CAT.8100P
ALUMINUM ELECTROLYTIC CAPACITORS
HDseries
High Ripple Low Impedance
Laminated case series.
Lower impedance at high frequency range.
Smaller case size and high ripple current.
Specifications
HD
HC
Approved by Reliability Center for Electronic
Component, Japan-Certification No. RCJ-03-23C
Dimension table in next pages.
Low
Impedance
Please refer to page 18, 19, 20 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
Radial Lead Type Type numbering system (Example : 10V 3300
µ
F)
Performance Characteristics
ltem
0.22 0.19 0.16 0.14 0.12 0.10
Category
Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
Stability at Low Temperature
Endurance
Marking
— 40 ~ + 105˚C
6.3 ~ 50V
22 ~ 6800
µ
F
±20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater.
Rated voltage (V)
Rated voltage (V)
tanδ (MAX.)
For capacitance of more than 1000
µ
F, add 0.02 for every increase of 1000
µ
F.
Z— 25˚C/Z + 20˚C
Z— 40˚C/Z + 20˚C
Impedance ratio
ZT/Z20(MAX.)
6.3 10 16 25 35 50
222222
333333
6.3 10 16 25 35 50
After an application of D.C. bias voltage plus the rated ripple current for 5000 hours (φD 6.3 : 2000 hours,
φD=8 : 3000 hours, φD=10 : 4000 hours) at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet
the characteristics requirements listed below.
Black print on the case top.
Capacitance change Within ±25% of initial value
tanδ200% or less of initial specified value
Leakage current lnitial specified value or less
120Hz
20˚C
120Hz