IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, with Base Connection FEATURES A/C 1 6 B C/A 2 5 C * Built-in reverse polarity input protection NC 3 4 E * Improved CTR symmetry * AC or polarity insensitive inputs * Industry standard DIP package * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 A 1 8 E C 2 7 C A 3 6 C C 4 5 E APPLICATIONS * Ideal for AC signal detection and monitoring AGENCY APPROVALS * UL1577, file no. E52744, double protection i179037-1 * cUL tested to CSA 22.2 bulletin 5A DESCRIPTION * CSA 93751 The IL250, IL251, IL252, ILD252 are bidirectional input optically coupled isolators consisting of two gallium arsenide infrared LEDs coupled to a silicon NPN phototransistor per channel. * BSI EN 60950, BSI EN 60065 * DIN EN 60747-5-5 (VDE 0884-5) * CQC GB4943.1-2011 and GB8898-2011 (suitable for installation altitude below 2000 m) The IL250 has a minimum CTR of 50 %, the IL251 has a minimum CTR of 20 %, and the IL252, ILD252 has a minimum CTR of 100 %. The IL250, IL251, IL252 are single channel optocouplers. The ILD252 has two isolated channels in a single DIP package. ORDERING INFORMATION I L x 2 5 x PART NUMBER - # X 0 CTR BIN # # PACKAGE OPTION DIP Option 6 7.62 mm 10.16 mm Option 7 Option 9 T TAPE AND REEL > 0.7 mm > 0.1 mm CTR (%) AGENCY CERTIFIED/PACKAGE SINGLE CHANNEL, 6 PIN DUAL CHANNEL, 8 PIN UL, CSA, BSI, CQC 20 50 100 DIP-# IL251 IL250 IL252 - SMD-#, option 7 - IL250-X007 IL252-X007T (1) - SMD-#, option 9 IL251-X009T IL250-X009T (1) IL252-X009T (1) - 20 50 100 100 DIP-# - IL250-X001 IL252-X001 - DIP-#, option 6 - - IL252-X016 - SMD-#, option 7 - - IL252-X017T (1) ILD252-X017 VDE, UL, CSA, BSI, CQC 100 Notes * Additional options may be possible, please contact sales office (1) Also available in tubes; do not add "T" to end Rev. 1.9, 21-Feb-18 Document Number: 83618 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Forward continuous current Power dissipation IF 60 mA Pdiss 100 mW 1.33 mW/C Derate linearly from 25 C OUTPUT Collector emitter breakdown voltage BVCEO 30 V Emitter base breakdown voltage BVEBO 5 V Collector base breakdown voltage BVCBO 70 V Power dissipation single channel Pdiss 200 mW Power dissipation dual channel Pdiss 150 mW 2.6 mW/C 2 mW/C mW Derate linearly from 25 C single channel Derate linearly from 25 C dual channel COUPLER Total dissipation single channel Ptot 250 Total dissipation dual channel Ptot 400 mW 3.3 mW/C Derate linearly from 25 C single channel Derate linearly from 25 C dual channel 5.3 mW/C Storage temperature Tstg -55 to +150 C Operating temperature Tamb -55 to +100 C 10 s Lead soldering time at 260 C Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 10 mA VF - 1.2 1.5 V INPUT Forward voltage OUTPUT IC = 1 mA BVCEO 30 50 - V Emitter base breakdown voltage Collector emitter breakdown voltage IE = 100 A BVEBO 7 10 - V Collector base breakdown voltage IC = 10 A BVCBO 70 90 - V Collector emitter leakage current VCE = 10 V ICEO - 5 50 nA IF = 16 mA, IC = 2 mA VCEsat - - 0.4 V COUPLER Collector emitter saturation voltage Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Rev. 1.9, 21-Feb-18 Document Number: 83618 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION IF = 10 mA, VCE = 10 V Symmetry PART SYMBOL MIN. TYP. MAX. UNIT IL250 CTRDC 50 - - % IL251 CTRDC 20 - - % IL252, ILD252 CTRDC 100 - - % 0.50 1 2 IF = 10 mA SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) SYMBOL MIN. TYP. MAX. UNIT Turn-on time PARAMETER TEST CONDITION ton - TBD - s Turn-off time toff - TBD - s SAFETY AND INSULATION RATINGS PARAMETER Climatic classification TEST CONDITION Comparative tracking index Maximum rated withstanding isolation voltage t = 1 min Maximum repetitive peak isolation voltage VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C VALUE UNIT 55/100/21 CTI Maximum transient isolation voltage Isolation resistance SYMBOL According to IEC 68 part 1 175 VISO 4420 VRMS VIOTM 10 000 Vpeak VIORM 890 Vpeak RIO 1012 RIO 1011 Output safety power PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 C Creepage distance 7 mm Clearance distance 7 mm 0.4 mm Insulation thickness DTI Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits Rev. 1.9, 21-Feb-18 Document Number: 83618 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors 