1-66563-1 - Tyco Electronics

CPC Sealing Accessories

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Circular Plastic Connector Sealing Accessories

Sealing Caps

for Receptacles only

Sealing caps are used to protect

exposed contacts of unmated

receptacles.

Material and Finish

Cap—Thermoplastic, heat stabilized,

fire resistant, self-extinguishing, 94V-1

rated, black

Sealing Gasket—Neoprene, black

Bead Chain—Steel, nickel plated

Bead Chain Coupling—Brass, plated

nickel

Cable Entry Seals

Heat Shrinkable Sealing Boots

Cable entry seals are used with

jacketed cable to provide an

environmentally sealed wire-to-

connector system. They can be used

with either plugs or receptacles.

Thick Wall Boots

Material

Internal Sleeve—Nylon

Outer Tubing—Polyolefin, black

Shell Series Dimensions Plastic Strap Metal Bead Chain

Size A B Part No. Part No.

11 1 & 2 .360 .927 206903-1 208800-1

9.14 23.55

13 1 .360 1.055 211870-1 213485-1

9.14 26.80

17 1,2,& 3 .360 1.295 207445-1 208652-1

9.14 32.89

23 1, 3, & 4 .460 1.728 207446-1 208680-1

211.68 43.89 207446-2 208680-2

.143

[3.63] Dia.

Plastic Strap

Jacketed Cable

BDia.

Min.

AMin.

3.000±.030

[76.2±0.76]

Thin Wall Boot

Material

Inter Sleeve—Nylon

Outer Tubing—Polyolefin

Expanded Wall Thickness—

.020 [0.51]

Max. Recovered Wall Thickness—

.040 [10.16]

Sealing Range—.250 [6.35]-

.500 [12.70] Dia.

.625±.015

[15.88±0.38]

Dia.

1.027

[26.09]

Dia.

Threaded Sleeve

Tubing with Sealant

.875±.010

[22.22±0.25]2.000±.025

[50.80±0.64]

15/16-20 UNEF 38 THD

Shell Size 17

Part No. 213933-1

B±.015

[±0.38]

Shell Dimensions Expanded Sealing Max. Recovered

Size Wall Range Inside Part

A B Thickness (Dia.) Diameter No.

11 2.500 .625 .050 Ref. .250 - .600 .160 54010-4

63.50 15.88 1.27 Ref. 6.35 - 15.24 4.06

.250 54010-1

6.35

13 2.500 .775 .060Ref. .250 - .375 .220 54123-2

63.50 19.68 1.52 Ref. 6.35 - 9.53 5.59

.375 - .725 .300 54123-1

9.53- 18.42 7.62

2.500 .975 .060 Ref. .400 - .875 .375ef. 54011-1

63.50 24.76 1.52 Ref. 10.16 - 22.22 9.52

3.000 .54011-3

76.20

23 3.000 1.250 .070 Ref. .550 - 1.250 .500 54012-1

76.20 31.75 1.78 Ref. 13.97 - 31.75 12.70

Circular Plastic Connector Sealing Accesories (Continued)

Female

Jacketed Cable Seals

(for Shell Size 23)

Ajacketed cable seal kit provides an

environmentally sealed connection

for jacketed cable.

Material

Peripheral Seal—Grey elastomer

Collar—Aluminum

Jacketed Cable Seal—Black

rubber

Back-Shell Extender—Black

glass-filled thermoplastic

Special Clamp Saddle—Black

thermoplastic

Note: Jacketed cable seals must be

used with large cable clamps and

can be used on plugs or receptacles.

Large cable clamps are to be

ordered separately (see page 38).

Each jacketed cable seal kit

includes:

•Peripheral Seal—to be

discarded if kit is used on plug.

Additional seals may be

purchased (see page 51)

• Collar—provides bearing surface

for back-shell extender

• Jacketed Cable Seal

• Back-Shell Extender

• Special Clamp Saddle—to be

used in lieu of clamping insert

supplied with large cable clamp

Rubber Boot

Rubber boots are used with

jacketed cable to provide splash-

proof connections for Series 1

and Series 3 connectors.

(Not for Metal Shell Connectors.)

Material

Black neoprene

3.500±.030

[88.9±0.76]

1.095

[27.81]

Dia.

See Sealing

Range (Dia.)

Special

Clamp

Saddle

Large Cable Clamp

Part No. 206512-5

(See Note)

Back-Shell

Extender

Collar

Jacketed

Cable Seal*

Plug

(See Note)

Sealing

Range Kit

(Dia.) Number

.300-.450

7.62-11.43 207052-1

.450-.600

11.43-15.24 207052-2

.600-.875

15.24-22.22 207052-3

*Jacketed cable seal is pressed flush against rear

connector face when back-shell extender is threaded

onto rear of connector.

1.800±.020

[45.72±0.51]

Plug

(See Note 1)

Rubber

Boot

Jacketed

Cable

Shell Cable Dia. Dimensions Part

Size Sealing Range ABCD

No.

.219-.438 .750 .300 .600 .170

11 5.56-11.13 19.05 7.62 15.24 4.32 206304-1

Notes: 1. Rubber boots are recommended for use with jacketed cable and can be used on plugs or receptacles,

except Series 2 connectors.

Notes: 2. For detailed performance data on rubber boots, refer to Product Specification No. 108-10024.

+.000

1.290–0.15

[32.77–0.38]

Dia.

B±.010

[±0.25]

A±.010

[±0.25]

CPC Sealing Accessories

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

CPC Sealing Accessories

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Circular Plastic Connector Sealing Accesories (Continued)

Flexible Cable Protection

System

Product Facts

■For cables that require

better protection

■Fittings allow more

reliable connections to

be made

■Sealed fittings enhance

reliability of machinery

operating under many

extreme environmental

conditions encountered

in manufacturing and

construction industries

■High-quality, complete

systems are available

combining innovative

technology with rapid

in-stock availability

■Conforms with the latest

industry standards

■Recognized under the

Component Program of

Underwriters

Laboratories Inc.

on applied products as

marked.

■Certified by Canadian

Standards

Association on

applied products as marked.

■Certified by VDE on

applied products

as marked.

Related Product Data

Catalog 1654227

Identification Products

Technical Documents

Product Specifications

108-1696 FLEXAgraff Metal Conduits

108-1696-1 ROHRflex Plastic Tubing

108-1696-2 AIRflex Plastic Conduits

Application Specifications

114-18274 FLEXAgraff-AS,-PU-AS,

-ME-ASF Metal Conduits

114-18275 FLEXAgraff-CU Metal

Conduits

114-18276 AIRflex-KUW-PU

Plastic Conduits

114-18277 ROHRflex-PA 6,

ROHRflex-PA 6 S,ROHRflex-

PA 12 Plastic Tubing

Circular Plastic Connectors (CPC) / FLEXAquick-System Selection Aid

CPC Female ROHRflex-PA 6 Male Male Flat

Shell ROHRflex quick Plastic ROHRflex quick ROHRflex quick Counternut Sealing

Size Connector Tubing Connector Elbow Connector Washer

11 1-969807-2 969789-2 969803-2 969817-2 796260-2 796257-2

13 1-969809-3 969789-3 969803-3 969817-3 796260-3 796257-7

17 1-969811-4 969789-4 969803-4 969817-4 796260-5 796257-8

23 2-969813-5 969789-5 969803-5 969817-5 796260-6 796257-9

Typical Industrial Application

NOTE:

Request Flexible Cable Protection

System Catalog 1307244.

Engineering Notes

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

MIL-C-5015 Style

Circular Plastic Connectors

MIL-C-5015 Style Circular Plastic Connectors (CPC)

Product Facts

nIntermateable with other

manufacturers’ Metal-Shell

Sizes 20-14 and 18-10,

MIL-C-5015 Style

Connectors

nHigh impact resistant plastic

housing

nLighter weight

nLower cost

nIndustry accepted, Type III+

pin and socket contacts,

available on reels in strip-

form for high volume, low

cost, automatic machine

terminations

nContacts also available in

loose piece form for low

volume, prototype or

maintenance and repair

nHousing designed to prevent

mismating with other insert

arrangements

nRecognized under the

Component Program of

Underwriters

Laboratories Inc.,

File No. E28476

nCertified by

Canadian Standards

Association,

File No. LR 7189

This new addition to the

AMP Circular Plastic

Connector Line is

specifically designed to be

intermateable with other

manufacturers’ Metal-Shell

sizes 20-14 and 18-10,

MIL-C-5015 Style Connector

Systems. The high impact

resistant plastic housing

offers the advantages of

lighter weight and lower

cost than existing metal

shell connectors. In

addition, the connector

design prevents mismating

when used with other insert

arrangements. As part of

the AMP Multimate Family of

Connectors, the MIL-C-5015

style connector offers the

additional economies of

crimp Type III+ Pin and

Socket contacts in reel-

mounted, strip-form for high

volume automatic machine

termination, as well as in

loose piece form for low

volume, prototype or

maintenance and repair.

Technical Documents

Application Specification

114-10004 Contacts, Type III+

Product Specifications

108-10024 CPC Connectors

108-10042 Contacts, Type III+

Instruction Sheets

408-7582 Accessories for

CPC Connectors

408-7592-A Improved Strain

Relief Clamps for

CPC Connectors

408-7593 CPC Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 20-14

[ ]

Plug Kit, Unassembled

Reverse Sex (Accepts pins)

Part Number 213571-2

without Cable Clamp

Standard Sex (Accepts sockets)

Part Number 213652-1

without Cable Clamp

Cable Clamps O.D.

Part No. Type Max.

206070-8 standard .453

[11.51]

206322-9 large .703

[17.86]

Receptacle, Square Flange

Reverse Sex (Accepts sockets)

Part Number 213570-1

Standard Sex (Accepts pins)

Part Number 213651-1

Receptacle, Free-Hanging

Reverse Sex (Accepts sockets)

Part Number 213650-1

5-20 Self Tapping Screw,

Quantity 2

1.180

[29.97]

Dia.

.578

[14.68]

.625

[15.88]

1.410/1.350

[35.81/34.29]

Dia.

2.839±.040

[72.11±1.02]

Panel Cutout

1.565

[39.75]

Max. Dia.

Mating Face

Clamping Inserts

.703

[17.86]

Max. Outside Dia.

1.210

[30.73] Max.

.161

[4.09]

1.156±.010

[29.36±.025]

Typ.

1.131±.025

[28.73]

Dia.

1.665±.030

[42.04±0.76]

1.174±.010

[29.82±0.25]

1.156±.010

[29.36±0.25]

Typ.

Assembled with Cable Clamp

1.635

[41.53]

Max.

15/16-20 UNEF

1.180

[29.97]

Dia.

1.045±.003

[26.54±0.08]

Dia.

1.635

[41.53]

Max.

15/16-20 UNEF

Standard Sex

Reverse Sex

Coupling Ring

1.470

[37.34]

Max. Dia.

11/4-18 UNEF

1.500±.025

[38.10±0.64]

1.165±.010

[29.59±0.25]

Dia.

1.156±.010

[29.36±.025]

Typ.

