Ordering information Three phase input type(1-stage filter) TAC series(50,60,80,100,150A) TAC -50 -223 1 2 -O 3 4 1 Model Name 2 Rated Current 3 Line to ground capacitor code:See table 1.1. R table1.1 Line to ground capacitor code Code 103 223 333 Line to ground Leakage Current capacitor (Input 250/500V 60Hz) (nominal value) 1.0mA/2.0mA max 10,000pF 2.5mA/5.0mA max 22,000pF 3.5mA/7.0mA max 33,000pF *When the line to ground capacitor code is different, the attenuation characteristic is different. 4 Option U:Improve differential mode attenuation (Rated voltage 250V) Features of TAC series High-attenuation type of common mode noise from 150kHz to 1MHz (1-stage filter) - Three phase rated voltage 500 VAC (voltage range:528V max) - Selectable leakage current value Specifications No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Items Rated Voltage[V] Rated Current[A] Test Voltage (Terminal-Mounting Plate) Isolation Resistance (Terminal-Mounting Plate) Leakage current 250/500V 60Hz DC resistance Safety agency approval temperatures Operating temperature Operating humidity Storage temperature/humidity Vibration Impact Safety agency approvals 14 Case size (without projection) 15 Weight TAC-50-223 TAC-60-223 TAC-80-223 TAC-100-223 TAC-150-223 AC Three Phase 500 (voltage range:528 max) 50/60Hz *1 50 60 80 100 150 2,500 VAC (Cutoff Current = 100mA), 1minute at room temperature and humidity 500 VDC 100MW min at room temperature and humidity 2.5mA/5.0mA max 7mW max 5mW max 5mW max 4mW max 3mW max -25 to +85C (Refer to Derating Curve) -40 to +85C (Refer to Derating Curve) 20 to 95%RH (Non condensing) -40 to +85C/20 to 95%RH (Non condensing) 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis 196.1m/s2 (20G), 11ms Once each X, Y and Z axis UL1283, CSA C22.2 No.8 (C-UL) , DIN EN60939 VDE0565 Teil3-1, ENEC 90X54X179 mm (WXHXD) 140X85X267 mm (WXHXD) 170X92X285 mm (WXHXD) [3.54X2.13X7.05 inches] [5.51X3.35X10.51 inches] [6.69X3.62X11.22 inches] 1.4kg max 3.8kg max 4.8kg max *1 Only "TAC-OOO-OOO-U", Three Phase 250 (275 max) Circuit Diagram Derating Curve (1) TAC-OOO-OOO Case LOAD 1 4 2 5 3 6 CY CY CY CY CY CY CY : Line to ground capacitor 100 Load Factor [%] LINE 80 60 40 20 0 -40 : Mounting Plate (2) TAC-OOO-OOO-U (Option : U) -30 -20 40 50 60 70 80 Ambient Temperature [C] Case LINE LOAD 1 4 2 5 3 6 CY CY CY CY CY CY CY : Line to ground capacitor TA-9 : Mounting Plate *Keep free ventilation holes for cooling. 90 TAC,TAH series (50,60,80,100,150A) External view TAC-50- OOO / TAC-60- OOO TAH-50- OOO / TAH-60- OOO 54 179 [7.05] [2.13] M4 42.5 Protection Earth [1.67] 159 37.5 [6.26] [1.48] 21.5 [0.85] Input Terminal Name Plate 6-M5 Output Terminal Output Terminal 17 [0.67] Input Terminal [3.11] 79 0.5 90 [3.54] Output Terminal Input Terminal Mounting Plate 2-f4.5 167 0.5 [0.18] Mounting Hole [6.57] Can not be mounted upside-down. (mounted the top surface) 2-f4.5X6 Terminal cover [0.18X0.24] Mounting Hole Tolerance : 1 [0.04] Weight : 1.4kg max Mounting Plate : Iron (surface finishing:nickel plating) t=1.2 [0.05] Case : PBT Dimensions in mm, [ ]=inches Terminal block screw tightening torque M5:3.0N-m (30.7kgf-cm) max Protection Earth screw tightening torque M4:1.6N-m (16.9kgf-cm) max TAC-80- OOO / TAC-100- OOO TAH-80- OOO / TAH-100- OOO 85 [3.35] 267 220 6.5 [8.66] Name Plate Output Terminal TA-11 252 0.5 [9.92] Can not be mounted upside-down. (mounted the top surface) [0.94] Output Terminal 24 Output Terminal 6.5 2-f6.5 54 [2.13] 6-M8 Input Terminal [0.26] Mounting Hole [2.3] [0.26] [1.1] 28 [3.9] 99 0.5 140 [5.51] Input Terminal Input Terminal 58.5 M6 Protection Earth [0.26] [10.51] Mounting Plate Terminal cover Tolerance : 1 [0.04] Weight : 3.8kg max Chassis Material : Stainless steel t=1.0 [0.04] Dimensions in mm, [ ]=inches Terminal block screw tightening torque M8:9.2N-m (93.9kgf-cm) max Protection Earth screw tightening torque M6:5.8N-m (59.2kgf-cm) max TAC,TAH series (50,60,80,100,150A) External view TAC-150- OOO TAH-150- OOO 92 [3.62] 285 65.5 [11.22] 238 61 Protection Earth 6.5 [0.26] [9.37] [2.58] M6 [2.4] 6-M8 Input Terminal Name Plate Output Terminal Output Terminal Output Terminal 6.5 [0.26] 24 Input Terminal [0.94] [1.1] 28 [4.8] 122 0.5 170 [6.69] Input Terminal 2-f6.5 [0.26] Mounting Hole Mounting Plate Terminal cover 270 0.5 [10.63] Can not be mounted upside-down. (mounted the top surface) Tolerance : 1 [0.04] Weight : 4.8kg max Chassis Material : Stainless steel t=1.0 [0.04] Dimensions in mm, [ ]=inches Terminal block screw tightening torque M8:9.2N-m (93.9kgf-cm) max Protection Earth screw tightening torque M6:5.8N-m (59.2kgf-cm) max TA-12