1.5 40 - 55 C 20 25 C 0 85 C - 20 - 40 - 60 - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 NCTR - Normalized CTR 0.5 NCTR(SAT) 0.1 1 10 Fig. 4 - Normalized Non-Saturated and Saturated CTR vs. LED Current 1.5 VCE = 10 V, IF = 10 mA TA = 25 C CTRce(sat) VCE = 0.4 V 0.5 NCTR(SAT) NCTR Normalized to: VCE = 10 V,IF = 10 mA, TA = 25 C CTRce(sat) VCE = 0.4 V 1.0 TA = 85 C 0.5 NCTR(SAT) NCTR 0.0 0.1 1 10 100 IF - LED Current (mA) iil250_02 0.1 VCE = 10 V, IF = 10 mA, TA = 25 C CTRce(sat) VCE = 0.4 V TA = 50 C 0.5 NCTR(SAT) NCTR I CE - Collector Current (mA) 35 Normalized to: 30 25 iil250_03 10 15 70 C 25 C 85 C 10 5 0 0 100 IF - LED Current (mA) Fig. 3 - Normalized Non-Saturated and Saturated CTR vs. LED Current Rev. 1.9, 21-Feb-18 50 C 20 0.0 1 100 Fig. 5 - Normalized Non-Saturated and Saturated CTR vs. LED Current 1.5 0.1 10 1 IF - LED Current (mA) iil250_05 Fig. 2 - Normalized Non-Saturated and Saturated CTR vs. LED Current 1.0 100 IF - LED Current (mA) iil250_04 0.0 NCTR - Normalized CTR CTRce(sat) VCE = 0.4 V TA = 70 C 1.5 Normalized to: 1.0 1.0 NCTR Fig. 1 - LED Forward Current vs.Forward Voltage 1.5 Normalized to: VCE = 10 V, IF = 10 mA TA = 25 C 0.0 VF - LED Forward Voltage iil250_01 NCTR - Normalized CTR 60 NCTR - Normalized CTR IF - LED Forward Current (mA) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) iil250_06 10 20 30 40 50 60 IF - LED Current (mA) Fig. 6 - Collector Emitter Current vs. Temperature and LED Current Document Number: 83618 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors 10 Normalized Photocurrent I CEO - Collector-Emitter (nA) 10 5 10 4 10 3 10 2 VCE = 10 V 10 1 TYPICAL 10 0 10 -1 0 20 40 60 80 NIB-TA = - 20 C NIb,TA = 25 C NIb,TA = 50 C NIb,TA = 70 C 0.1 100 TA- Ambient Temperature (C) iil250_07 0.1 1 100 10 IF - LED Current (mA) iil250_10 Fig. 7 - Collector Emitter Leakage Current vs.Temperature Fig. 10 - Normalized Photocurrent vs. IF and Temperature 1.5 NCTR cb - Normalized CTRcb 1 0.01 10 -2 - 20 1.2 70 C NhFE - Normalized hFE Normalized to: IF = 10 mA VCB = 9.3 V 1.0 TA = 25 C 0.5 25 C 50 C 70 C 0.0 1.0 Normalized to: 50 C I B = 20 A 25 C VCE = 10 V - 20 C TA = 25 C 0.8 0.6 0.4 0.1 10 1 1 100 IF - LED Current (mA) iil250_08 iil250_11 Fig. 8 - Normalized CTRCB vs. LED Current and Temperature NhFE(sat) - Normalized Saturated hFE 100 I CB = 1.0357 *IF ^ 1.3631 10 1 0.1 0.01 0.1 iil250_09 1000 1.0 70 C Normalized to: 50 C VCE = 10 V 25 C I B = 20 A - 20 C TA = 25 C 0.5 VCE = 0.4 V 0.0 1 10 1 100 IF - LED Current (mA) Fig. 9 - Collector Base Photocurrent vs. LED Current Rev. 1.9, 21-Feb-18 100 IB - Base Current (A) 1.5 TA = 25 C 10 Fig. 11 - Normalized Non Saturated hFE vs. Base Current and Temperature 1000 ICB - Collector Base Photocurrent (A) Normalized to: IF = 10 mA, T = 25 C iil250_12 10 100 1000 IB - Base Current (A) Fig. 12 - Normalized Saturated hFE vs. Base Current and Temperature Document Number: 83618 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL250, IL251, IL252, ILD252 www.vishay.com TA = 25 C, IF = 10 mA VCC = 5 V,Vth = 1.5 V tpHL 100 2.0 10 1.5 tpLH 1 tpHL - Propagation Delay (s) 2.5 1000 tpLH - Propagation Delay (s) Vishay Semiconductors 1.0 0.1 1 10 100 R L - Collector Load Resistor (k) iil250_13 Fig. 13 - Propagation Delay vs. Collector Load Resistor IF tD tR VO tPLH V TH = 1.5 V tPH L tS tF iil250_14 Fig. 14 - Switching Timing VCC = 5 V F = 10 kHz, DF = 50 % RL VO IF = 10 mA iil250_15 Fig. 15 - Switching Schematic Rev. 1.9, 21-Feb-18 Document Number: 83618 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL250, IL251, IL252, ILD252 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 6.4 0.1 ISO method A 8.6 0.1 7.62 typ. 1.2 0.1 1 min. 3.555 0.255 18 4 typ. 2.95 0.5 0.8 min. 0.85 0.05 0.5 0.05 0.25 typ. 3 to 9 7.62 to 8.81 i178004 2.54 typ. Pin one ID 4 3 2 1 5 6 7 8 6.645 0.165 ISO method A 9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 3.045 0.255 0.70 0.19 3 to 9 0.51 0.05 2.54 typ. 0.25 0.05 i178006 Option 6 Option 7 Option 9 10.36 9.96 7.62 typ. 9.53 10.03 7.8 7.4 7.62 ref. 0.7 4.6 4.1 0.102 0.249 8 min. 0.35 0.25 0.25 typ. 0.51 1.02 8.4 min. 15 max. 8 min. 10.16 10.92 Rev. 1.9, 21-Feb-18 10.3 max. 18450 Document Number: 83618 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000