’s small,
uniform emitting surface enables both
directional and non‑directional lighting
applications including lamp retrot and
luminaire designs. Available in 2‑step,
3‑step and 4‑step color consistency,
and featuring a 9‑mm optical source,
the CXA1512 brings new levels of ux
and efcacy to this form factor.
The CX Family LED Design Guide
provides basic information on the
requirements to use the CXA1512 LED
successfully in luminaire designs.
FEATURES
• Available in 4‑step, 3‑step and 2‑step
EasyWhite® bins at 2700K, 3000K,
3500K, 4000K & 5000K CCT and
4‑step EasyWhite bins at 5700K &
6500K CCT
• Available in ANSI white bins at
4000K, 5000K, 5700K & 6500K
CCT
• Available in 70‑, 80‑, 90‑ and
93‑minimum CRI options
• Forward voltage options: 18‑V class
& 36‑V class
• 85°C binning and characterization
• Maximum drive current: 1200mA
(18V), 600mA (36V)
• 115° viewing angle, uniform
chromaticity profile
• Top‑side solder connections
• Thermocouple attach point
• NEMA SSL‑3 2011 standard ux bins
• RoHS and REACh compliant
• UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ............................................2
Operating Limits ..........................................3
Flux Characteristics, EasyWhite® Order
Codes and Bins ‑ 18V .................................4
Flux Characteristics, ANSI White Order
Codes and Bins ‑ 18V .................................7
Flux Characteristics, EasyWhite® Order
Codes and Bins ‑ 36V .................................8
Flux Characteristics, ANSI White Order
Codes and Bins ‑ 36V .............................. 11
Relative Spectral Power Distribution ...... 12
Electrical Characteristics ......................... 13
Relative Luminous Flux ............................ 14
Typical Spatial Distribution ...................... 16
Performance Groups ‑ Brightness .......... 16
Performance Groups ‑ Chromaticity ....... 17
Cree EasyWhite® Bins Plotted on the
1931 CIE Color Space .............................. 20
Cree ANSI White Bins Plotted on the
1931 CIE Color Space .............................. 20
Bin and Order Code Formats ................... 21
Mechanical Dimensions .......................... 21
Thermal Design ........................................ 22
Notes ........................................................ 24
Packaging ................................................. 25
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLAMP® CXA1512 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Viewing angle (FWHM) degrees 115
ESD withstand voltage (HBM per Mil‑Std‑883D) V8000
DC forward current (18V) mA 1200*
DC forward current (36V) mA 600*
Reverse current (18V, 36V) mA 0.1
Forward voltage (18V, @ 700mA, 85°C) V18.2
Forward voltage (18V, @ 700mA, 25°C) V 21
Forward voltage (36V, @ 350mA, 85°C) V36.4
Forward voltage (36V, @ 350mA, 25°C) V42
* Refer to the Operating Limits section.
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLAMP® CXA1512 LED
OPERATING LIMITS
The maximum current rating of the CXA1512 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under
steady‑state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface
material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section
on page 21 for the location of the Tc measurement point.
Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a
maximum LES temperature of 135°C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 22 for more
information on LES temperature measurement.
CXA1512 - 18 V
0
200
400
600
800
1000
1200
1400
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
18 V
CXA1512 - 36 V
0
100
200
300
400
500
600
700
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
36 V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C)
The following table provides order codes for XLamp CXA1512 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 21).
