REVISIONS PART NO. MCAP108224076A-391LU ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE - A RELEASED SHA 20/4/11 ASH 20/4/11 APPRVD DATE 04/5/11 Configurations and Dimensions A 23 mm B 12.5 mm C 12 1 mm D 1 mm (Min.) F O0.5 mm (Ref.) Schematic Diagram (Max.) - Note: 1. Wire UEFN/U (155C) O0.5mm 2. 76TS (Reference) C.W Side View Front View Test Data for Mechanical Electrical Characteristics Test Condition 10 KHz / 5 mA L0 390 H 15% Ta = 25C DCR 250 m (Max.) 10 KHz / 5 mA Irms = 1 A Temperature rise 40C (Max.) Test Item A mm B mm C mm D mm F mm Specification 23 (Max.) 12.5 (Max.) 12 1 1 (Min.) O0.5 (Ref.) 1 22 11.54 11.58 1.82 0.51 2 22.37 11.46 12.69 1.85 0.5 3 21.99 11.71 11.96 1.89 4 22.15 11.27 12.15 1.9 5 22.26 11.46 11.92 1.84 0.52 Average 22.15 11.49 12.06 1.86 0.51 0.51 Operating temperature : -55C to +130C Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2011. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: SHA DATE: 20/04/11 CHECKED BY: DATE: 20/04/11 SIZE DATE: 04/05/11 SCALE: NTS ASH APPROVED BY: Inductor A DWG NO. M10002640 U.O.M.: mm ELECTRONIC FILE MCAP108224076A-391LU SHEET: 1 OF REV A 3 REVISIONS PART NO. MCAP108224076A-391LU ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE - A RELEASED SHA 20/4/11 ASH 20/4/11 APPRVD DATE 04/5/11 Test Data for Electrical Test Item L0 H DCR m T Condition 10 KHz / 5 mA Ta = 25C 10 KHz / 5 mA Irms = 1 A Specification 390 15% 250 (Max.) Temperature rise 40C (Max.) 1 389.24 207.6 2 390.03 198.9 3 393.78 214.2 4 389.42 212.8 5 396.89 220.4 Average 391.87 210.78 OK OK Reliability Test Test Item Operating temperature range Storage condition Moisture sensitivity Solderability Specifications Test Method and Remarks -55C to +130C Including temperature rise due to self-generated heat. Ambient temperature Humidity : 0C to 40C : Below 70% RH To maintain the solderability of terminal electrodes, care must be taken to control temperature and humidity in the storage area. Appearance : No abnormality No damage : Within 5% : Within 5% According to J-STD-020B level 3 Test condition : 60C 60% RH Test duration : 40 hrs Recovery : 1 to 2 hours of recovery under the standard condition after the removal from the test chamber. DCR change Inductance change All termination shall exhibit a continuous solder coating free from defects for a minimum of 95% of the surface area of any individual lead. Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2011. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. According to J-STD-002B Steam aging category : 97C 98% RH Steam aging duration : 8 hrs Solder : Lead-free solder Solder temperature : 260 5C Dip time : 5 +0 / -0.5 s DRAWING TITLE: DRAWN BY: SHA DATE: 20/04/11 CHECKED BY: DATE: 20/04/11 SIZE DATE: 04/05/11 SCALE: NTS ASH APPROVED BY: Inductor A DWG NO. M10002640 U.O.M.: mm ELECTRONIC FILE MCAP108224076A-391LU SHEET: 2 OF REV A 3 REVISIONS PART NO. MCAP108224076A-391LU ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE - A RELEASED SHA 20/4/11 ASH 20/4/11 APPRVD DATE 04/5/11 Material List No Item Material Description 1 Core T80B-75-TAF200 (Red / White) 2 Wire O0.5 mm UEFN/U (155C) 3 Solder (Lead-free) Sn99.3% / Cu0.7% Part Number Table Description Part Number Inductor, 390H, 15%, 2 Pins MCAP108224076A-391LU http://www.element14.com http://www.farnell.com http://www.newark.com Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2011. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: SHA DATE: 20/04/11 CHECKED BY: DATE: 20/04/11 SIZE DATE: 04/05/11 SCALE: NTS ASH APPROVED BY: Inductor A DWG NO. M10002640 U.O.M.: mm ELECTRONIC FILE MCAP108224076A-391LU SHEET: 3 OF REV A 3