1.500±.025

[38.10±0.64]

Reverse Sex

Standard Sex

Mating Face

1.560

[39.62] Max.

1.156±.010

[29.36±.025]

Typ.

11/4-18 UNEF

1.500±.025

[38.10±0.64]

Mating Face

11/4-18 UNEF 15/16-20 UNEF

1.210

[30.73] Max.

1.165

[29.59]

Dia.

1.500±.025

[38.10±0.64]

1.156±.010

[29.36±0.25]

Typ.

.578

[14.68]

.125+.007

-0.00

3.18+.018

-0.00

4Plc.

1.045±.003

[26.54±0.08]

Dia.

1.165±.010

[29.59±0.25]

Dia.

1.156±.010

[29.36±.025]

Typ.

MIL-C-5015 Style

Circular Plastic Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 18-10

Plug Kit, Unassembled

Reverse Sex (Accepts pins)

Part Number 213671-1

without Cable Clamp

Wire Size Range Ins. Dia. Contact Strip Form Contact No. Loose Piece Contact No. Strip Form Hand Tool

AWG mm2Range Finish Code Pin Socket Pin Socket Applicator Part No.

.060-.135 B 213605-7 1-66563-1 — 66565-7 567363-□†† 91542-15

24-20 0.2-0.6 1.52-3.43 A — 66563-8 — 66565-4

.110-.150 B 213603-5 66598-9 213603-6 66601-9 466958-1†† (for Sockets)

18-14 0.8-2 2.79-3.81 or 567364-□†† 91521-15

A 213603-3 66598-2 213603-4 66601-2 or 567834-1†† (for Sockets)

††Note: Applicators for AMP semiautomatic or fully-automatic termination equipment are available. Contact Technical Support.

***MIL-C-5015 style connectors require a longer Multimate pin contact. This contact is .145 [3.68] longer than the standard Multimate pin contacts. It is not for

use in other Multimate connectors, socket contacts are standard Multimate Type III+ contacts.

Extraction Tool Part No. 305183

Note: Gold-plated contacts should not be mated with tin or silver plated contacts.

5To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No 217201-1,

Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).

.560

[14.22]

1.174±.010

[29.82±0.25]

15/16-20 UNEF

1.620±.010

[41.15±0.38]

.925±.003

[23.50±0.08]

Dia.

11/18-18 UNEF Coupling Ring

1.435±.010

[36.45±0.25]

Dia.

1.375±.015

[34.92±0.38]

1.375±.015

[34.92±0.38]

1.062±.010

[26.97±0.25]

Typ.

1.062±.010

[26.97±0.25]

Typ.

11/18-18 UNEF-2A

1.450±.010

[36.83±0.25]

.990±.010

[25.15±0.25]

Dia.

15/16-20 UNEF-2A

1.200±.010

[30.48±0.25]

1.115±.004

[28.32±0.10]

Dia.

[ ]

1.285/1.320

[32.64/33.53]

Dia.

Panel Cutout

1.062±.010

[26.97±0.25]

Typ.

.531

[13.49]

.125+.007

-0.00

3.18+.018

-0.00

4Plc.

.531

[13.49]

1.062±.010

[26.97±0.25]

Typ.

11/18-18 UNEF-2A

.535

[13.59] Pin*** Socket

Receptacle, Square Flange

Reverse Sex (Accepts sockets)

Part Number 213667-1

Receptacle, Free-Hanging

Reverse Sex (Accepts sockets)

Part Number 213668-1

Type III+ Contacts

Material

Contact—Brass

Spring—Stainless Steel

Contact Finish

A—.000030 [0.00076] gold on the

electrical engagement area over .000030

[0.00076] min. nickel

B—Tin

Related Product Data

Application Tooling—Pages 76-79

MIL-C-5015 Style

Circular Plastic Connectors

Engineering Notes

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell

Circular Plastic Connectors

Metal-Shell Circular Plastic Connectors

Product Facts

■Economical combination

of thermoplastic

UL 94V-0 rated connector

housings and metal shells

■Available in three sizes:

■Series 1–Accepts

Multimate contacts, shell

sizes 14-5, 14-7, 22-16,

28-24, and 28-37 standard

sex; 14-5, 14-7, 22-14,

and 28-37 reverse sex

■Series 2–Accepts 20 DF

and 20 DM contacts, shell

sizes 22-28 and 28-63

standard sex; 22-28 and

28-57 reverse sex

■Series 3–Accepts Type XII

power contacts, shell

sizes 22-3 and 28-7

standard and reverse sex

■Series 4–Accepts Multimate

contacts, and Type XII

power contacts, shell size

28-16M and 28-22M

standard sex

■Compatible with MIL

Spec metal housing type

connectors

■Choice of application

tooling to meet all

production requirements

AMP Metal-Shell Circular

Plastic Connectors offer

the reliability of higher

priced all metal connectors

at a fraction of the cost, and

are offered in the more

popular contact

configurations.

Connector housings are

made of lightweight, sturdy,

thermoplastic material that

are UL 94V-0 rated, with

zinc alloy, nickel plated

shells for added strength

and protection. These

connectors are available

in a variety of configurations

to meet your signal, low

current and high current

requirements. Operating

temperatures range from

-55°Cto +125°C [-67˚F to

+257˚F].

Signal and low current is

provided by a choice of

AMP Multimate contacts:

.062 [1.57] pin diameter

and 20 DF and 20 DM

contacts, .040 [1.02] pin

diameter. High current

requirements are met by

the Type XII capable of

carrying up to 35 amperes

of current.

These quick connect/

disconnect circular

connectors feature

polarized housings to

prevent mismating with

other insert arrangements.

AMP Metal-Shell Circular

Plastic Connectors are

available in square flange

receptacles and free-

hanging plug connectors.

For additional economy,

industry accepted AMP

Type III+ pin and socket

contacts are available on

reels in strip-form for high

volume, low cost, automatic

machine terminations. For

low volume, prototype or

maintenance and repair

Type III+ contacts are also

available in loose piece

form.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell Circular Plastic Connectors, Series 1

Metal-Shell CPC

Connectors, Series 1,

Standard Sex

Listed part numbers are for

connectors only; contacts must

be ordered separately.

Material and Finish

Square Flange Receptacle—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Grooved Pin—Steel alloy, plated nickel

Plug—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Tetraseal Seal—Fluorocarbon

Retainer Ring—Stainless steel

Coupling Ring—Zinc alloy, plated

nickel

Related Product Data

Contacts—Pages 17-21

Contact Arrangement—Page 61

Component Dimensions—Page 70

Accessories—Page 71

Performance Characteristics—

Page 6

Application Tooling—Pages 76-79

Technical Documents—Page 80

TETRASEALS Ring

(Installed in plugs only.)

The TETRASEALS Ring provides splash-

proof sealing between mating metal

shells. It is located behind the plug shell

external keys (under the coupling ring).

When mated with a receptacle, the ring

is compressed against the inside

diameter of the mating end edge of the

receptacle shell.

Rear Mount Panel Cutout Front Mount Panel Cutout

Square Flange Receptacles

(Accepts Multimate Pins)

Plugs

(Accepts Multimate Sockets)

Dia.

Mating Face

.975±.010

[24.77±0.03]

2Plc.

Arrangement Square Flange Plug Part No.

Receptacle without TETRASEALS Ring with TETRASEALS Ring

14-5 208719-1 208718-1 208718-2

14-7 208715-1 208714-1 208714-2

22-16 208489-1 208488-1 208488-3

28-24 208459-1 208457-1 208457-3

28-37 208471-1 208470-1 208470-3

Note: Maximum wire insulation diameter is .100 [2.54], except arrangements 14-5 and 28-24 are .150 [3.81] max.

Dia.

TETRASEALS

Ring

Metal-Shell CPC

Series 1

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC

Series 1

Metal-Shell Circular Plastic Connectors, Series 1 (Continued)

Metal-Shell CPC

Connectors, Series 1,

Reverse Sex

Listed part numbers are for

connectors only; contacts must

be ordered separately.

Material and Finish

Square Flange Receptacle—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Grooved Pin—Steel alloy, plated nickel

Plug—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Tetraseal Seal—Fluorocarbon

Retainer Ring—Retainer Ring

Coupling Ring—Zinc alloy, plated

nickel

Related Product Data

Contacts—Pages 17-21

Contact Arrangement—Page 61

Component Dimensions—Page 70

Accessories—Page 71

Performance Characteristics—

Page 6

Application Tooling—Pages 76-79

Technical Documents—Page 80

TETRASEALS Ring

(Installed in plugs only.)

The TETRASEALS Ring provides splash-

proof sealing between mating metal

shells. It is located behind the plug shell

external keys (under the coupling ring).

When mated with a receptacle, the ring

is compressed against the inside

diameter of the mating end edge of the

receptacle shell.

Arrangement Square Flange Plug Part No.

Receptacle without TETRASEALS Ring with TETRASEALS Ring

14-5 208721-1 208720-1 —

14-7 208717-1 208716-1 208716-2

22-14 208487-1 208486-1 208486-3

28-37 208473-1 208472-1 208472-3

Note: Maximum wire insulation diameter is .100 [2.54], except arrangements 14-5 and 28-24 are .150 [3.81] max.

Square Flange Receptacles

(Accepts Multimate Sockets)

Rear Mount Panel Cutout Front Mount Panel Cutout

Plugs

(Accepts Multimate Pins)

Mating Face

Dia.

TETRASEALS

Ring

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC Connectors, Series 1, Contact Arrangements

Note: Contact arrangements

shown are of pin mating face (plug

or receptacle). Socket mating face

is mirror image.

Shell Size 14

Shell Size 22

Shell Size 28

.170 .000 .170

[4.32] [4.32]

.094 .094

[2.39] [2.39]

.172 .000 .172

[4.37] [4.37]

.086 .086

[2.18] [2.18]

.126

[3.2]

.047

[1.19]

.000

.126

[3.2]

.130

[3.3]

.130

[3.3]

.000

Arrangement 14-5 Arrangement 14-7

Max. Wire Ins. Dia. = .150 [3.81] Max. Wire Ins. Dia. = .100 [2.54]

.150 .150

[3.81] .000 [3.81]

.225 .075 .075 .225

[5.72] [1.90] [1.90] [5.72]

.000

.193 .043 .032 .182

[4.9] [1.09] [0.81] [4.62]

.268 .118 .107 .257

[6.81] [3] [2.72] [6.53]

.205 [5.21]

.075 [1.91]

.000

.075 [1.91]

.205 [5.21]

.260 [6.6]

.130 [3.3]

.000

.130 [3.3]

.260 [6.6]

.150

[3.81] .150 [3.81]

Arrangement 22-14 Arrangement 22-16

Max. Wire Ins. Dia. = .100 [2.54] Max. Wire Ins. Dia. = .100 [2.54]

.375 .225 .075 .075 .225 .375

[9.52] [5.72] [1.90] [1.90] [5.72] [9.52]

.450 .300 .150 .000 .150 .300 .450

[11.43] [7.62] [3.81] [3.81] [7.62] [11.43]

.364 .182 .000 .182 .364

[9.25] [4.62] [4.62] [9.25]

.455 .273 .091 .091 .273 .455

[11.56] [6.93] [2.31] [2.31] [6.93] [11.56]

.316 [8.03]

.158 [4.01]

.000

.158 [4.01]

.316 [8.03]

.390 [9.91]

.260 [6.6]

.130 [3.3]

.000

.130 [3.3]

.260 [6.6]

.390 [9.91]

.150 [3.81]

Arrangement 28-24 Arrangement 28-37

Max. Wire Ins. Dia. = .150 [3.81] Max. Wire Ins. Dia. = .100 [2.54]

Metal-Shell CPC

Series 1

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC

Series 2

Metal-Shell Circular Plastic Connectors, Series 2

Metal-Shell CPC

Connectors, Series 2,

Standard Sex

Listed part numbers are for

connectors only; contacts must

be ordered separately.

