500W, SINGLE-OUTPUT, HIGH DC VOLTAGE POWER SUPPLY HVC419 SERIES - PLUG-IN MODULE * * * * * * * * Compact size - 4U x 304mm x 16HP Single regulated and adjustable output 500W of output power with convection cooling Full electronic protection Telecom quality Field-proven design Also available in a stand-alone version N+1 redundancy available The HVC419 Series of AC/DC converters uses a field-proven high frequency conversion technology to generate 500W of output power at high DC voltage with convection cooling. Output voltages from 60V to 300VDC are available. This design features low component count and high efficiency. The use of high quality components and rigorous quality control results in an MTBF exceeding 100,000 hours at 45oC. The HVC419 module plugs into a pre-wired 19" or 23" shelf which can hold up to 5 modules. The rear of the shelf has terminal strips for the input and output connections. SPECIFICATIONS Input Voltage 115/230VAC +/- 15% 47 - 63Hz Input Protection Thermal Fuse Inrush current limiting Input Isolation 2250VDC input to chassis 4300VDC input to output, 8mm spacing 500VDC output to chassis Output Voltages 120VDC/4A and 240VDC/ 2A are standard Consult factory for other voltages RFI Suppression Meets FCC 20780 Class A and EN 55022 Class A conducted emissions Line/Load & Cross Regulation + /-1% combined Output Ripple/Noise Better than 1% of output voltage peak to peak or 0.2% RMS of the output voltage (20HZ BW) Output Overvoltage Protection Double regulator loop Full compliance to IEC950, CSA 22-2-950 and UL 1950 Please contact factory for approval status for the requested input/output configuration Overload Protection Current limiting with short circuit protection Self-resetting thermostat for thermal protection Efficiency Min 85% at full load Hold Up Time Minimum 10ms at full load for 5% drop of output voltage Operating Temperature 0 to +50oC with convection cooling. Extended temperature range available Temperature Drift 0.03% per oC over operating temperature range Dimensions Plug-in module: 4U x 304mm x 16HP Shelf: 4U x 19" or 23" x 15" Connections: H15 DIN connector for the modules Terminal strip for the shelf For other connectors please consult factory Warranty Twelve months subject to application within good engineering practice Enhancements to these general specifications and customizing can be accommodated upon request Designed to meet all approval requirements Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems and DC-input fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABT-approved Facility ABSOPULSE ELECTRONICS LTD 110 Walgreen Road Carp, Ontario K0A 1L0 CANADA Tel: (613) 836-3511 Binder Caption: AC/DC & DC/DC Power Systems Fax: (613) 836-7488 E-mail: absopulse@absopulse.com Visit us at www.absopulse.com 07/08/99 Made in Canada