TW series Hall effect thumbwheels Distinctive features and specifications 5 million cycles Hall effect technology Proportional control Self-centering single axis design Redundant outputs available Choice of wheel colors: black, red, blue, or gray ELECTRICAL MECHANICAL (FOR X, Y AXIS) * * * * Break Out Force: 0.7N (0.15lbf) Mechanical Angle of Movement: 80 (40 from center) Expected Life: 5 million cycles Lever Action (Centering): Spring centering ENVIRONMENTAL * * * * * * Operating Temperature: -40C to +85C (-40F to +185F) Storage Temperature: -40C to +85C (-40F to +185F) Sealing: IP67* EMC Immunity Level: EN61000-4-3 (extended) EMC Emissions Level: EN61000-6-3:2001 ESD: EN61000-4-2 (extended) * * * * * * * * Sensor: Hall effect Resolution: 1.22mV Supply Voltage Range: 5V .250V Reverse Polarity Max: -10V Overvoltage Max: 20V Output Impedance: 2 Return to Center Voltage (No Load): 200mV Error Signal: 1.0% NOTES: * Electronics sealed to IP67. Exact specifications are subject to configuration. All values are nominal. TW Output Options SERIES Model 0 1 With Tab Without Tab 1 2 3 4 5 6 7 8 9 0V to 5V 0.5V to 4.5V 1V to 4V 0V to 5V - Sensor 1 0V to 5V - Sensor 2 0.5V to 4.5V - Sensor 0.5V to 4.5V - Sensor 1V to 4V - Sensor 1 1V to 4V - Sensor 2 0V to 5V - Sensor 1 5V to 0V - Sensor 2 0.5V to 4.5V - Sensor 4.5V to 0.5V - Sensor 1V to 4V - Sensor 1 4V to 1V - Sensor 2 Spring Tension 1 Actuator Color 1 2 1 2 BLK RED BLU GRY Black Red Blue Gray Termination 1 2 3 4 2.54mm (.100") Pitch Male Header 22AWG 41cm PTFE 28AWG 41cm PTFE 2.54mm (.100") Pitch Male Header with Mating Harness 25cm NOTES: Mounting accessories: steel spring retainer, insertion tool, and sealing gasket. Note: The company reserves the right to change specifications without notice. APEM Standard www.apem.com TW series Hall effect thumbwheels Overview High Voltage Low Voltage 16.10 (0.64) 40.40 (1.59) 35.56 (1.41) 24.30 (0.96) 46.90 (1.85) 18.03 (0.71) 15.90 (0.63) 36.20 (1.43) 38.80 (1.53) MOUNTING OPTIONS STEEL SPRING RETAINER* 16.3 (0.64) 20.60 (0.811) A A 36.6 (1.44) R1.5 Max Radius (0.059) 43.18 (1.700) * - used for installation NOTE: 1. Dimensions are in mm/(inch). A-A INSTALLATION EXAMPLE APPLICATION Sealing gasket Panel Spring retainer Note: The company reserves the right to change specifications without notice. www.apem.com APEM TW series Hall effect thumbwheels Overview VOLTAGE OUTPUT OPTIONS OPTION 1 4.5 4.0 4.0 3.0 2.5 2.0 1.5 1.0 3.0 2.5 2.0 1.5 1.0 0.5 0 0 TRAVEL () MAX OPTION 4 3.5 3.0 2.5 2.0 1.5 1.0 0.5 MIN TRAVEL () 0 MAX OPTION 5 5.0 4.5 4.0 4.0 4.0 3.0 2.5 2.0 1.5 1.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0 0 MIN TRAVEL () MAX OPTION 7 5.0 OUTPUT VOLTAGE (V) 4.5 3.5 3.0 2.5 2.0 1.5 1.0 MIN TRAVEL () 0 MAX OPTION 8 4.0 1.5 1.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0 0 MIN TRAVEL () MAX OUTPUT VOLTAGE (V) 4.0 OUTPUT VOLTAGE (V) 4.5 4.0 2.0 MIN TRAVEL () MAX OPTION 9 5.0 4.5 2.5 MAX 0.5 5.0 3.0 TRAVEL () OPTION 6 3.5 4.5 3.5 MIN 5.0 4.5 OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) 3.5 0.5 MIN OUTPUT VOLTAGE (V) 4.5 4.0 3.5 OPTION 3 5.0 4.5 5.0 OUTPUT VOLTAGE (V) OPTION 2 5.0 OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) 5.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 MIN TRAVEL () MAX 0 MIN TRAVEL () MAX Output 1 Output 2 CONNECTOR TERMINATION OPTION CONNECTOR PINOUT Low Voltage High Voltage The TW Series Thumbwheel may be specified with a TE Connectivity 2.54mm pitch male header. When selected from the "Option Selection" guide, both single and dual output configurations feature a four position TE 3-647166-4 connector. OPTIONAL MATING HARNESS 1234 The TW Series is available with an optional mating harness. The four function harness is part number 505-498. Ground Output beta Output alpha Power DEFAULT WIRE COLOR CODE COLOR RED BLACK BLUE BLUE/WHITE FUNCTION +5V Ground Output alpha Output beta Wire type: Connector: 22AWG 25cm PTFE Molex 0050579504 CIRCUIT WIRE COLOR PIN PIN PIN PIN BLACK BLUE/WHITE BLUE RED AWG 22 1 2 3 4 Note: The company reserves the right to change specifications without notice. APEM www.apem.com TW_JOYST1602R2US