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 4-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
6500 K
70 75
M2 1380 1563
65F
CXA1512‑0000‑
000F00M265F
M4 1485 1682 CXA1512‑0000‑
000F00M465F
N2 1590 1710 CXA1512‑0000‑
000F00N265F
80 ---
M2 1380 1563
65F
CXA1512‑0000‑
000F0HM265F
M4 1485 1685 CXA1512‑0000‑
000F0HM465F
N2 1590 1710 CXA1512‑0000‑
000F0HN265F
5700 K
70 75
M2 1380 1563
57F
CXA1512‑0000‑
000F00M257F
M4 1485 1682 CXA1512‑0000‑
000F00M457F
N2 1590 1710 CXA1512‑0000‑
000F00N257F
80 ---
M2 1380 1563
57F
CXA1512‑0000‑
000F0HM257F
M4 1485 1682 CXA1512‑0000‑
000F0HM457F
N2 1590 1710 CXA1512‑0000‑
000F0HN257F
5000K
70 75
M2 1380 1563
50H
CXA1512‑0000‑
000F00M250H
50F
CXA1512‑0000‑
000F00M250F
M4 1485 1682 CXA1512‑0000‑
000F00M450H
CXA1512‑0000‑
000F00M450F
N2 1590 1710 CXA1512‑0000‑
000F00N250H
CXA1512‑0000‑
000F00N250F
80 ---
M2 1380 1563
50H
CXA1512‑0000‑
000F0HM250H
50G 50H
CXA1512‑0000‑
000F0HM250F
M4 1485 1682 CXA1512‑0000‑
000F0HM450H
CXA1512‑0000‑
000F0HM450G
CXA1512‑0000‑
000F0HM450F
N2 1590 1710 CXA1512‑0000‑
000F0HN250H
CXA1512‑0000‑
000F0HN250G
CXA1512‑0000‑
000F0HN250F
90 95
J4 1120 1269
50H
CXA1512‑0000‑
000F0UJ450H
50G
CXA1512‑0000‑
000F0UJ450G
50F
CXA1512‑0000‑
000F0UJ450F
K2 1200 1359 CXA1512‑0000‑
000F0UK250H
CXA1512‑0000‑
000F0UK250G
CXA1512‑0000‑
000F0UK250F
K4 1290 1461 CXA1512‑0000‑
000F0UK450H
CXA1512‑0000‑
000F0UK450G
CXA1512‑0000‑
000F0UK450F
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 4-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
4000K
70 75
M2 1380 1563
40H
CXA1512‑0000‑
000F00M240H
40F
CXA1512‑0000‑
000F00M240F
M4 1485 1682 CXA1512‑0000‑
000F00M440H
CXA1512‑0000‑
000F00M440F
N2 1590 1710 CXA1512‑0000‑
000F00N240H
CXA1512‑0000‑
000F00N240F
80 ---
K4 1290 1461
40H
CXA1512‑0000‑
000F0HK440H
40G 40F
CXA1512‑0000‑
000F0HK440F
M2 1380 1563 CXA1512‑0000‑
000F0HM240H
CXA1512‑0000‑
000F0HM240G
CXA1512‑0000‑
000F0HM240F
M4 1485 1682 CXA1512‑0000‑
000F0HM440H
CXA1512‑0000‑
000F0HM440G
CXA1512‑0000‑
000F0HM440F
90 95
J2 1040 1178
40H
CXA1512‑0000‑
000F0UJ240H
40G
CXA1512‑0000‑
000F0UJ240G
40F
CXA1512‑0000‑
000F0UJ240F
J4 1120 1269 CXA1512‑0000‑
000F0UJ440H
CXA1512‑0000‑
000F0UJ440G
CXA1512‑0000‑
000F0UJ440F
K2 1200 1359 CXA1512‑0000‑
000F0UK240H
CXA1512‑0000‑
000F0UK240G
CXA1512‑0000‑
000F0UK240F
3500K
80 ---
K4 1290 1461
35H
CXA1512‑0000‑
000F00K435H
35G 35F
CXA1512‑0000‑
000F00K435F
M2 1380 1563 CXA1512‑0000‑
000F00M235H
CXA1512‑0000‑
000F00M235G
CXA1512‑0000‑
000F00M235F
M4 1485 1682 CXA1512‑0000‑
000F00M435H
CXA1512‑0000‑
000F00M435G
CXA1512‑0000‑
000F00M435F
93 95
H4 970 1099
35H
CXA1512‑0000‑
000F0YH435H
35G
CXA1512‑0000‑
000F0YH435G
35F
CXA1512‑0000‑
000F0YH435F
J2 1040 1178 CXA1512‑0000‑
000F0YJ235H
CXA1512‑0000‑
000F0YJ235G
CXA1512‑0000‑
000F0YJ235F
J4 1120 1269 CXA1512‑0000‑
000F0YJ435H
CXA1512‑0000‑
000F0YJ435G