Material and Finish

Square Flange Receptacle—

Housing and Retention Insert—

Thermoplastic, UL 94V-0 rated, black

Metal-Shell—Zinc alloy, plated nickel

Grooved Pin—Steel alloy, plated nickel

Plug—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Tetraseal Seal—Fluorocarbon

Retainer Ring—Stainless steel

Coupling Ring—Zinc alloy, plated

nickel

Related Product Data

Contacts—Pages 29-30

Contact Arrangement—Page 64

Component Dimensions—Page 70

Accessories—Pages 38, 39 and 71

Performance Characteristics—

Page 6

Application Tooling—Pages 76-79

Technical Documents—Page 80

Part No.

Arrangement Square Flange Plug

Receptacle without Tetraseals Ring

22-28 208491-1 208490-1

28-63 208477-1 208476-1

Recommended Panel Cutout

Square Flange Receptacles

(Accepts 20 DF and 20 DM Pins)

Plugs

(Accepts 20 DF and 20 DM Sockets)

Mating Face

Dia.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell Circular Plastic Connectors, Series 2 (Continued)

Metal-Shell CPC

Connectors, Series 2,

Reverse Sex

Listed part numbers are for

connectors only; contacts must

be ordered separately.

Material and Finish

Square Flange Receptacle—

Housing and Retention Insert—

Thermoplastic, UL 94V-0 rated, black

Metal-Shell—Zinc alloy, plated nickel

Grooved Pin—Steel alloy, plated nickel

Plug—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Tetraseal Seal—Fluorocarbon

Retainer Ring—Stainless steel

Coupling Ring—Zinc alloy, plated

nickel

Related Product Data

Contacts—Pages 29-30

Contact Arrangement—Page 64

Component Dimensions—Page 70

Accessories—Pages 38, 39 and 71

Performance Characteristics—

Page 6

Application Tooling—Pages 76-79

Technical Documents—Page 80

Part No.

Arrangement Square Flange Plug

Receptacle without Tetraseals Ring

22-28 208493-1 208492-1

28-57 208475-1 208474-1

Rear Mount Panel Cutout Front Mount Panel Cutout

Square Flange Receptacles

(Accepts 20 DF and 20 DM Sockets)

Plugs

(Accepts 20 DF and 20 DM Pins)

Mating Face

Dia.

Metal-Shell CPC

Series 2

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC

Series 2

Metal-Shell CPC Connectors, Series 2, Contact Arrangements

Note: Contact arrangements

shown are of pin mating face (plug

or receptacle). Socket mating face

is mirror image.

.372 .248 .124 .000 .124 .248 .372

[9.45] [6.3] [3.15] [3.15] [6.3] [9.45]

.434 .310 .186 .062 .062 .186 .310 .434

[11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02]

.124

[3.15]

Arrangement 28-57 Arrangement 28-63

Max. Wire Ins. Dia. = .068 [1.73] Max. Wire Ins. Dia. = .068 [1.73]

Shell Size 22

Shell Size 28

.443 [11.25]

.319 [8.1]

.212 [5.38]

.105 [2.67]

.019 [0.48]

.143 [3.63]

.250 [6.35]

.357 [9.07]

.464 [11.79]

.000

.248 .124 .000 .124 .248

[6.3] [3.15] [3.15] [6.3]

.310 .186 .062 .062 .186 .310

[7.87] [4.72] [1.57] [1.57] [4.72] [7.87]

.294 [7.47]

.170 [4.32]

.062 [1.57]

.000

.062 [1.57]

.170 [4.32]

.294 [7.47] .124

[3.15]

.434 .310 .186 .062 .062 .186 .310 .434

[11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02]

.496 .372 .248 .124 .000 .124 .248 .372 .496

[12.6] [9.45] [6.3] [3.15] [3.15] [6.3] [9.45] [12.6]

.448 [11.38]

.340 [8.64]

.232 [5.89]

.108 [2.74]

.000

.108 [2.74]

.232 [5.89]

.340 [8.64]

.448 [11.38]

.124 [3.15]

Arrangement 22-28

Max. Wire Ins. Dia. = .068 [1.73]

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell Circular Plastic Connectors, Series 3

Metal-Shell CPC

Connectors, Series 3,

Standard Sex

Listed part numbers are for

connectors only; contacts must

be ordered separately.

Material and Finish

Square Flange Receptacle—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Peripheral Seal—Elastomer, grey

Grooved Pin—Stainless steel

Plug—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Tetraseal Seal—Fluorocarbon

Retainer Rings—Stainless Steel

Coupling Ring—Zinc alloy, plated

nickel

Related Product Data

Contacts—Page 34-35

Contact Arrangement—Page 67

Component Dimensions—Page 70

Accessories—Pages 38, 39 and 71

Performance Characteristics—

Page 6

Application Tooling—Pages 76-79

Technical Documents—Page 80

TETRASEALS Ring

(Installed in Plugs only)

The TETRASEALS Ring provides splash-

proof sealing between connector metal-

shells. It is located behind the plug-shell

external keys (under the coupling ring).

When mated with a receptacle, the ring is

compressed against the inside diameter

of the mating end edge of the receptacle

shell.

Arrangement Square Flange Plug Part No.

Receptacle without TETRASEALS Ring with TETRASEALS Ring

22-3 208495-1 208494-1 208494-3

28-7 208483-1 208482-1 —

Recommended Panel Cutout

Square Flange Receptacles

(Accepts Type XII Male Pins)

Plugs

(Accepts Type XII Female Sockets)

Mating Face

Dia.

TETRASEALS

Ring

Metal-Shell CPC

Series 3

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

Metal-Shell CPC

Series 3

Metal-Shell Circular Plastic Connectors, Series 3 (Continued)

Metal-Shell CPC

Connectors, Series 3,

Reverse Sex

Listed part numbers are for

connectors only; contacts must

be ordered separately.

Material and Finish

Square Flange Receptacle—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Peripheral Seal—Elastomer, grey

Grooved Pin—Stainless steel

Plug—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Tetraseal Seal—Fluorocarbon

Retainer Rings—Stainless Steel

Coupling Ring—Zinc alloy, plated

nickel

Related Product Data

Contacts—Page 34-35

Contact Arrangement—Page 67

Component Dimensions—Page 70

Accessories—Pages 38, 39 and 71

Performance Characteristics—

Page 6

Application Tooling—Pages 76-79

Technical Documents—Page 80

TETRASEALS Ring

(Installed in Plugs only)

The TETRASEALS Ring provides splash-

proof sealing between connector metal-

shells. It is located behind the plug-shell

external keys (under the coupling ring).

When mated with a receptacle, the ring is

compressed against the inside diameter

of the mating end edge of the receptacle

shell.

Arrangement Square Flange Plug Part No.

Receptacle without TETRASEALS Ring with TETRASEALS Ring

22-3 208497-1 208496-1 —

28-7 208485-1 208484-1 208484-3

Recommended Panel Cutout

Square Flange Receptacles

(Accepts Type XII Female Sockets)

Plugs

(Accepts Type XII Male Pins)

Mating Face

Dia.

TETRASEALS

Ring

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC Connectors, Series 3, Contact Arrangements

Note: Contact arrangements

shown are of pin mating face (plug

or receptacle). Socket mating face

is mirror image.

Shell Size 22

Shell Size 28

.148 .000 .148

[3.76] [3.76]

.107 [2.72]

.000

.213 [5.41]

Arrangement 22-3

Max. Wire Ins. Dia. = .220 [5.59]

.343 .172 .000 .172 .343

[8.71] [4.37] [4.37] [8.71]

.296 [7.52]

.000

.296 [7.52]

Arrangement 28-7

Max. Wire Ins. Dia. = .220 [5.59]

Metal-Shell CPC

Series 3

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC

Series 4

Metal-Shell Circular Plastic Connectors, Series 4

Metal-Shell CPC

Connectors, Series 4

Listed part numbers are for

connectors only; contacts must

be ordered separately.

Material and Finish

Square Flange Receptacle—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Grooved Pin—Stainless steel

Plug—

Housing—Thermoplastic, UL 94V-0

rated, black

Metal-Shell—Zinc alloy, plated nickel

Tetraseal Seal—Fluorocarbon

Retainer Rings—Stainless Steel

Coupling Ring—Zinc alloy, plated

nickel

Related Product Data

Contacts—Pages 17-23 and 34-35

Contact Arrangement—Page 69

Component Dimensions—Page 70

Accessories—Pages 38, 39 and 71

Performance Characteristics—

Page 6

Application Tooling—Pages 76-79

Technical Documents—Page 80

TETRASEALS Ring

(Installed in Plugs only)

The TETRASEALS Ring provides splash-

proof sealing between connector metal-

shells. It is located behind the plug-shell

external keys (under the coupling ring).

When mated with a receptacle, the ring is

compressed against the inside diameter

of the mating end edge of the receptacle

shell.

Arrangement Square Flange Plug Part No.

Receptacle without TETRASEALS Ring with TETRASEALS Ring

Standard Sex Reverse Sex Standard Sex Reverse Sex Standard Sex

28-16M 208479-1 1776088-1 208478-1 1776089-1 208478-3

28-22M 208481-1 — 208480-1 — 208480-3

Rear Mount Panel Cutout

Square Flange Receptacles

(Standard Sex Receptacles accept Type XII Male and Multimate Pins. Reverse Sex Receptacles accept Type XII

Female and Multimate Sockets.)

Plugs

(Standard Sex Plugs accept Type XII Female and Multimate Sockets. Reverse Sex Plugs accept Type XII Male and

Multimate Pins.)

Front Mount Panel Cutout

Mating Face

Dia.

TETRASEALS

Ring

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC Connectors, Series 4, Contact Arrangements

Note: Contact arrangements

shown are of pin mating face (plug

or receptacle). Socket mating face

is mirror image.

