MRTRLSCDλλ010-5LV9xE
CWDM Wavelengths Gigabit Ethernet Singlemode DFB
Transceiver - 5LV9DE AC or DC Coupled Rx Output
Absolute Maximum Ratings
Symbol
Vcc
Io
Rating
5.25
50
0 to +70
-40 to +85
240/6
300/10
Unit
V
mA
ºC
ºC
ºC/S
ºC/S
Parameter
Supply Voltage
Output Current
Operating Temp (case)
Storage Temp
Lead Soldering Temp/Time
Grounding Post Temp/Time
Laser Transmitter Specifications (Tc = 25ºC)
Parameter
Wavelength
Spectral Width
Extinction Ratio
Data Rate
Supply Voltage
Supply Current
Power Dissipation
Input High Voltage
Input Low Voltage
Rise Time (10%-90%)
Fall Time (90%-10%)
Random Jitter
Duty Cycle Distortion
Data Dependent Jitter
Eye Diagram
Symbol
λ (0 to +70ºC)
λ(RMS)
Vcc
Icc
P
VIHS
VILS
tr
tf
Min
λc - 6.5
-
10
-
4.75
-
-
Vcc-1.16
Vcc-1.82
-
-
-
-
-
Typ
λc
-
-
-
5.0
-
-
-
-
-
-
-
-
-
Max
λc + 6.5
0.2
-
1250
5.25
140
700
Vcc-0.89
Vcc-1.48
0.5
0.5
0.1
0.1
0.1
Unit
nm
nm
dB
Mbps
V
mA
mW
V
V
ns
ns
ns(p-p)
ns(p-p)
ns(p-p)
Features
• CWDM DFB Laser
• For Singlemode Applications
• Data rate to 1.25 Gbps
• Low power consumption
• Single Power Supply
• Available with SC Connector
λc Wavelength Guide
Part number
Identification -xx
31
33
35
37
λc
1311
1331
1351
1371
Unit
nm
nm
nm
nm
Part number
Identification -xx
39
41
43
45
λc
1391
1411
1431
1451
Unit
nm
nm
nm
nm
Part number
Identification -xx
47
49
51
53
λc
1471
1491
1511
1531
Unit
nm
nm
nm
nm
Part number
Identification -xx
55
57
59
61
λc
1551
1571
1591
1611
Unit
nm
nm
nm
nm
Laser Transmitter Average Output Power ( T= 0ºC To 70ºC, 50% Duty Cycle )
Part Number Singlemode
Dλλ010
Min
1.0
Max
3.0
Unit
mW
Min
0
Max
+5.2
Unit
dBm
λ (nm)
λc±6
IEEE-802.3 Compliant
NOTE: * Meets 802.3 Gigabit Ethernet spec.
∆
MRTRLSCDλλ010-5LV9xE
CWDM Wavelengths Gigabit Ethernet Singlemode DFB
Transceiver - 5LV9DE AC or DC Coupled Rx Output
Outline Drawing
Receiver Specifications (Tc = 25ºC)
Parameter
Wavelength
Average Optical Sensitivity
Average Max Input Power
Data Rate
Supply Voltage
Supply Current
Power Dissipation
Output High Voltage
Output Low Voltage
Signal Detect Load
Rise Time, Fall Time
Signal Detect Threshold-Assertion
Signal Detect Threshold -Deassertion
Data dependent Jitter
Hysteresis
Duty Cycle Distortion
Signal Detect Timing-Assertion
Signal Detect Timing-Deassertion
Symbol
λ
Vcc
Icc
P
VOH
VOL
trtf
Min
1200
-24.0
-
-
4.75
-
-
Vcc-1.03
Vcc-1.82
5
-
-
-31
-
2.0
-
-
-
Typ
-
Max
1625
-
-3
1250
5.25
125
630
Vcc-0.89
Vcc-1.63
-
0.5
-24.0
-
0.1
-
0.1
100
100
Unit
nm
dBm
dBm
Mbps
V
mA
mW
V
V
KΩ
ns
dBm
dBm
ns
dB
ns(p-p)
µs
µs
Pinout Diagram
Notes:
1. L is a ferrite bead; Fair-Rite Products Corp., part number 2743002111 or equivalent.
2. Class 1 device. This product conforms to the applicable requirements of 21 CFR1040 at the date of manufacture (CDRH). This product also meets the requirements of EN 60950
and EN 60825 (TUV). Applicable to devices with maximum output of 1mW.
3. Pin 2 and 3 are internally terminated through 390 Ohm resistors. If the load impedance is not 50 Ohms use the termination as shown. The outputs as these pins are AC-coupled.
(for AC-coupled version only).
4. Transmit pins 7 and 8 are AC – coupled and terminated through 50 Ohm resistors.
Ordering Information
MR TR L SCD λλ 010 - 5LD9xE
Transceiver
Laser Output Power
SC Interface
5.0
110
550
-
-
-
-
-
-
-
-
-
-
-
A=AC-Coupled
D=DC-Coupled
0.98
0.010
0.015
0.170
0.01
0.125
1.77
1.01
0.88
0.80
0.09
0.80
8 SPACES
AT 0.10 EACH
0.10
0.80
0.08
0.10
0.04 2 PLACES
0.375
10K Ω
-
-
-
MRTRLSCDλλ010-5LV9xE
CWDM Wavelengths Gigabit Ethernet Singlemode DFB
Transceiver - 5LV9DE AC or DC Coupled Rx Output
LUMNDS161-0402
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 • LUMINENTINC.COM
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines
according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Luminent’s sole and absolute discretion. Luminent warrants performance of its products to
current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components
only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a
particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information.
Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described
herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties
that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in
implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such
applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to
obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© Luminent, Inc. 2002
All rights reserved
Warnings
Legal Notice
