G3R-ODX02SN-UTU DC5-24 - OMRON

204

Solid-state Relay G3R-I/O

Compact SSRs for I/O Interface with

High Dielectric Strength Requirements

High-speed

models with optimum input ratings for a

variety of sensors are available.

Input Modules and Output Modules that can be

used for the G2R are available.

Using a coupler approved by VDE 0884 and

assuring an I/O dielectric strength of 4 kV.

Incorporating an easy-to-see monitoring indicator.

Approved

by UL, CSA,

and TÜV with -UTU V

ersion.

RCE

Ordering Information

Input Module

Isolation Indicator Response

speed Logic level

Rated input

Model

Supply voltage

Supply current

voltage

Photocoupler Yes ---

4 to 32 VDC

0.1 to 100 mA 100 to 240 V

AC G3R-IAZR1SN

High-speed

(1 kH )

5 VDC G3R-IDZR1SN

g s eed

(1 kHz)

12 to 24 VDC

Low-speed

(10 H )

5 VDC G3R-IDZR1SN-1

o s eed

(10 Hz)

12 to 24 VDC

Output Module

Isolation Indicator Zero

cross

function

Applicable output

load

Rated input

Model

Phototriac Yes Yes

2 A at 75 to 264 V

5 to 24 VDC

G3R-OA202SZN

No G3R-OA202SLN

Photocoupler ---

2 A at 4 to 60 VDC

G3R-ODX02SN

1.5 A at 40 to 200

VDC G3R-OD201SN

Note:

When ordering a TÜV approved model, add “-UTU” to the model number as shown below:

Example: G3R-OA202SZN-UTU.

Accessories (Order Separately)

Track/Surface Mounting Sockets

Model Number

of poles

P2RF-05-E

1 pole (G2R: 1 pole usage)

Connecting Socket Attaching Plate

Model Applicable

Socket

P2R-P P2R-05A

G3R-I/O G3R-I/O

205

I/O Indication

I/O

module classification and AC/DC use are indicated on the mark

affixed

to the top of the product.

Mark indication

Specification

AC IN

Input module, AC input

DC IN

Input module, DC input

AC OUT

Output module, AC output

DC OUT

Output module, DC output

Mark attached to the top of the product

Specifications

Ratings

Input Module

Input

Model Rated

voltage

Operating voltage

Input current

Must operate

voltage

Must release

voltage

G3R-IAZR1SN

100 to 240 V

60 to 264 V

15 mA max.

60 V

AC max.

20 V

AC min.

G3R-IDZR1SN 5 VDC

4 to 6 VDC

8 mA max.

4 VDC max.

1 VDC min.

12 to 24 VDC 6.6 to 32 VDC

6.6 VDC max.

3.6 VDC min.

G3R-IDZR1SN-1 5 VDC

4 to 6 VDC

4 VDC max.

1 VDC min.

12 to 24 VDC 6.6 to 32 VDC

6.6 VDC max.

3.6 VDC min.

Output

Model

Logic level supply voltage

Logic level supply current

G3R-IAZR1SN

4 to 32 VDC

0.1 to 100 mA

G3R-IDZR1SN

G3R-IDZR1SN-1

Output Module

Input

Model Rated

voltage

Operating voltage

Input current

Must operate

voltage

Must release

voltage

G3R-OA202SZN

5 to 24 VDC 4 to 32 VDC

15 mA max.

(t25

°C)

4 VDC max.

1 VDC min.

G3R-OA202SLN

(at 25

°C)

G3R-ODX02SN

8 mA max.

G3R-OD201SN

Output

Model

Load voltage

Load current (see note)

Inrush current

G3R-OA202SZN

75 to 264 V

0.05 to 2 A

30 A (60 Hz, 1 cycle)

G3R-OA202SLN

G3R-ODX02SN

4 to 60 VDC

0.01 to 2 A

8 A (10 ms)

G3R-OD201SN

40 to 200 VDC

0.01 to 1.5 A

8 A (10 ms)

Note:

The minimum current value is measured at 10

C min.