Shell Size 28

.276 .092 .092 .276

[7.01][2.34][2.34][7.01]

.400 .184 .000 .184 .400

[10.16][4.67] [4.67] [10.16]

.400 [10.16]

.316 [8.03]

.158 [4.01]

.000

.158 [4.01]

.316 [8.03]

.400 [10.16]

Arrangement 28-16M

Max. Wire Ins. Dia. =

.150 [3.81] for Multimate Contacts,

.220 [5.59] for Power Contacts

.364 .182 .000 .182 .364

[9.25][4.62] [4.62][9.25]

.455 .273 .091 .091 .273 .455

[11.56][6.93][2.31][2.31][6.93][11.56]

.382 [9.7]

.316 [8.03]

.158 [4.01]

.000

.158 [4.01]

.316 [8.03]

.382 [9.7]

Arrangement 28-22M

Max. Wire Ins. Dia. =

.150 [3.81] for Multimate Contacts,

.220 [5.59] for Power Contacts

Metal-Shell CPC

Series 4

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC

Component Dimensions

Metal-Shell CPC Connectors Component Dimensions

For drawings, technical data or

samples, contact your sales

engineer or call Technical Support.

Square Flange Receptacles

Plugs

Thread-Size:

7/8-20 UNEF-2A

(Shell Size 14)

15/16-20 UNEF-2A

(Shell Size 22)

1-3/8-18 UNEF-2A

(Shell Size 28)

DMax.

AMax.

HDia.

Panel Cutout, Front Mounted

Receptacle

Panel Cutout, Rear Mounted

Receptacle

Arrangement Dimensions

Series No. Sex AB CDEFGH JK LM

Std. 1.415 .745 .100 1.031 .906 1.185 1.070 1.070 .125 1.400 1.225 .380

14-5 Rev. 35.94 18.92 2.54 26.19 23.01 30.1 27.18 27.18 3.18 35.56 31.12 9.65

Std. 1.415 .745 .100 1.031 .906 1.185 1.070 1.070 .125 1.400 1.225 .380

14-7 Rev. 35.94 18.92 2.54 26.19 23.01 30.1 27.18 27.18 3.18 35.56 31.12 9.65

1.190 .790 .103 1.503 1.250 1.534 1.156 1.554 .120 1.560 1.750 .380

22-14 Rev. 30.22 20.07 2.62 38.18 31.75 38.96 29.36 39.47 3.05 39.62 44.45 9.65

11.470 .790 .103 1.503 1.250 1.534 1.156 1.554 .120 1.265 1.750 .380

22-16 Std. 37.34 20.07 2.62 38.18 31.75 38.96 29.36 39.47 3.05 32.13 44.45 9.65

1.555 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 1.560 2.170 .380

28-24 Std. 39.5 22.23 3.18 48.26 39.67 49.53 40.89 50.04 3.68 39.62 55.12 9.65

1.540 1.560

Std. 39.12 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 39.62 2.170 .380

28-37 1.260 22.23 3.18 48.26 39.67 49.53 40.89 50.04 3.68 1.840 55.12 9.65

Rev. 31.00 46.74

Std. .934 .790 .103 1.503 1.250 1.534 1.156 1.554 .120 1.295 1.750 .380

22-28 Rev. 23.72 20.07 2.62 38.18 31.75 38.96 29.36 39.47 3.05 32.89 44.45 9.65

1.229 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 1.408 2.170 .380

2 28-57 Rev. 31.22 22.22 3.18 48.26 39.67 49.53 40.89 50.04 3.68 35.76 55.12 9.65

1.229 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 1.408 2.170 .380

28-63 Std. 31.22 22.22 3.18 48.26 39.67 49.53 40.89 50.04 3.68 35.76 55.12 9.65

Std. 1.755 .790 .103 1.503 1.250 1.534 1.156 1.554 .120 1.805 1.750 .380

22-3 Rev. 44.58 20.07 2.62 38.18 31.75 38.96 29.36 39.47 3.05 45.85 44.45 9.65

3Std. 1.825 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 2.125 2.170 .380

28-7 Rev. 46.36 22.22 3.18 48.26 39.67 49.53 40.89 50.04 3.68 53.98 55.12 9.65

1.825 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 2.125 2.170 .380

28-13M Std. 46.36 22.22 3.18 48.26 39.67 49.53 40.89 50.04 3.68 53.98 55.12 9.65

1.825 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 2.125 2.170 .380

4 28-16M Std. 46.36 22.22 3.18 48.26 39.67 49.53 40.89 50.04 3.68 53.98 55.12 9.65

1.825 .875 .125 1.900 1.562 1.950 1.610 1.970 .145 2.125 2.170 .380

28-22M Std. 46.36 22.22 3.18 48.26 39.67 49.53 40.89 50.04 3.68 53.98 55.12 9.65

Front and Rear

Panel Thk.

.125

[3.18] Max.

Dia.

Thread-Size:

7/8-20 UNEF-2A

(Shell Size 14)

1-3/16-18 UNEF-2A

(Shell Size 22)

1-7/16-18 UNEF-2A

(Shell Size 28)

KMax.

F±.015

[±0.38]

E±.005

[±0.13]

C±.010

[±0.25]

B±.010

[±0.25]

L±.015

[±0.38]

M±.010

[±0.25]

E±.005

[±0.13]

J±.005

[±0.13]

E±.005

[±0.13]

Dia.

J±.005

[±0.13]

Dia.

G±.010

[±0.25]

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Metal-Shell CPC Connector Accessories

Cable Clamps

Material and Finish

Body and Clamp Halves—Zinc alloy,

nickel plated

Screws and Washers—Stainless

steel

Protective Cap Assemblies

(for Metal-Shell CPC

Receptacles Only)

Material and Finish

Zinc alloy, nickel plated

Shell Dimensions Cable

Size A B C O.D. Range Thread Size Part No.

.938 1.175 1.165 .225-.562

14 23.83 29.85 29.59 5.71-14.27 7/8-20 UNEF-3B 208945-5

.938 1.432 1.469 .325-.750

22 23.83 36.37 37.31 8.26-19.05 1-3/16-18 UNEF-3B 208945-7

1.031 1.593 1.688 .450-.938

28 26.19 40.46 42.88 11.43-23.83 1-7/16-18 UNEF-3B 208945-8

Shell Dimensions Expanded Sealing Range Max. Recovered

Size A B Wall Thickness (Dia.) Inside Dia. Part No.

22 3.000 1.250 .070 .550 - 1.250 .500 54012-3

28 76.20 31.75 1.78 13.97 - 31.75 12.70 54012-4

Notes: 1. For Shell Size 22 Receptacle use plastic cable clamp Size 17 (See page 38), for Shell Size 28 Receptacle use plastic cable

clamp Size 23 (See pages 38-39). Use Size 14 metal cable clamp for both plug and receptacle Size 14 connectors.

2. Metal cable clamps (Sizes 22 and 28) are for use with Metal-Shell CPC plugs ONLY.

Shell Dimensions Part

Size A B No.

1.225 .515

14 31.11 13.08 213823-2

1.750 .635

22 44.45 16.13 211903-1

2.170 .635

28 55.12 16.13 211904-1

Cable Dia.

Range

Internal

Threads

Screw with

Lock Washer

(Two Supplied)

Cable

Clamp

Body

Clamp Half

(Two Supplied)

Plug (Shown for

reference only)

3.000±.010

[76.2±0.25]Bead

Chain

B±.031

[±0.79]

A±.031

[±0.79]

C±.031

[±0.79]

A±.010

[±0.25]

B±.010

[±0.25]

Cable Entry Seals

Heat Shrinkable Sealing Boots

Cable entry seals are used with

jacketed cable to provide an

environmentally sealed wire-to-

connector system. They can be used

with plugs.

Thick Wall Boots

Material

Internal Sleeve—Nylon

Outer Tubing—Polyolefin, black

Metal-Shell CPC

Accessories

Engineering Notes

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Miniature Circular Plastic Connectors (CPC)

Product Facts

■Two shell sizes: Size 8 (1-4)

or Size 11 (5-9) contact

positions

■Pre-positioned 1/4 turn

coupling ring with positive

lock and alignment feature

■Unique contact pattern for

each position size helps

prevent accidental mating

with other position sizes

■Sealed to IP67 (Protected

against immersion in water

up to 1 meter for 1/2 hour)

■Front or rear jam nut panel

mounting

■No assembly required

■Receptacle available in

free-hanging or panel mount

versions

■Alternate keys available

AMP Miniature Circular

Plastic Connectors (CPC)

are available in wire-to-

wire and wire-to-panel

configurations.

Utilizes existing Mini-

Universal MATE-N-LOK

stamped and formed con-

tacts designed for up to

500 mating cycles when

plated with gold or up to 50

cycles with tin plating.

Material and Finish

Seal, Wire Entry—Elastomer, yellow

or white

Seal, Peripheral—Elastomer, gray

Housing—Thermoplastic, black or red

Protector, Seal—Thermoplastic,

natural

Ring, Coupling—Thermoplastic,

black

Nut, Jam—Brass, nickel plated

Plate, Seal Retention—

Thermoplastic, black

Technical Documents

Product Specification

108-2079 Miniature CPC Connectors

■Wide variety of custom

discrete type cable

assemblies, terminated

with Terminals and

Splices, Soft Shell,

and Circular Plastic

Connectors and other

crimp and mass-

terminated products.

■Capability to produce

custom overmolded

assemblies and insert

and injection molding.

■Jacketed cable

assemblies and discrete

wire: Subminiature-D,

SCSI, Circular Plastic,

VHDCI, USB and

Shielded Data Link

■For more information on

our cable assembly

capabilities, see our

website at

www.tycoelectronics.com/

cables

Nylon housings offer good

resistance to a wide range

of chemical agents while

the IP67 sealing helps

prevent ingress of dirt or

fluids that could have an

adverse effect on the

contact interface.

Ideal for Industrial,

Instrumentation and

Transportation applications

where size, contact density

and environmental expo-

sure are primary concerns.

Cable Assemblies

Miniature CPC

Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Miniature Circular Plastic Connectors (CPC) (Continued)

Receptacle Assembly,

Panel Mount

(Order pin contacts separately

— see page 75)

5/8-24

UNEF-2A

Thread

Jam Nut

& Flange Seal

shown for

reference only.

Must be ordered

separately.

.555

[14.1]

.125

[3.18]

1.142

[29.0]

.827

[21.00]

.125

[3.18] Max.

Panel

Thickness

1/2-20 UNF-2A

5/8-24

UNEF-2A

Thread

Jam Nut shown for

reference only.

Must be ordered

separately.

Flange Seal shown for

reference only.

Must be ordered

separately.

1/2-20 UNF-2A

White Alignment Dot

Alignment

Indicator

.555

[14.10]

1.142

[29.00]

Plug Assembly

(Order socket contacts

separately — see page 75)

Positive

Lock

Indicator

White

Aignment

Dots

Alignment

Indicator Slots

.413

[10.48]

.669 [17.00]

1.142±.010

[29.00±0.25]

Positive

Lock

Indicator

White

Aignment

Dots

Alignment

Indicator Slots

.413

[10.48]

.669 [17.00]

1.142±.010

[29.00±0.25]

Receptacle Assembly,

Free-Hanging

(Order pin contacts separately

— see page 75)

.551

[14.00]

.059

[1.5]

1/2-20 UNF-2A

Thread

.551

[14.00] .394

[10.0]

1.142

[29.0]

.606

[15.39]

1/2-20 UNF-2A

Thread

White

Alignment

Dot

.55

[14.10]

.06

[1.50]

1.14

[29.00]

Shell Size 8

(4 Position shown)

Related Product Data

Part Numbers—Page 74

Contacts—Page 75

Accessories—Page 75

Miniature CPC

Connectors

Miniature CPC

Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Miniature Circular Plastic Connectors (CPC) (Continued)

Shell Size 11

(9 Position shown)

Receptacle Assembly, Free-Hanging

(Order pin contacts separately — see page 75)

Receptacle Assembly,

Panel-Mount

(Order pin contacts separately

— see page 75)

3/4-20

UNEF-2A

Thread

Jam Nut & Flange

Seal shown for reference

only. Must be ordered

separately.