CXA1512‑0000‑
000F0YJ435F
3000K
80 ---
K4 1290 1461
30H
CXA1512‑0000‑
000F00K430H
30G 30F
CXA1512‑0000‑
000F00K430F
M2 1380 1563 CXA1512‑0000‑
000F00M230H
CXA1512‑0000‑
000F00M230G
CXA1512‑0000‑
000F00M230F
M4 1485 1682 CXA1512‑0000‑
000F00M430H
CXA1512‑0000‑
000F00M430G
CXA1512‑0000‑
000F00M430F
93 95
H4 970 1099
30H
CXA1512‑0000‑
000F0YH430H
30G 30F
CXA1512‑0000‑
000F0YH430F
J2 1040 1178 CXA1512‑0000‑
000F0YJ230H
CXA1512‑0000‑
000F0YJ230G
CXA1512‑0000‑
000F0YJ230F
J4 1120 1269 CXA1512‑0000‑
000F0YJ430H
CXA1512‑0000‑
000F0YJ430G
CXA1512‑0000‑
000F0YJ430F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C) - CONTINUED
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 4-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
2700K
80 ---
K2 1200 1359
27H
CXA1512‑0000‑
000F00K227H
27G 27F
CXA1512‑0000‑
000F00K227F
K4 1290 1461 CXA1512‑0000‑
000F00K427H
CXA1512‑0000‑
000F00K427G
CXA1512‑0000‑
000F00K427F
M2 1380 1563 CXA1512‑0000‑
000F00M227H
CXA1512‑0000‑
000F00M227G
CXA1512‑0000‑
000F00M227F
93 95
H2 900 1019
27H
CXA1512‑0000‑
000F0YH227H
27G 27F
CXA1512‑0000‑
000F0YH227F
H4 970 1099 CXA1512‑0000‑
000F0YH427H
CXA1512‑0000‑
000F0YH427G
CXA1512‑0000‑
000F0YH427F
J2 1040 1178 CXA1512‑0000‑
000F0YJ227H
CXA1512‑0000‑
000F0YJ227G
CXA1512‑0000‑
000F0YJ227F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C) - CONTINUED
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C)
The following table provides order codes for XLamp CXA1512 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 21).
Nominal
CCT
CRI Minimum Luminous Flux
Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C*
6500 K
70 75
M2 1380 1563
1A0, 1B0, 1C0, 1D0, 65F
CXA1512‑0000‑000F00M20E1
M4 1485 1685 CXA1512‑0000‑000F00M40E1
N2 1590 1710 CXA1512‑0000‑000F00N20E1
80 ---
M2 1380 1563
1A0, 1B0, 1C0, 1D0, 65F
CXA1512‑0000‑000F0HM20E1
M4 1485 1685 CXA1512‑0000‑000F0HM40E1
N2 1590 1710 CXA1512‑0000‑000F0HN20E1
5700 K
70 75
M2 1380 1563
2A0, 2B0, 2C0, 2D0, 57F
CXA1512‑0000‑000F00M20E2
M4 1485 1685 CXA1512‑0000‑000F00M40E2
N2 1590 1710 CXA1512‑0000‑000F00N20E2
80 ---
M2 1380 1563
2A0, 2B0, 2C0, 2D0, 57F
CXA1512‑0000‑000F0HM20E2
M4 1485 1685 CXA1512‑0000‑000F0HM40E2
N2 1590 1710 CXA1512‑0000‑000F0HN20E2
5000K
70 75
M2 1380 1563
3A0, 3B0, 3C0, 3D0, 50F
CXA1512‑0000‑000F00M20E3
M4 1485 1685 CXA1512‑0000‑000F00M40E3
N2 1590 1710 CXA1512‑0000‑000F00N20E3
80 ---
M2 1380 1563
3A0, 3B0, 3C0, 3D0, 50F
CXA1512‑0000‑000F0HM20E3
M4 1485 1685 CXA1512‑0000‑000F0HM40E3
N2 1590 1710 CXA1512‑0000‑000F0HN20E3
4000K 70 75
M2 1380 1563
5A0, 5B0, 5C0, 5D0, 40F
CXA1512‑0000‑000F00M40E5
M4 1485 1685 CXA1512‑0000‑000F00M40E5
N2 1590 1710 CXA1512‑0000‑000F00N20E5
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C)
The following table provides order codes for XLamp CXA1512 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 21).
