CWDM Wavelengths Gigabit Ethernet Singlemode DFB Transceiver - 5LV9DE AC or DC Coupled Rx Output MRTRLSCD010-5LV9xE Features * CWDM DFB Laser * For Singlemode Applications * Data rate to 1.25 Gbps * Low power consumption * Single Power Supply * Available with SC Connector Absolute Maximum Ratings Parameter Symbol Supply Voltage Vcc Output Current Io Operating Temp (case) Storage Temp Lead Soldering Temp/Time Grounding Post Temp/Time Rating 5.25 50 0 to +70 -40 to +85 240/6 300/10 Laser Transmitter Specifications (Tc = 25C) Parameter Symbol Wavelength (0 to +70C) Spectral Width (RMS) Extinction Ratio Data Rate Supply Voltage Vcc Supply Current Icc Power Dissipation P Input High Voltage Input Low Voltage Rise Time (10%-90%) Fall Time (90%-10%) Random Jitter Duty Cycle Distortion Data Dependent Jitter Eye Diagram VIHS VILS tr tf Unit V mA C C C/S C/S Min c - 6.5 10 4.75 Vcc-1.16 Vcc-1.82 - Typ c 5.0 - Unit nm nm dB Mbps V mA mW V V ns ns ns(p-p) ns(p-p) ns(p-p) Max c + 6.5 0.2 1250 5.25 140 700 Vcc-0.89 Vcc-1.48 0.5 0.5 0.1 0.1 0.1 IEEE-802.3 Compliant Laser Transmitter Average Output Power ( T= 0C To 70C, 50% Duty Cycle ) Part Number Singlemode Min Unit Min Max D010 1.0 mW 0 3.0 Max +5.2 Unit dBm (nm) c6 NOTE: * Meets 802.3 Gigabit Ethernet spec. c Wavelength Guide Part number c Identification -xx 31 1311 33 1331 35 1351 37 1371 Unit nm nm nm nm Part number Identification -xx 39 41 43 45 c Unit 1391 1411 1431 1451 nm nm nm nm Part number Identification -xx 47 49 51 53 c Unit 1471 1491 1511 1531 nm nm nm nm Part number Identification -xx 55 57 59 61 c Unit 1551 1571 1591 1611 nm nm nm nm CWDM Wavelengths Gigabit Ethernet Singlemode DFB Transceiver - 5LV9DE AC or DC Coupled Rx Output MRTRLSCD010-5LV9xE Receiver Specifications (Tc = 25C) Parameter Wavelength Average Optical Sensitivity Average Max Input Power Data Rate Supply Voltage Supply Current Power Dissipation Output High Voltage Output Low Voltage Signal Detect Load Rise Time, Fall Time Signal Detect Threshold-Assertion Signal Detect Threshold -Deassertion Data dependent Jitter Hysteresis Duty Cycle Distortion Signal Detect Timing-Assertion Signal Detect Timing-Deassertion Symbol Min 1200 -24.0 4.75 Vcc-1.03 Vcc-1.82 5 -31 2.0 - Vcc Icc P VOH VOL trtf Outline Drawing Typ - Max 1625 -3 1250 5.25 125 630 Vcc-0.89 Vcc-1.63 0.5 -24.0 0.1 0.1 100 100 5.0 110 550 - Unit nm dBm dBm Mbps V mA mW V V K ns dBm dBm ns dB ns(p-p) s s Pinout Diagram 0.80 0.375 0.015 0.08 0.010 0.10 0.88 1.77 0.04 2 PLACES 0.170 0.80 0.98 0.125 0.10 0.80 8 SPACES AT 0.10 EACH 0.09 0.01 1.01 10K Notes: 1. L is a ferrite bead; Fair-Rite Products Corp., part number 2743002111 or equivalent. 2. Class 1 device. This product conforms to the applicable requirements of 21 CFR1040 at the date of manufacture (CDRH). This product also meets the requirements of EN 60950 and EN 60825 (TUV). Applicable to devices with maximum output of 1mW. 3. Pin 2 and 3 are internally terminated through 390 Ohm resistors. If the load impedance is not 50 Ohms use the termination as shown. The outputs as these pins are AC-coupled. (for AC-coupled version only). 4. Transmit pins 7 and 8 are AC - coupled and terminated through 50 Ohm resistors. Ordering Information MR TR L SCD 010 - 5LD9xE D=DC-Coupled A=AC-Coupled Transceiver Laser SC Interface Output Power CWDM Wavelengths Gigabit Ethernet Singlemode DFB Transceiver - 5LV9DE AC or DC Coupled Rx Output MRTRLSCD010-5LV9xE Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Luminent's sole and absolute discretion. Luminent warrants performance of its products to current specifications only in accordance with the company's standard one-year warranty; however, specifications designated as "preliminary" are given to describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of Sale for further warranty information. Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. Customer agrees that Luminent is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. (c) Luminent, Inc. 2002 All rights reserved 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 * LUMINENTINC.COM LUMNDS161-0402