.689

[17.50]

.059

[1.50]

1.14

[29.00]

.555

[14.10]

Positive Lock

Indicator

3/4-20

UNEF-2A

Thread

.555

[14.10]

.689

[17.50]

.059 [1.50]

1.14

[29.00]

.902

[22.90]

.413

[10.48]

Positive

Lock

Indicator Alignment

Indicator

Slots

White

Alignment

Dots

.866 [22.00]

1.14 ±.010

[29.00 ± 0.25]

Plug Assembly

(Order socket contacts

separately — see page 75)

Housing Part Numbers Arrangement Housing Part Numbers

Shell No. of Insulation Panel Mount Free-Hanging

Size Pos. Diameter Range Receptacle Receptacle Plug

81 .035-.059 [.89-1.5]* 1445539-1 1445526-1 1445536-1

.059-.110 [1.5-2.39] 1445539-3 1445526-3 1445536-3

82 .035-.059 [.89-1.5]* 1445538-1 1445522-1 1445535-1

.059-.110 [1.5-2.39] 1445538-3 1445522-3 1445535-3

83 .035-.059 [.89-1.5]* 1445537-1 1445510-1 1445534-1

.059-.110 [1.5-2.39] 1445537-3 1445510-3 1445534-3

8 4 .035-.059 [.89-1.5]* 1445421-1 1445389-1 1445390-1

.059-.110 [1.5-2.39] 1445421-3 1445389-3 1445390-3

11 5 .035-.059 [.89-1.5]* 1445824-1 1445829-1 1445820-1

.059-.110 [1.5-2.39] 1445824-3 1445829-3 1445820-3

11 6 .035-.059 [.89-1.5]* 1445823-1 1445828-1 1445819-1

.059-.110 [1.5-2.39] 1445823-3 1445828-3 1445819-3

11 7 .035-.059 [.89-1.5]* 1445822-1 1445827-1 1445818-1

.059-.110 [1.5-2.39] 1445822-3 1445827-3 1445818-3

11 8 .035-.059 [.89-1.5]* 1445821-1 1445826-1 1445817-1

.059-.110 [1.5-2.39] 1445821-3 1445826-3 1445817-3

11 9 .035-.059 [.89-1.5]* 1445816-1 1445825-1 1445807-1

.059-.110 [1.5-2.39] 1445816-3 1445825-3 1445807-3

Note: Alternate keys available (115˚ part numbers shown in above chart)

*Insertion Tip (Seal Protector) Part No. 1604816-1 recommended for use when inserting socket contacts within this insulation range.

Standard stocked Part

Numbers in BOLD type.

KREF

SEE TABLE

Ø21.75

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Miniature Circular Plastic Connectors (CPC) (Continued)

Jam Nuts Shell Dimensions Part

Size ABThread Number

8.75 [19.0] .125 [3.2] 5/8-24 UNEF-2B 1604196-1

11 .875 [22.25] .125 [3.2] 3/4-20 UNEF-2B 1445904-1

see chart

for Threads

Dust Caps Shell Dimensions Part

Size AB

Number

8.795 [20.2] .551 [14.0] 1604089-1

11 .89 [22.6] .736 [18.7] 1604089-2

∅A±.025

[±0.64] ∅B±.025

[±0.64]

1.49±.010

[37.9±0.25]

.094

[2.4]

.146

[3.70]

Contacts and Application

Tooling

Pin (for Receptacles)

Socket (for Plugs)

.671 [17.04]

.659 [16.74]

Accessories (All accessories must be ordered separately.)

Strain Reliefs

Shell Dimensions Part Number

Size AB Straight Right-Angle

8.925 [23.5] .709 [18.0] 1445730-1 1445771-1

11 1.10 [28.0] .964 [24.5] 1445856-1 1546746-31

1546746-42

1Open Style 2With Cover A

Flange Seals Shell Dimensions Part

Size AB

Number

8.60 [15.3] .26 [6.6] 1445420-1

11 .73 [18.5] .33 [8.5] 1445420-2

Heat Shrink Boots Shell Dimensions Part

Size AB

Number

82.00 [50.8] .75 [19.0] 1546997-1

11 2.50 [63.5] 1.00 [25.4] 1546921-1

Sealant Length

Contact Part Numbers

Wire Size Ins. Dia. Material Pin Socket HDM Hand

Range Range and Finish Strip Loose Strip Loose Applicator Tool

AWG [mm2]Form Piece Form Piece Part No. Part No.

Brass, Pre-tin 770835-1 794059-1 770834-1 794058-1 567418-12

30-26 .035-.050 Phos. Brz., Pre-tin — — 770834-4 — 567418-2290717-2

[.05-.12] .889-1.27 Brass, Duplex11-770835-0 1-794059-0 1-770834-0 1-794058-0 567418-32

Phos. Brz., Duplex1— — 1-770834-1 —

Brass, Pre-tin 770901-1 770985-1 770902-1 770986-1 567066-33

26-22 .047-.069 Phos. Brz., Pre-tin — — 770902-4 — 567066-4391529-1

[.12-.3] 1.19-1.75 Brass, Duplex11-770901-0 1-770985-0 1-770902-0 1-770986-0 567066-53

Phos. Brz., Duplex1—— 1-770902-1 —

22-18 .059-.094 Brass, Pre-tin 770903-1 770987-1 770904-1 770988-1

[.3-.8] 1.50-2.39 Phos. Brz., Pre-tin — — 770904-4 — 567067-12

oror

Brass, Duplex11-770903-0 1-770987-0 1-770904-0 1-770988-0 567067-2291522-1

22x(2) .067 x (2) Phos. Brz., Duplex1—— 1-770904-1 — 567067-32

[.3] 3.38

1Duplex Finish – Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area

over .000050 [.00127] min. nickel underplate on entire contact.

2HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used

on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further

information.

3HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used

on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further

information.

Note: All part numbers are RoHS Compliant.

Contact Extraction Tool

Part No. 189727-1

Instruction Sheet 408-4118

Contact Insertion Tool

Part No. 455830-1

Instruction Sheet 408-7984

(For inserting contacts applied to small diameter

wire)

Insertion Tip (Seal Protector)

Part No. 1604816-1

(For inserting socket contacts applied to small

diameter wire)

Miniature CPC

Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Application Tooling

CERTI-CRIMP “C” Head

Straight Action Hand Tool

(SAHT), Part No. 69710-1

Premium grade hand tool.

Features ratchet control to

provide complete crimp

cycle. The interchangeable

die sets close in a straight

line to minimize contact or

terminal rotation during

crimping. When applicable,

user-assist features such as

acontact or terminal locator

and a wire stop, are built

into the die set. Approximate

weight 1.9 lb [0.86 kg].

For subminiature coaxial contacts, see

pages 22-23.

For more information, request Catalog

65780,Instruction Sheet 408-2095.

PRO-CRIMPER III Hand

Tool, Part No. 58495-1 Commercial grade hand

tool for crimping various

products. Features ratchet

control to provide complete

crimp cycle. Accepts both

pinned- and shouldered-

style die sets. Locators are

provided with pinned-style

die sets for proper contact

and wire positioning, and to

help minimize contact

rotation and bending during

crimping. Approximate

weight 1.3 lb [0.60 kg].

For use with Type III+ contacts, see

pages 17-19.

For more information, request Catalog

1773380,Instruction Sheet 408-9930.

SDE (Standard Die

Envelope) Die Sets SDE die sets provide cost-

effective flexibility, through

many options for a common

die-set outline. The SDE die

sets can be adapted for use

with CERTI-CRIMP hand

tools, PRO-CRIMPER III

hand tools, the SDE

Terminator and the 626

Pneumatic Tool System.

For more information, request Catalog

1654003.

626 Pneumatic Tool System Lightweight, air-operated

modular tooling system.

Accepts a wide variety of

interchangeable heads for

crimping various types of

contacts, terminals and

splices onto wires ranging

6-26 AWG [13-0.12 mm2],

plus coaxial and fiber optic

cable. Available with either

hand- or foot-actuation

switch. Optional ratchet

control available to provide

complete crimp cycle.

For subminiature coaxial contacts, see

pages 22-23.

For more information, request Catalog

124208.

Mechanical Hand Tools for

Interchangeable Die Sets

These tools are ideal for small produc-

tion, prototype and experimental applica-

tions. They are used for terminating pin

and socket contacts to wire and feature a

ratchet device to provide consistently

formed crimps.

Pneumatic Hand Tool for

Interchangeable Die Sets

SDE Terminator,

Part No. 1490076-2 An electric crimp terminator

with compact design

features a die set holder

that is compatible with all

AMP SDE (PRO-CRIMPER III

Tool) die sets. Hand- or

foot-actuated options are

available. CE Approved.

For more information, request Catalog

1654714.

Electric Machine for

Interchangeable Die Sets

92936-8112383

CERTI-CRIMP Straight

Action Hand Tools (SAHT) Premium grade hand tools.

Feature ratchet control to

provide complete crimp

cycle. Die sets close in a

straight line. Include a con-

tact locator and wire stop,

plus an insulation crimp

adjustment lever, when

applicable. Approximate

weight 1.3 lb [0.59 kg]

For Type III+ contacts, see pages 17-19.

For more information, request Catalog

65780.

112076

Application Tooling

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Application Tooling (Continued)

AMP-O-LECTRIC Model “G”

Terminating Machines,

Part Nos.

354500-1, -9, -11

Semiautomatic bench

machines for crimping

reeled terminals and con-

tacts, featuring a quiet and

reliable direct motor drive,

microprocessor controls for

ease of setup and opera-

tion, and guarding and

lighting designed for opera-

tor convenience and safety.

All models are equipped

with either manual or auto-

matic precision adjustment

of crimp height. Machine-

mounted sensors are avail-

able for crimp quality moni-

toring using conventional

miniature-style applicators.

For more information, request

Catalog 1654956-2,Video 198116,

Catalog 82275 [Crimp Quality

Monitor (CQM)],Video 198094.

Note: New Stripping Module

available, see page 79.

Crimp Machines

Crimp Quality Monitor (CQM)

Part No. 1320420-2

The unique system provides

100% on-the-fly crimp

inspection. It measures the

crimp height of each

termination, and evaluates

the quality of each crimp. If

acrimp is questionable, the

monitor alerts the operator

with both visual and audible

alarms. It also provides

ports for printing and

networking. When used with

AMP-O-LECTRIC Model “G”

Termination Machines, the

monitor is mounted to the

machine. When used with

AMPOMATOR CLS IV Lead

Making Machines, it is

integrated into the

machine’s operating

system.