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 4-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
6500 K
70 75
M2 1380 1563
65F
CXA1512‑0000‑
000N00M265F
M4 1485 1682 CXA1512‑0000‑
000N00M465F
N2 1590 1710 CXA1512‑0000‑
000N00N265F
80 ---
M2 1380 1563
65F
CXA1512‑0000‑
000N0HM265F
M4 1485 1685 CXA1512‑0000‑
000N0HM465F
N2 1590 1710 CXA1512‑0000‑
000N0HN265F
5700 K
70 75
M2 1380 1563
57F
CXA1512‑0000‑
000N00M257F
M4 1485 1682 CXA1512‑0000‑
000N00M457F
N2 1590 1710 CXA1512‑0000‑
000N00N257F
80 ---
M2 1380 1563
57F
CXA1512‑0000‑
000N0HM257F
M4 1485 1682 CXA1512‑0000‑
000N0HM457F
N2 1590 1710 CXA1512‑0000‑
000N0HN257F
5000K
70 75
M2 1380 1563
50H
CXA1512‑0000‑
000N00M250H
50F
CXA1512‑0000‑
000N00M250F
M4 1485 1682 CXA1512‑0000‑
000N00M450H
CXA1512‑0000‑
000N00M450F
N2 1590 1710 CXA1512‑0000‑
000N00N250H
CXA1512‑0000‑
000N00N250F
80 ---
M2 1380 1563
50H
CXA1512‑0000‑
000N0HM250H
50G 50H
CXA1512‑0000‑
000N0HM250F
M4 1485 1682 CXA1512‑0000‑
000N0HM450H
CXA1512‑0000‑
000N0HM450G
CXA1512‑0000‑
000N0HM450F
N2 1590 1710 CXA1512‑0000‑
000N0HN250H
CXA1512‑0000‑
000N0HN250G
CXA1512‑0000‑
000N0HN250F
90 95
J4 1120 1269
50H
CXA1512‑0000‑
000N0UJ450H
50G
CXA1512‑0000‑
000N0UJ450G
50F
CXA1512‑0000‑
000N0UJ450F
K2 1200 1359 CXA1512‑0000‑
000N0UK250H
CXA1512‑0000‑
000N0UK250G
CXA1512‑0000‑
000N0UK250F
K4 1290 1461 CXA1512‑0000‑
000N0UK450H
CXA1512‑0000‑
000N0UK450G
CXA1512‑0000‑
000N0UK450F
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 4-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
4000K
70 75
M2 1380 1563
40H
CXA1512‑0000‑
000N00M240H
40F
CXA1512‑0000‑
000N00M240F
M4 1485 1682 CXA1512‑0000‑
000N00M440H
CXA1512‑0000‑
000N00M440F
N2 1590 1710 CXA1512‑0000‑
000N00N240H
CXA1512‑0000‑
000N00N240F
80 ---
K4 1290 1461
40H
CXA1512‑0000‑
000N0HK440H
40G 40F
CXA1512‑0000‑
000N0HK440F
M2 1380 1563 CXA1512‑0000‑
000N0HM240H
CXA1512‑0000‑
000N0HM240G
CXA1512‑0000‑
000N0HM240F
M4 1485 1682 CXA1512‑0000‑
000N0HM440H
CXA1512‑0000‑
000N0HM440G
CXA1512‑0000‑
000N0HM440F
90 95
J2 1040 1178
40H
CXA1512‑0000‑
000N0UJ240H
40G
CXA1512‑0000‑
000N0UJ240G
40F
CXA1512‑0000‑
000N0UJ240F
J4 1120 1269 CXA1512‑0000‑
000N0UJ440H
CXA1512‑0000‑
000N0UJ440G
CXA1512‑0000‑
000N0UJ440F
K2 1200 1359 CXA1512‑0000‑
000N0UK240H