G3R-I/O G3R-I/O

206

Characteristics

Input Module

Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1

Operate

time

20 ms max.

0.1 ms max.

15 ms max.

Release time

20 ms max.

0.1 ms max.

15 ms max.

Response frequency

10 Hz 1 kHz 10 Hz

Output ON voltage drop

1.6 V max.

Leakage current

A max.

Insulation resistance

100 M

Ω

min. between input and output

Dielectric strength

4,000 V

AC, 50/60 Hz for 1 min between input and output

ibration resistance

10 to 55 Hz, 1.5-mm double amplitude

Shock resistance

1,000 m/s

Ambient temperature

Operating: –30°

C to 80

C (with no icing)

Storage: –30°

C to 100

C (with no icing)

Approved standards

UL508 File No. E64562

CSA C22.2 (No. 14, No. 950) File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity

Operating: 45% to 85%

Weight

Approx. 18 g

Output Module

Item G3R-OA202SZN G3R-OA202SLN G3R-ODX025N G3R-OA201SN

Operate

time

1/2 of load power source cycle + 1 ms max.

1 ms max.

Release time

1/2 of load power source cycle + 1 ms max.

2 ms max.

Response frequency

20 Hz 100 kHz

Output ON voltage drop

1.6 V max. 2.5 V max.

Leakage current

1.5 mA max.

1 mA max.

Insulation resistance

100 M

Ω

min. between input and output

Dielectric strength

4,000 V

AC, 50/60 Hz for 1 min between input and output

ibration resistance

10 to 55 Hz, 1.5-mm double amplitude

Shock resistance

1,000 m/s

Ambient temperature

Operating: –30°

C to 80

C (with no icing)

Storage: –30°

C to 100

C (with no icing)

Approved standards

UL508 File No. E64562

CSA C22.2 (No. 14, No. 950) File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity

Operating: 45% to 85%

Weight

Approx. 18 g

G3R-I/O G3R-I/O

207

Engineering Data

1.5

–30

0.7

0.5

–20 0 20 30 40 55 60 80 100

1.5

0.5

–30 –20 0 20 40 55 60 80 100 –30 –20 0 20 40 55 60 80 100

1.5

0.5

0.6

4-point mounting (see note 1)

16-point mounting (see note 2)

4-point mounting (see note 1)

16-point mounting (see note 2) 4-point mounting (see note 1)

16-point mounting

(see note 2)

10 30 50 100 200 500 1000 5000

010 30 50 100 500 1000 2000

010 30 50 100 500 1000 2000300 300

Load Current vs. Ambient Temperature

Characteristics

G3R-OA202SZN/OA202SLN G3R-OD201SN

(40 to 200 V

AC)G3R-ODX02SN (4 to 60 VDC)

Ambient temperature (

°C)

Load current (A)

Ambient temperature (

°C)

Load current (A)

Ambient temperature (

°C)

Load current (A)

Inrush Current Resistivity

Non-repetitive

(Keep the inrush current to half the rated value if it occurs repetitively

G3R-OA202SZN/OA202SLN G3R-OD201SNG3R-ODX02SN

Inrush current (A)

Energizing time (ms)

Inrush current (A)

Energizing time (ms)

Inrush current (A)

Energizing time (ms)

Single-point

mounting

1.4 1.4 Single-point

mounting 1.1 Single-point

mounting

Note: 1.

When G730-Z0M04-B is mounted.

When G70A-Z0C16 is mounted.

Operation

Precaution of Mounting Output Modules

ÉÉ

ÉÉÉÉ

ÉÉ

G3R G3R G3R

With

up to four G3R SSRs mounted closely and

side by side, 2-A loads can be switched. With a G3R SSRs mounted every other slot,

2-A loads can be switched.

G3R-I/O G3R-I/O

208

Dimensions

Note:

All units are in millimeters unless otherwise indicated.

(+)

(–)

Load

Input

max.