For more information, request

Catalog 82275.

System III Applicator

The System III Applicator

introduces several new

technologies into the

applicator including a

precision servo-electric

motorized feeding system,

abuilt-in data module for

storing terminal crimp and

set-up information, a

precision fit round ram, and

anewly designed terminal

depressor. It still utilizes the

proven quality of the HD-M

crimper and anvil tooling.

AMP-TAPETRONIC Machine,

Part No. 69875 AMP-O-LECTRIC Model “K”

Terminating Machine with a

permanently-mounted

applicator that accepts

interchangeable die sets to

apply a variety of tape-

mounted terminals and

splices. Many of the die

sets can also be used in

AMP-O-LECTRIC

Terminating Machines with

atape applicator.

For more information, contact Tyco

Electronics.

AMP 3K/40 and AMP 5K/40

Terminating Machines

The AMP 3K/40 and AMP

5K/40 Terminators are

designed for customers that

require the increased

output and quality of a

semiautomatic machine at

acompetitive price. By

incorporating the most

commonly requested

features as standard and

offering a long list of

optional equipment, these

terminators offer flexibility to

meet the specific needs of

various applications at the

lowest possible cost.

103330

■3,000 lb [1361 kg] max.

crimp force (AMP 3K/40);

5,000 lb [2268 kg] max.

crimp force (AMP 5K/40)

■Toolless removal of

applicators and guards

■Jog capability

■Quiet, fast operation —

80/76 dBA and cycle time

less than 0.400 seconds

■Accepts Heavy Duty Mini

stye applicators

■Wide range of optional

equipment such as toolless

precision crimp height

adjust, batch counter, CQM

capability and work light

For more information, request

Catalog 1654956-2.

Note: New Stripping Module

available, see page 79.

Application Tooling

For more information, request Catalog

1654956-8

Application Tooling

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Application Tooling (Continued)

AMPOMATOR CLS IV+

Lead-Making Machines,

Part Nos. 356500-1, -2;

1213400-1, -2

Fully-automatic machines

that measure, cut, strip and

terminate single leads.

Microprocessor-controlled,

and programmed and

operated using an easy-to-

follow, menu-driven touch-

screen. Features include

direct-drive terminating

units with precision crimp

height adjustment, fully

programmable setups, wire

runout and splice detection,

and motorized pre-feed with

wire straightener. Crimp

quality monitoring is also

available.

For more information, request

Catalog 124324, Video 198142

(NTSC), 199609 (PAL).

The AMPOMATOR System III

Leadmaker is designed for

the demands of low-

volume/high mix

manufacturing and precision

quality. This leadmaker

combines the best wire

processing capabilities with

new technologies in terminal

feeding and machine set-up

found in the System III

Applicator to offer significant

advantages for higher

throughput and efficiencies.

See catalog 1654956-5 for more

information.

End-Feed Heavy-Duty

Miniature Applicators

(coded HDM)

Interchangeable applicators

for crimping products

reeled end-to-end (primarily

open-barrel terminals).

Used in bench and lead-

making machines; most

designs can be used, or

adapted for use with minor

tooling changes, dial-in set-

tings for different wire sizes

and insulation diameters.

Mechanical or air-powered

feed systems, depending

on the product applied.

For more information, request

Catalog 296393-2 and

Instruction Sheet 408-8039.

EDGE Applicator Counter

The new EDGE counter tracks

wearable tool usage for the

most effective maintenance

planning. The completely

electronic counter, with clear

LCD display, indicates cycles

since installation. By

performing maintenance at

measured intervals with pre-

set limits, operators avoid

breakdowns and rejects

caused by tool wear or mis-

adjustment. A wireless

interface transfers counters to

aPC running the optional

Edge Counter Software Pack.

The EDGE is standard on all

new applicators and can be

retrofitted to most existing

Tyco Electronics applicators.

See catalog 1773385 for more information.

Lead Makers

110234

Applicators

Komax 433-S alpha

Lead-Making Machine

The 433-S alpha offers

maximum flexibility for

applying seals to one or both

ends of the wire with the

corresponding terminal. When

equipped with the mci 711

crimp terminator and mci 761

seal applicator, the fully-

automated 433-S alpha forms

ahighly compact system with

optimum accessibility.

Dynamic servo-drives provide

fine travel settings on all motor

axes and the wire straightening

unit with quick-release lock and

automatic lead-in feature

reduces wire changeover time.

The TopWin software provides

for fast, simple data input.

For more information, request

Catalog 1307801.

Komax gamma 333 PC

Lead-Making Machine

AMPOMATOR System III

Leadmaker

This fully-automatic, PC-

controlled leadmaker can be

equipped with up to three

processing stations enabling

the crimping of both ends of

the wire, double-crimp

connections with three

different contacts, single-

ended seal applications,

tinning or ink-jet marking.

Features include ultra-short

conversions times, easy-to-

use graphic-based TopWin

interface with multiple-

language capability, crimp

force analyzer with statistical

analysis, seal monitoring, and

integrated good/bad sorting.

For more information, request

Catalog 1307901.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Application Tooling (Continued)

Stripper-Crimper

Applicators (coded SCA) Interchangeable applicators

for crimping products in

AMP-O-MATIC Stripper-

Crimper Machines. Consist

of separate ram and lower

tooling assemblies. Similar

dial-in settings for different

wire sizes and insulation

diameters as HDM

applicators. Available with

sensors for use with the

Crimp Quality Monitor.

For more information, request Catalog

65004 (AMP-O-MATIC Stripper-

Crimper Machines),Catalog 82275

[Crimp Quality Monitor (CQM)].

AMP-O-MATIC Stripper-

Crimper Machines,

Part Nos. 1320895-1, -2

Semiautomatic bench

crimping machines that also

strip the wire, and are there-

fore used for terminating

jacketed cable. Feature

manual precision adjust-

ment of crimp height, keyed

strip blades for faster, more

accurate setups, and an

efficient scrap removal sys-

tem. All adjustments can be

made from the front of the

machines without special

tools. Available with crimp

quality monitoring.

For more information, request

Catalog 65004,Video 198075,Catalog

82275 [Crimp Quality Monitor

(CQM)],Video 198094.

Stripper-Crimper Machines

Komax Delta 60

Wire Stripper

The semiautomatic Delta 60 is

designed to strip single- and

multiple-pole conductors with

pull-off lengths of .984 [25] or

3.78 [96]. Thanks to the

electric drive and non-

pneumatic design, the device

is quick and quiet in operation

and can be utilized virtually

anywhere. The Delta 60 can

desheath or strip stranded

conductors and multiple wire

cables with external diameters

of up to .433 [11].

See catalog 1654956 for more information.

Cosmic 927R Micro-Cable

Stripper

The compact, lightweight,

benchtop Cosmic 927R was

designed and developed to

reliably strip various insulation

materials and micro-cable.

From conductor diameter

36 to 10 AWG, the stripping

diameter display can be set to

within 0.1 mm increments.

See catalog 1773385-4 for more

information.

Cosmic 30M Wire Stripping

Machine, 5-528367-0

The Cosmic 30M is a high

precision, high speed

electrical wire stripper that is

very easy to operate. It’s

equipped with a four blade

system and an optional

gripper for more difficult wires.

There is a digital display for

the wire diameter that can be

set at 0.01 mm increments.

See catalog 1773385-2 for more

information.

89827

Stripping Module (for the

AMP 3K/40 and AMP 5K/40

Terminating Machines and

AMP-O-LECTRIC Model “G”

Terminator on page 77)

The combination of the

Stripping Module with the

AMP 3K/40 and AMP 5K/40

Terminating Machines or

the AMP-O-LECTRIC

Model “G” Terminator

provides an economic and

proficient method of

stripping the wire and

crimping terminals on the

same machine. The module

accepts End- and Side-

Feed HDM Applicators

(32-14 AWG) and operates

in three modes: crimp only,

strip only, or strip and

crimp. It can be installed

on existing machines in the

field or purchased as one

unit from the factory.

112075-2

For more information, request

Catalog 1309085.

Side-Feed Heavy-Duty

Miniature Applicators

(coded HDM)

Interchangeable applicators

for crimping products

reeled side-by-side on sin-

gle or dual carrier strips

(primarily closed-barrel ter-

minals and open-barrel con-

tacts). Similar design as the

end-feed version. All side-

feed applicators include a

wire stop to help correctly

position the wire end in the

crimping target area.

For more information, request

Catalog 296393-2 and

Instruction Sheet 408-8040.

89828

Application Tooling

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Technical Documents

Various technical documents are available for your use:

Product Specifications describe technical performance characteristics and verification tests. They are intended for

the Design, Component and Quality Engineer.

108-1579 Sealed CPC Connectors with Removable Contacts

108-2079 Miniature CPC Connectors

108-10024 CPC Connectors

108-10024-2 (Series 1)

108-10024-3 (Series 2)

108-10024-4 (Series 3 & 4)

108-10037 Contacts, Type XII

108-10040 Metal-Shell CPC Connectors

108-10042 Contacts, Type III +

108-40005 Contacts, Size 20 DF

Application Specifications describe requirements for using the product in its intended application and/or

crimping information. They are intended for the Packaging and Design Engineer and the Machine Setup Person.

114-10000 Contacts, Size 20 DF

114-10004 Contacts, Type III +

114-10005 Contacts, Type XII

114-10038 CPC Connectors

Instruction Sheets provide instructions for assembling or applying the product. They are intended for the

Manufacturing Assembler or Operator.

408-4317 Two-Piece Sealed CPC Connectors

408-6641 Metal-Shell CPC Connectors

408-7582 Accessories for CPC Connectors

408-7593 CPC Connectors

408-7901 Application and Maintenance for AMP Hand Crimp Tool

408-8416 CPC Right-Angle Cable Clamp Assembly

Tool Part No. Instruction Sheet

58495-1 408-9819

69710-1 408-2095

91019-3 408-7276

91067-2 408-7508

Tool Part No. Instruction Sheet

91285-1 408-9404

305183 408-1216

318813-1 408-4374

Application Tooling/Instruction Sheet Cross Reference

Technical Documents

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Part Number Index

Part Number Page

51565 22,23

54010 52

54011 52

54012 52,71

54123 52

66098 17

66099 17

66100 17

66101 17

66102 17

66103 17

66104 17

66105 17

66106 17

66107 17

66108 17

66109 17

66180 20

66181 20

66182 20

66183 20

66253 34

66254 34

66255 34

66256 34

66259 34

66260 34

66261 34

66262 34

66331 17

66332 17

66358 17,18

66359 17,18

66360 17,18

66361 17,18

66393 17

66394 17

66399 17

66400 17

66405 17

66406 17

66424 17

66425 17

66428 17

66429 17

66504 29

66505 29

66506 29

66507 29

66563 17,57

66564 17

66565 17,57

66566 17

66569 30

66570 30

66597 17,18

66598 17,18,57

66600 17

66601 17,18,57

66602 17,18

66740 34

66741 34

81665 44,48,49,50,51

164159 19

164160 19

164161 19

164162 19

164163 19

164164 19

193844 19

193846 19

193990 35

193991 35

200333 21

200336 21

200821 42

201328 21

201330 21

201332 21

201334 21

201568 21

201570 21

201578 21

201580 21

201611 21

201613 21

202236 20

202237 20

202410 21

202411 21

202507 21

202508 21

202725 21

202726 21

204219 21

205089 30

205090 30

205838 26,28

205839 26

205840 26

205841 26

205842 26

205843 26

206036 10,33,35,50

206037 10,14,16,33,35,50

206038 26

206039 26

206043 10,50

206044 10,15,50

206060 10,14,15,50

206061 10,50

206062 38

206070 38,48,49,56

206125 28

206126 28

206127 28

206136 33

206137 33

206138 38

206150 10,15,16,50

206151 10,50

206152 26

206153 10,50

206207 33

206226 33

206227 33

206304 53

206305 10,15,50

206306 10,50

206322 38,48,49,56

206358 38

206404 14

206425 33

206426 33

206429 10,15,50

206430 10,50

206433 26

206434 26

206437 26

206438 26

206455 27

206458 28

206460 28

206485 26

206486 26

206508 42

206509 42

206512 38,53

206516 14

206518 14

206552 14

206554 14

206612 37

206613 37

206705 10,50

206708 10,15,50

206837 10,15,16,50

206838 10,50

206852 27

206903 52

206934 12

206966 38

207008 38

207052 53

207055 40

207216 27

207241 41

207292 13

207299 40

207303 12

207369 27

207387 41

207445 52

207446 52

207485 37

207486 37

207489 41

207490 41

207597 42

207774 39

207825 12

207890 13

208130 10

208131 10,50

208132 12

208223 12

208224 13

208283 13

208337 44

208338 44

208457 59

208459 59

208470 59

208471 59

208472 60

208473 60

208474 63

208475 63

208476 62

208477 62

208478 68

208479 68

208480 68

208481 68

208482 65

208483 65

208484 66

208485 66

208486 60

208487 60

208488 59

208489 59

208490 62

208491 62

208492 63

208493 63

208494 65

208495 65

208496 66

208497 66

208652 52

208657 27

208680 52

208714 59

208715 59

208716 60

208717 60

208718 59

208719 59

208720 60

208721 60

208800 52

208945 71

211102 10

211103 10

211398 11

211399 11,15,16,50

211400 11,15

211401 11,50

211766 11,15

211767 11

211768 11,15

211769 11

211770 11,15

211771 11

211772 11,15

211773 11

211824 37

211825 37

211839 10

211870 52

211903 71

211904 71

212618 21

Note: This part number index lists

all cataloged parts by base number

only. Complete part numbers (with

prefixes and/or suffixes) are shown

on the pages indicated.

Part Number Page Part Number Page Part Number Page

Part Number Index

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Part Number Index (Continued)

213485 52

213570 56

213571 56

213581 33

213588 12

213603 57

213605 57

213650 56

213651 56

213652 56

213667 57

213668 57

213671 57

213729 13

213780 12

213781 13

213782 12

213798 12

213810 10,11,26,33,48,49

213811 10,26

213812 10,11,26,33,37

213813 10,11

213823 71

213825 13

213826 13

213827 13

213828 13

213841 47

213843 47

213845 47

213847 47

213848 10

213849 10

213850 10

213851 10

213852 11

213853 11

213854 12

213855 12

213856 13

213857 12

213858 13

213859 12

213860 10

213862 10

213864 10

213866 10

213868 11

213870 11

213889 48

213890 48

213893 49

213894 49

213899 48,51

213900 49,51

213902 48,49

213904 48,49

213905 48

213906 49

213919 51

213920 51

213925 51

213926 51

213933 52

213982 39

225088 22

226537 22,23

332056 22

332057 22,23

539972 19

745253 29

745254 29

770834 75

770835 75

770901 75

770902 75

770903 75

770904 75

770834 75

770985 75

770986 75

770987 75

770988 75

787610 10

788085 17

788088 17

788130 13

788153 44

788154 44

788155 44

788157 44

788158 44

788159 44

788188 45

788189 45

794058 75

795059 75

796075 44

796094 44

796095 44

796096 44

796112 45

796188 44

796190 44

796203 45

796207 45

796257 54

796260 54

796271 44

796272 44

796273 44

796274 44

796275 44

796276 44

796286 44

796287 44

796288 44

796291 44

796329 27

796330 45

796332 45

796348 15

796375 15

796379 39

796380 39

796381 39

796382 39

796387 15

796403 15

796404 15

796405 15

796406 15

796407 15

796409 15

796433 12

796435 15

796437 10

796439 11

796449 10

796450 11

796497 15

796500 15

796501 15

796502 15

796964 19

796966 19

969789 54

969803 54

969807 54

969809 54

969811 54

969813 54

969817 54

1445389 75

1445390 75

1445420 75

1445421 75

1445510 75

1445522 75

1445526 75

1445534 75

1445535 75

1445536 75

1445537 75

1445538 75

1445539 75

1445730 74

1445771 75

1445807 75

1445816 75

1445817 75

1445818 75

1445819 75

1445820 75

1445821 75

1445822 75

1445823 75

1445834 75

1445825 75

1445826 75

1445827 75

1445828 75

1445829 75

1445856 74

1445904 75

1546347 39

1546348 39

1546349 39

1546350 39

1546746 75

1546921 75

1546997 75

1604089 75

1604196 75

1658537 29

1658538 29

1658539 26

1658540 29

1658543 29

1658544 29

1776088 68

1776089 68

1776903 16

1776904 16

1776905 16

1776906 16

5019024 38

5066682 29

5066683 29

Part Number PagePart Number Page Part Number Page Part Number Page

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

AMP Circular Connectors for

Commercial Signal and Power Applications

Note: All part numbers

are RoHS Compliant.