CXA1512‑0000‑
000N0UK240G
CXA1512‑0000‑
000N0UK240F
3500K
80 ---
K4 1290 1461
35H
CXA1512‑0000‑
000N00K435H
35G 35F
CXA1512‑0000‑
000N00K435F
M2 1380 1563 CXA1512‑0000‑
000N00M235H
CXA1512‑0000‑
000N00M235G
CXA1512‑0000‑
000N00M235F
M4 1485 1682 CXA1512‑0000‑
000N00M435H
CXA1512‑0000‑
000N00M435G
CXA1512‑0000‑
000N00M435F
93 95
H4 970 1099
35H
CXA1512‑0000‑
000N0YH435H
35G
CXA1512‑0000‑
000N0YH435G
35F
CXA1512‑0000‑
000N0YH435F
J2 1040 1178 CXA1512‑0000‑
000N0YJ235H
CXA1512‑0000‑
000N0YJ235G
CXA1512‑0000‑
000N0YJ235F
J4 1120 1269 CXA1512‑0000‑
000N0YJ435H
CXA1512‑0000‑
000N0YJ435G
CXA1512‑0000‑
000N0YJ435F
3000K
80 ---
K4 1290 1461
30H
CXA1512‑0000‑
000N00K430H
30G 30F
CXA1512‑0000‑
000N00K430F
M2 1380 1563 CXA1512‑0000‑
000N00M230H
CXA1512‑0000‑
000N00M230G
CXA1512‑0000‑
000N00M230F
M4 1485 1682 CXA1512‑0000‑
000N00M430H
CXA1512‑0000‑
000N00M430G
CXA1512‑0000‑
000N00M430F
93 95
H4 970 1099
30H
CXA1512‑0000‑
000N0YH430H
30G 30F
CXA1512‑0000‑
000N0YH430F
J2 1040 1178 CXA1512‑0000‑
000N0YJ230H
CXA1512‑0000‑
000N0YJ230G
CXA1512‑0000‑
000N0YJ230F
J4 1120 1269 CXA1512‑0000‑
000N0YJ430H
CXA1512‑0000‑
000N0YJ430G
CXA1512‑0000‑
000N0YJ430F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C) - CONTINUED
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 4-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
2700K
80 ---
K2 1200 1359
27H
CXA1512‑0000‑
000N00K227H
27G 27F
CXA1512‑0000‑
000N00K227F
K4 1290 1461 CXA1512‑0000‑
000N00K427H
CXA1512‑0000‑
000N00K427G
CXA1512‑0000‑
000N00K427F
M2 1380 1563 CXA1512‑0000‑
000N00M227H
CXA1512‑0000‑
000N00M227G
CXA1512‑0000‑
000N00M227F
93 95
H2 900 1019
27H
CXA1512‑0000‑
000N0YH227H
27G 27F
CXA1512‑0000‑
000N0YH227F
H4 970 1099 CXA1512‑0000‑
000N0YH427H
CXA1512‑0000‑
000N0YH427G
CXA1512‑0000‑
000N0YH427F
J2 1040 1178 CXA1512‑0000‑
000N0YJ227H
CXA1512‑0000‑
000N0YJ227G
CXA1512‑0000‑
000N0YJ227F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C) - CONTINUED
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLAMP® CXA1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 24).
• Cree XLamp CXA1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C)
The following table provides order codes for XLamp CXA1512 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 21).