28 max. 5 7.5

9.6

220

1 5

(–) (+)

0.5

5.2

17.4

4.7

4.75

0.5

Terminal

Arrangement/

Internal Connections

(Bottom View)

G3R

max.

Connecting Sockets

Connecting

Socket Attaching Plates

P2RF-05

71.5

max.

19.5 max.

54 max.

30 max.

4 dia.

4.2-dia. hole

M3 (M3 x16) or

3.2-dia. hole

P2RF-05 Socket

G3RZ Relay

58.5 *

* Indicates a value when using the PFP-jN

Supporting Rail.

The value is 67.5 when using the PFP-jN2.

P2RF-05-E PFRF-05-E

Socket

G3RZ Relay

62.5 **

(66.5)***

** Indicates a value when using the PFP-jN

Supporting Rail with the P2RF-05-E

The value is 71.5 when using the PFP-jN2.

*** Indicates a value when using the PFP-jN

Supporting Rail with the P2RF-08-E

The value is 75.5 when using the PFP-jN2.

3.2-dia. hole

M3 or 3.5-dia. hole

59 max.

48 max.

M3.5 screw

3.5-dia.

hole

85.5 max.

61 max.

P2R-05A

14.5 max.

35.5 max.

Five, 3x1.5-dia. hole

G3RZ Relay

P2R-05A Socket

36 max.

(Panel thickness must

be 1.6 to 2.0 mm.)

G3R-I/O G3R-I/O

209

P2R-05P

Dimensional tolerance is ±0.1.

G3RZ Relay

P2R-05P Socket

Five, 1.6-dia. hole

35.5 max.

14.5 max.

36 max.

P2R-057P G3RZ Relay

P2R-057P Socket

Five, 1.6-dia. hole

14 max.

32 max.

41 max.

Socket Mounting Plate

Use

the Socket Mounting Plate when arranging several Sockets in a row

R2.25

10 ellipses

Square hole

G3R-I/O G3R-I/O

210

G70A I/O Block Base

Ordering Information

Classification Internal

I/O circuit common

Rated voltage

Model

Output

NPN (+ common)

24 VDC G70A-ZOC16-3

PNP (– common)

24 VDC G70A-ZOC16-4

Input NPN/PNP 1

10 VDC max., 240 V

AC max.

(see note)

G70A-ZIM16-5

Note:

Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.

Dimensions

Note: All

units are in millimeters unless otherwise indicated.

G70A-ZOC16 (Output)

G70A-ZIM16 (Input)

234

10.2

9.2 19.6

M3.5

48.7

20.7

34.2

234

20.7

34.2

48.7

9.2 19.6

28.6

M3.5

35.3+0.2

–0

35.3+0.2

–0

G3R-I/O G3R-I/O

211

Installation

Terminal Arrangement/Internal Connection

G70A-ZOC16-3 (NPN)

Connector Terminal

Arrangement

(Top View)

–

G70A-ZOC16-4 (PNP)

Connector Terminal

Arrangement

(Top View)

–

G3R-I/O G3R-I/O

212

G70A-ZIM16-5 (NPN/PNP)

Connector Terminal

Arrangement

(Top View)

COM. 1A2 2A2 3A2 4A2 5A2 6A2 7A2 8A2 9A2 10A2 11A2 12A2 13A2 14A2 15A2 16A2

9A1 10A1 11A1 12A1 13A1 14A1 15A1 16A15A1 6A1 7A1 8A11A1 2A1 3A1 4A1

–

Precautions

Refer

to pages

1 to

19 for general precautions.

Connection

With

the SSR for DC switching, the load can be connected to either

positive

or negative output terminal of the SSR.

Protective Element

Since the SSR does not incorporate an overvoltage absorption

component,

be sure to connect an

overvoltage absorption compo

nent

when using the SSR under an inductive load.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

convert millimeters into inches, multiply by 0.03937. T

o convert grams into ounces, multiply by 0.03527.

Cat. No. K091-E1-1A