Tooling Part Number Index

567066 75

567067 75

567363 17,57

567364 17,18,57

567418 75

567455 34

567801 29

567804 29

567834 57

567849 29

567867 17

567947 17

601966 30

601967 19,21,22

680114 19

680195 47

680197 47

680602 17

725840 19

1016002 29

1016015 29

1213400 78

1320420 77

1320895 79

1490076 76

1604816 75

356500 78

356611 47

356612 47

455830 75

466321 17

466323 17,19

466324 17

466325 17

466326 17,18

466383 17

466422 29

466423 29

466585 17

466598 17

466741 19

466758 29

466900 29

466901 29

466906 17

466907 17,19

466908 17

466923 17,18

466942 17

466958 17,18,57

466963 29

466968 29

466979 17

567021 34

567036 29

58448 29

58495 17,19,80

58541 21

69656 23

69690 23

69710 22,23,34,47,76,80

69875 21,77

90136 21

90140 34

90145 34

90225 17

90230 21

90231 21

90249 21

90250 21

90716 17

90717 75

90758 75

90759 75

90870 75

91002 17

91019 34,80

91067 80

91285 29,80

91503 29

91505 17,19

91515 17,19

91519 17,18

Part Number Page Part Number Page Part Number Page

91521 17,18, 57

91522 75

91523 17,19

91525 29

91529 75

91538 21

91539 21,22

91542 17,57

91549 29

91911 23

189721 17,18,19,21,22,

23,29,34,47,57

189722 17,18,19,21,22,

23,29,34,47,57

189727 75

189928 17,18,19,21,22,

23,29,34,47,57

200893 17,21

217201 17,18,19,29,57

224155 35

305183 17,19,20,21,22,23,57,80

318161 21,22,23,34,47

318813 47,80

354500 47,77

354940 23

356114 35

356119 35

356304 17,18,19,21,22,23,

29,34,47,57

Part Number Page

Cross Reference: Non-Compliant to RoHS Compliant Part Numbers

19024-1 5019024-1 38

19024-2 5019024-2 38

19024-3 5019024-3 38

19024-4 5019024-4 38

19024-5 5019024-5 38

45098 91539-1 21,22

66098-2 1-66098-9 17

66098-7 1-66098-8 17

66099-2 1-66099-5 17

66100-7 1-66100-9 17

66101-2 1-66101-9 17

66102-7 2-66102-5 17

66103-2 1-66103-8 17

66104-7 3-66104-0 17

2-66104-5 3-66104-0 17

66105-2 1-66105-9 17

66106-6 1-66106-5 17

66107-2 1-66107-1 17

66108-6 1-66108-5 17

66109-2 1-66109-7 17

66331-5 1-66331-4 17

66332-5 1-66332-4 17

66358-6 1-66358-6 17,18

1-66358-2 1-66358-8 17,18

1-66358-4 1-66358-6 17,18

2-66358-0 2-66358-1 17,18

66359-6 1-66359-4 17

1-66359-1 1-66359-5 17,18

1-66359-7 1-66359-9 17,18

66360-2 1-66360-2 17,18

1-66360-5 1-66360-6 17,18

66361-2 1-66361-2 17,18

1-66361-5 1-66361-6 17,18

66399-1 1-66399-0 17

66400-1 1-66400-0 17

66424-6 1-66424-1 17

66425-6 1-66425-2 17

5-66504-6 1658537-1 29

5-66504-7 1658537-2 29

5-66504-9 1658537-3 29

6-66504-0 1658537-4 29

5-66505-7 1658538-3 29

6-66505-0 1658538-2 29

6-66505-2 66505-9 29

2-66506-4 1658539-1 29

2-66506-5 1658539-2 29

5-66506-7 1658539-3 29

5-66506-9 1658539-4 29

3-66507-0 1658540-4 29

3-66507-1 1658540-1 29

5-66507-7 1658540-5 29

5-66507-9 1658540-2 29

66563-6 1-66563-1 17,57

66564-6 1-66564-2 17

66565-2 66565-7 17,57

66566-2 66566-7 17

66597-1 66597-8 17,18

66598-1 66598-9 17,18,57

66598-7 1-66598-0 17,18,57

1-66598-4

66601-1 66601-9 17,18,57

66602-1 66602-8 17,18

66682-6 5066682-6 29

66682-9 5066682-9 29

1-66682-1 66682-4 29

66683-7 5066683-7 29

1-66683-0 1-5066683-0 29

202236-1 202236-7 20

202236-2 202236-5 20

202237-1 202237-7 20

202237-2 202237-5 20

206062-3 1-206062-4 38

206062-4 1-206062-7 38

206070-1 206070-8 38,48,49,56

206070-3 1-206070-0 38,48,49,56

206138-1 206138-8 38

206138-2 1-206138-0 38

206322-1 206322-9 38,48,49,56

206322-2 1-206322-0 38,48,49,56

206358-1 206358-5 38

206358-2 206358-6 38

206455-1 1-206455-1 27

206455-2 1-206455-2 27

206512-1 206512-5 38,53

206512-2 206512-6 38,53

206852-1 1-206852-1 27

206852-2 1-206852-2 27

206934-1 1-206934-1 12

206934-6 1-206934-8 12

206934-7 1-206934-9 12

206934-9 1-206934-7 12

206966-1 206966-7 38

206966-2 206966-9 38

207008-1 207008-5 38

207008-2 207008-6 38

207216-2 1-207216-6 27

207216-8 1-207216-7 27

207303-1 1-207303-5 12

207303-3 1-207303-3 12

1-207303-1 1-207303-4 12

207369-1 1-207369-1 27

207369-3 1-207369-3 27

207774-1 207774-3 39

207774-2 207774-4 39

207825-1 207825-9 12

207890-1 207890-2 13

208132-1 208132-2 12

208223-1 208223-9 12

208223-3 1-208223-0 12

208224-1 2-208224-1 13

208224-2 1-208224-2 13

208283-1 208283-4 13

208657-1 1-208657-1 27

208657-5 1-208657-0 27

213588-1 213588-2 12

213603-1 213603-5 57

213603-2 213603-6 57

213605-1 213605-7 57

213729-1 213729-9 13

213729-2 213729-6 13

213729-4 213729-8 13

213780-1 213780-2 12

213781-1 213781-9 13

213782-1 213782-4 12

213798-1 213798-3 12

213825-1 1-213825-7 13

213826-1 1-213826-1 13

213827-1 213827-8 13

213828-1 1-213828-6 13

213854-1 213854-3 12

213855-1 213855-4 12

213855-2 213855-3 12

213856-1 213856-4 13

213857-1 213857-2 12

213858-1 213858-3 13

213859-1 213859-2 12

213902-1 213902-3 48,49

213904-1 213904-3 48,49

225088-1 5-225088-1 22

225088-3 5-225088-3 22

466598-1 466598-2 17

1-745253-1 1658543-3 29

1-745253-3 1-745253-6 29

1-745253-4 1658543-2 29

1-745253-6 1658543-1 29

1-745254-1 1658544-3 29

1-745254-3 1-745254-6 29

1-745254-4 1658544-2 29

1-745254-6 1658544-1 29

770834-3 1-770834-0 75

770834-6 1-770834-1 75

770835-3 1-770835-0 75

770901-3 1-770901-0 75

770902-3 1-770902-0 75

770902-6 1-770902-1 75

770903-3 1-770903-0 75

770904-3 1-770904-0 75

770904-6 1-770904-1 75

770985-3 1-770985-0 75

770986-3 1-770986-0 75

770987-3 1-770987-0 75

770988-3 1-770988-0 75

788130-1 1-788130-1 13

794058-3 1-794058-0 75

794059-3 1-794059-0 75

796329-1 1-796329-1 27

796348-1 796348-2 16

796375-1 1-796375-1 16

796375-2 1-796375-2 16

796379-1 796379-2 39

796380-1 796380-2 39

796381-1 796381-2 39

796382-1 796382-2 39

796387-1 1-796387-1 16

796387-2 1-796387-2 16

796403-1 1-796403-1 16

796403-2 1-796403-2 16

796404-1 1-796404-1 16

796405-1 1-796405-1 16

796406-1 1-796406-1 16

796407-1 1-796407-1 16

796409-1 1-796409-1 16

796433-1 1-796433-1 12

796435-1 1-796435-1 16

796435-2 1-796435-2 16

796497-1 1-796497-1 16

796500-1 1-796500-1 16

796501-1 1-796501-1 16

796502-1 1-796502-1 16

1490076-1 1490076-2 76

1546347-1 1546347-2 39

1546348-1 1546348-2 39

1546349-1 1546349-2 39

1546350-1 1546350-2 39

1546746-1 1546746-3 75

1546746-2 1546746-4 75

Non- RoHS

Compliant Compliant Page

Part No. Part No.

Non- RoHS

Compliant Compliant Page

Part No. Part No.

Non- RoHS

Compliant Compliant Page

Part No. Part No.

Non- RoHS

Compliant Compliant Page

Part No. Part No.

Part Number Index

Circular Connectors for

Commercial Signal and Power Applications

Printed in the U.S.A. Tyco Electronics Corporation

www.tycoelectronics.com

Global Contacts

Americas

Asia/Pacific

Argentina –Buenos Aires

Phone: +54-11-4733-2200

Fax: +54-11-4733-2211

Brasil –São Paulo

Phone: +55-11-3611-1311

Fax: +55-11-3611-0397

Canada –Toronto

Phone: +905-475-6222

Fax: +905-474-5520

Product Information Center:

(Technical Support)

Phone: +905-470-4425

Fax: +905-474-5525

Colombia –Bogota

Phone: +57-1-231-9398

Fax: +57-1-660-0206

Mexico –Mexico City

Phone: +52-55-1106-0800

+01-800-733-8926

Fax: +52-55-1106-0901

United States –Harrisburg, PA

Phone: +717-564-0100

Fax: +717-986-7575

Product Information Center:

(Technical Support)

Phone: +800-522-6752

Fax: +717-986-7575

Australia –Sydney

Phone: +61-2-9554-2600

Fax: +61-2-9502-2556

Product Information Center:

(Technical Support)

Phone: +61-2-9840-8200

Fax: +61-2-9634-6188

India –Bangalore

Phone: +91-80-285-40800

Fax: +91-80-285-40820

Indonesia –Jakarta

Phone: +65-6482-0311

Fax: +65-6482-1012

Japan –Toyko

Phone: +81-44-844-8111

Fax: +81-44-812-3207

Raychem & Identification Products

Phone: +81-44-844-8183

Fax: +81-44-844-8184

Product Information Center:

(Technical Support)

Phone: +81-44-844-8013

Fax: +81-44-812-3200

Korea –Seoul

Phone: +82-2-3415-4500

Fax: +82-2-3486-3810

Malaysia –Kuala Lumpur

Phone: +60-3-78053055

Fax: +60-3-78053066

New Zealand –Auckland

Phone: +64-9-634-4580

Fax: +64-9-634-4586

Philippines –Makati City

Phone: +632-848-0171

Fax: +632-867-8661

People’s Republic of China

Hong Kong

Phone: +852-2735-1628

Fax: +852-2735-0243

Shanghai

Phone: +86-21-2407-1588

Fax: +86-21-2407-1599

Taiwan – Taipei

Phone: +886-2-8768-2788

Fax: +886-2-8768-2268

Singapore –Singapore

Phone: +65-6482-0311

Fax: +65-6482-1012

Raychem Products

Phone: +65-4866-151

Fax: +65-6545-514

Identification Products

Phone: +65 (0) 6482-0311

Fax: +65 (0) 6481-5514

Thailand –Bangkok

Phone: +66-2-955-0500

Fax: +66-2-955-0505

Vietnam and Indochina –

Ho Chi Minh City

Phone: +84-8 930-5546

Fax: +84-8 930-3443

For Latin/South American

Countries not shown

Phone: +54-11-4733-2015

Fax: +54-11-4733-2083

Europe/Middle East/Africa

Austria –Vienna

Phone: +43-1 90 5 60-0

Fax: +43-1 90 5 60-1333

Belgium –Kessel-Lo

Phone: +32-16-35-23-00

Fax: +32-16-35-23-52

Bulgaria –Sofia

Phone: +359-2-971-2152

Fax: +359-2-971-2153

Czech Republic –Kurim

Phone: +420-5-41-162-111

Fax: +420-5-41-162-223

Denmark –Glostrup

Phone: +45-43-480-452

Fax: +45-43-441-414

Egypt –Cairo

Phone: +20-2-29 04 281

Fax: +20-2-41 92 334

Estonia –Tartu

Phone: +372-5138-274

Fax: +372-7400-779

Finland –Helsinki

Phone: +358-95-12-34-20

Fax: +358-95-12-34-250

France –Cergy-Pontoise

Phone: +33-1-3420-8888

Fax: +33-1-3420-8600

Product Information Center:

(Technical Support)

Phone: +33-1-3420-8943

Fax: +33-1-3420-8623

Germany –Bensheim

Phone: +49-6251-133-0

Fax: +49-6251-133-1600

Product Information Center:

(Technical Support)

Phone: +49-6251-133-1999

Fax: +49-6251-133-1988

Germany –Langen

Phone: +49-6103-709-0

Fax: +49-6103-709-1223

Germany –Speyer

Phone: +49-6232-30-0

Fax: +49-6232-30-2243

Germany - HTS Division –Neunkirchen

Phone: +49-2247-305-0

Fax: +49-2247-305-122

Greece –Athens

Phone: +30-210-9370-396/397

Fax: +30-210-9370-655

Hungary –Budapest

Phone: +36-1-289-1000

Fax: +36-1-289-1010

Ireland –Dublin

Phone: +353-1-820-3000

Fax: +353-1-820-9790

Israel –Yokneam

Phone: +972-4-959-0508

Fax: +972-4-959-0506

Italy –Collegno (Torino)

Phone: +39-011-4012-111

Fax: +39-011-4031116

Lithuania –Vilnius

Phone: +370-5-2131-402

Fax: +370-5-2131-403

Netherlands –’s-Hertogenbosch

Phone: +31-73-624-62-46

Fax: +31-73-621-23-65

Product Information Center:

(Technical Support)

Phone: +31-73-6246-999

Fax: +31-73-6246-998

Norway –Nesbru

Phone: +47-66-77-8886

Fax: +47-66-77-8855

Poland –Warsaw

Phone: +48-22-45-76-700

Fax: +48-22-45-76-720

Romania –Bucharest

Phone: +40-21-311-3479/3596

Fax: +40-21-312-0574

Russia –Moscow

Phone: +7-495-926-5506/07/08/09

Fax: +7-495-926-5505

Russia –St. Petersburg

Phone: +7-812-718-8192

Fax: +7-812-718-8193

Slovenia –Ljubljana

Phone: +386-1561-3270

Fax: +386-1561-3240

South Africa –Port Elizabeth

Phone: +2741-503-4500

Fax: +2741-581-0440

Spain –Barcelona

Phone: +34-93-291-0330

Fax: +34-93-201-7879

Product Information Center:

(Technical Support):

Phone: +34-93-291-0330

Fax: +34-93-200-3779

Sweden –Upplands Väsby

Phone: +46-8-50-72-50-00

Fax: +46-8-50-72-50-01

Switzerland –Steinach

Phone: +41-71-447-0447

Fax: +41-71-447-0444

Turkey –Istanbul

Phone: +90-212-281-8181/2/3

Fax: +90-212-281-8184

Ukraine –Kiev

Phone: +380-044-206-2265

Fax: +380-044-206-2264

United Kingdom –Swindon

Phone: +44-8706-080-208

Fax: +44-1793-572-109

Product Information Center:

(Technical Support)

Freephone GB: 0800-267-666

Phone: +44-208-420-8341 or 8343

+44-208-420-8081

United Kingdom –Raychem &

Identification Products

Phone: +44-1793-528171

Fax: +44-1793-572-516

For Middle East/African Countries Not

Shown

Phone: +33-1-3420-8866

Fax: +33-1-3420-8300

AMP Circular Connectors

for Commercial Signal &

Power Applications

RoHS

Ready

Tyco Electronics Corporation

Harrisburg, PA

tycoelectronics.com

82021-XXX-MS-FP-Rev. 6-07 OG3B