Nominal
CCT
CRI Minimum Luminous Flux
Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C*
6500 K
70 75
M2 1380 1563
1A0, 1B0, 1C0, 1D0, 65F
CXA1512‑0000‑000N00M20E1
M4 1485 1685 CXA1512‑0000‑000N00M40E1
N2 1590 1710 CXA1512‑0000‑000N00N20E1
80 ---
M2 1380 1563
1A0, 1B0, 1C0, 1D0, 65F
CXA1512‑0000‑000N0HM20E1
M4 1485 1685 CXA1512‑0000‑000N0HM40E1
N2 1590 1710 CXA1512‑0000‑000N0HN20E1
5700 K
70 75
M2 1380 1563
2A0, 2B0, 2C0, 2D0, 57F
CXA1512‑0000‑000N00M20E2
M4 1485 1685 CXA1512‑0000‑000N00M40E2
N2 1590 1710 CXA1512‑0000‑000N00N20E2
80 ---
M2 1380 1563
2A0, 2B0, 2C0, 2D0, 57F
CXA1512‑0000‑000N0HM20E2
M4 1485 1685 CXA1512‑0000‑000N0HM40E2
N2 1590 1710 CXA1512‑0000‑000N0HN20E2
5000K
70 75
M2 1380 1563
3A0, 3B0, 3C0, 3D0, 50F
CXA1512‑0000‑000N00M20E3
M4 1485 1685 CXA1512‑0000‑000N00M40E3
N2 1590 1710 CXA1512‑0000‑000N00N20E3
80 ---
M2 1380 1563
3A0, 3B0, 3C0, 3D0, 50F
CXA1512‑0000‑000N0HM20E3
M4 1485 1685 CXA1512‑0000‑000N0HM40E3
N2 1590 1710 CXA1512‑0000‑000N0HN20E3
4000K 70 75
M2 1380 1563
5A0, 5B0, 5C0, 5D0, 40F
CXA1512‑0000‑000N00M40E5
M4 1485 1685 CXA1512‑0000‑000N00M40E5
N2 1590 1710 CXA1512‑0000‑000N00N20E5
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLAMP® CXA1512 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
The following graph is the result of a series of pulsed measurements at 700mA for the 18‑V CXA1512 LED and 350mA for the 36‑V
CXA1512 LED and TJ = 85°C.
Relative Spectral Power Distribution
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
5000 K, 70 CRI
4000 K, 70 CRI
3000 K, 80 CRI
3000 K, 93 CRI
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLAMP® CXA1512 LED
ELECTRICAL CHARACTERISTICS
The following graphs are the result of a series of steady‑state measurements.
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
400 500 600 700 800 900 1000 1100 1200
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
34
35
36
37
38
39
40
41
200 250 300 350 400 450 500 550 600
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLAMP® CXA1512 LED
RELATIVE LUMINOUS FLUX
The relative luminous ux values provided below are the ratio of:
• Measurements of CXA1512 at steady‑state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 700mA at TJ = 85°C for the 18‑V CXA1512 LED.
Using the 18‑V CXA1512 LED as an example, at steady‑state operation of Tc = 105°C, IF = 600mA, the relative luminous ux ratio is 80%
in the chart below. A CXA1512 LED that measures 1200lm during binning will deliver 960lm (1200 * 0.8) at steady‑state operation of
Tc=105°C, IF = 600mA.
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
400 500 600 700 800 900 1000 1100 1200
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLAMP® CXA1512 LED
RELATIVE LUMINOUS FLUX - CONTINUED
The relative luminous ux values provided below are the ratio of:
• Measurements of CXA1512 at steady‑state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 350mA at TJ = 85°C for the 36‑V CXA1512 LED.
Using the 36‑V CXA1512 LED as an example, at steady‑state operation of Tc = 105°C, IF = 300mA, the relative luminous ux ratio is 80%
in the chart below. A CXA1512 LED that measures 1200lm during binning will deliver 960lm (1200 * 0.8) at steady‑state operation of
Tc=105°C, IF = 300mA.
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200 250 300 350 400 450 500 550 600
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLAMP® CXA1512 LED
TYPICAL SPATIAL DISTRIBUTION
PERFORMANCE GROUPS - BRIGHTNESS (18V, IF = 700mA; 36V, IF = 350mA, TJ = 85°C)
XLamp CXA1512 LEDs are tested for luminous ux and placed into one of the following bins.
Group Code Minimum Luminous Flux Maximum Luminous Flux
H2 900 970
H4 970 1040
J2 1040 1120
J4 1120 1200
K2 1200 1290
K4 1290 1380
M2 1380 1485
M4 1485 1590
N2 1590 1710
N4 1710 1830
P2 1830 1965
Far Field
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLAMP® CXA1512 LED
PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C)
XLamp CXA1512 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Code CCT x y
50H 5000 K
0.3429 0.3507
0.3434 0.3571
0.3475 0.3604
0.3469 0.3539
40H 4000 K
0.3784 0.3741
0.3804 0.3818
0.3867 0.3857
0.3844 0.3778
35H 3500 K
0.4030 0.3857
0.4061 0.3941
0.4132 0.3976
0.4099 0.3890
30H 3000 K
0.4291 0.3973
0.4333 0.4062
0.4395 0.4084
0.4351 0.3994
27H 2700 K
0.4528 0.4046
0.4578 0.4138
0.4638 0.4152
0.4586 0.4060
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
50G 5000K 0.3447 0.3553 0.00840 0.00312 65.0
40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7
35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0
30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2
27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLAMP® CXA1512 LED
PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C) - CONTINUED
EasyWhite Color Temperatures – 4-Step
Code CCT x y
65F 6500K
0.3097 0.3196
0.3079 0.3297
0.3164 0.3382
0.3176 0.3275
57F 5700K
0.3253 0.3325
0.3249 0.3439
0.3331 0.3514
0.3330 0.3393
50F 5000K
0.3407 0.3459
0.3415 0.3586
0.3499 0.3654
0.3484 0.3521
40F 4000K
0.3744 0.3685
0.3782 0.3837
0.3912 0.3917
0.3863 0.3758
35F 3500K
0.3981 0.3800
0.4040 0.3966
0.4186 0.4037
0.4116 0.3865
30F 3000K
0.4242 0.3919
0.4322 0.4096
0.4449 0.4141
0.4359 0.3960
27F 2700K
0.4475 0.3994
0.4573 0.4178
0.4695 0.4207
0.4589 0.4021
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLAMP® CXA1512 LED
PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C) - CONTINUED
ANSI White Bins
Code CCT Bin
Code x y
0E1 6500 K
1A0
0.3048 0.3207
0.3130 0.3290
0.3144 0.3186
0.3068 0.3113
1B0
0.3028 0.3304
0.3115 0.3391
0.3130 0.3290
0.3048 0.3207
1C0
0.3115 0.3391
0.3205 0.3481
0.3213 0.3373
0.3130 0.3290
1D0
0.3130 0.3290
0.3213 0.3373
0.3221 0.3261
0.3144 0.3186
ANSI White Bins
Code CCT Bin
Code x y
0E2 5700 K
2A0
0.3215 0.3350
0.3290 0.3417
0.3290 0.3300
0.3222 0.3243
2B0
0.3207 0.3462
0.3290 0.3538
0.3290 0.3417
0.3215 0.3350
2C0
0.3290 0.3538
0.3376 0.3616
0.3371 0.3490
0.3290 0.3417
2D0
0.3290 0.3417
0.3371 0.3490
0.3366 0.3369
0.3290 0.3300
ANSI White Bins
Code CCT Bin
Code x y
0E5 4000 K
5A0
.3670 .3578
.3702 .3722
.3825 .3798
.3783 .3646
5B0
.3702 .3722
.3736 .3874
.3869 .3958
.3825 .3798
5C0
.3825 .3798
.3869 .3958
.4006 .4044
.3950 .3875
5D0
.3783 .3646
.3825 .3798
.3950 .3875
.3898 .3716
ANSI White Bins
Code CCT Bin
Code x y
0E3 5000 K
3A0
.3371 .3490
.3451 .3554
.3440 .3427
.3366 .3369
3B0
.3376 .3616
.3463 .3687
.3451 .3554
.3371 .3490
3C0
.3463 .3687
.3551 .3760
.3533 .3620
.3451 .3554
3D0
.3451 .3554
.3533 .3620
.3515 .3487
.3440 .3427
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLAMP® CXA1512 LED
CREE EASYWHITE® BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
CREE ANSI WHITE BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
6500 K
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 4-Step
EasyWhite 3-Step
EasyWhite 2-Step
4000 K
4500 K
5000 K
5700 K
6500 K
3A
3B
3C
3D
5A
5B
5C
5D
1A
1B
1C
1D
2A
2B
2C
2D
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
CCy
CCx
ANSI C78.377 Quadrangle
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLAMP® CXA1512 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes are congured as follows:
Order Code Bin Code
SSSSSCC-HHHH-HHHGGRNNNNN
Series = CXA15
Internal code
CRI Specification
0 = Standard CRI
H = 80 CRI minimum
U = 90 CRI minimum
Y = 93 CRI minimum
Kit code
Vf class
F0 = 18-V class
N0 = 36-V class
Performance class
SSSSSCC-WWW
-FF-GGR-AAAAA
Series = CXA15
Chromaticity bin
Vf class
F0 = 18-V class
N0 = 36-V class
Internal code
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Y = 93 CRI minimum
Flux bin
Performance class
MECHANICAL DIMENSIONS
Dimensions are in mm.
Tolerances unless otherwise
specied: ±.13
x° ± 1°
Meaning of 1512X
1512F = 18‑V CXA1512
1512N = 36‑V CXA1512
1512X
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLAMP® CXA1512 LED
THERMAL DESIGN
The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction
temperatures (TJ). Cree has intentionally removed junction‑temperature‑based operating limits and replaced the commonplace maximum
TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to
ensure that the CXA LED is being operated within its designed limits. LES temperature measurement provides additional verication of
good thermal design. Please refer to page 3 for the Operating Limit specications.
There is no need to calculate for TJ inside the package, as the thermal management design process, specically from TSP to ambient
(Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to
the Thermal Management application note. For CXA soldering recommendations and more information on thermal interface materials
(TIM), LES temperature measurement, and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling
document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXA LEDs successfully
in luminaire designs.
To keep the CXA1512 LED at or below the maximum rated Tc, the case to ambient temperature
thermal resistance (R_c‑a) must be at or below the maximum R_c‑a value shown on the following
graphs, depending on the operating environment. The y‑axis in the graphs is a base 10 logarithmic
scale.
As the gure at right shows, the R_c‑a value is the sum of the thermal resistance of the TIM (R_tim)
plus the thermal resistance of the heat sink (R_hs).
R_j-c
Tc
R_tim
R_hs
Ta
R_j-c
Tc
R_c-a
Ta
CXA1512 - 18 V
0.01
0.10
1.00
10.00
100.00
400 500 600 700 800 900 1000 1100 1200
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
18 V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLAMP® CXA1512 LED
THERMAL DESIGN - CONTINUED
CXA1512 - 36 V
0.01
0.10
1.00
10.00
100.00
200 250 300 350 400 450 500 550 600
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
36 V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLAMP® CXA1512 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre-Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specic LM‑80 data sets available for this LED, refer to the public LM‑80 results document.
Please read the Long‑Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up‑to‑date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLAMP® CXA1512 LED
PACKAGING
Cree CXA1512 LEDs are packaged in trays of 20. Five trays are sealed in an anti‑static bag and placed inside a carton, for a total of 100
LEDs per carton. Each carton contains 100 LEDs from the same performance bin.
Dimensions are in inches.
Tolerances: ±.13
x° ±1°
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER
PATENT LABEL IS LOCATED
ON UNDERSIDE OF CARTON
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER