MILITARY DATA SHEET Original Creation Date: 08/15/95 Last Update Date: 12/20/96 Last Major Revision Date: 08/15/95 MNLM199-X REV 0BL PRECISION VOLTAGE REFERENCE Industry Part Number NS Part Numbers LM199 LM199H-SMD* LM199H/883 Prime Die LM199 Controlling Document 5962-8856102XA* Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLM199-X REV 0BL Electrical Characteristics DC PARAMETERS SYMBOL PARAMETER CONDITIONS Vr Reverse Breakdown Voltage 0.5mA <= Ir <= 10mA Delta Vr Reverse Breakdown Voltage Change with Current Vnrms NOTES PINNAME MIN 6.8 MAX UNIT SUBGROUPS 7.1 V 1, 2, 3 0.5mA <= Ir <= 10mA 9.0 mV 1, 2, 3 Zener Rms noise Voltage Ir = 1mA, Vh = 40V, 10Hz<Freq<10KHz 20.0 uV 1 Ihpk Peak Heater Current Vh = 40V, 1 % Duty Cycle 200 mA 1 Il Leakage Zener to Substrate Vh = 40V 250 nA 1 Delta Vz/ Delta T Reverse Breakdown Temperature Coefficient Ir = 1mA, -55 C <= TA <= 85 C 3 1 ppm/C 1 Ir = 1mA, 85 C <= TA <= 125 C 3 15 ppm/C 1 Zr Reverse Dynamic Impedance Ir = 1mA 1 1 Ohm 1 Ih Stabilized Heater Current Vh = 30V(tested after 5 seconds of heater turn on time) 30 mA 1 2 14 mA 2 2 85 mA 3 80 uV 1 V 1 Vh = 30V (Still air) Vnpk Zener Peak Noise Voltage Ir = 1mA, Vh = 40V, 10Hz<Freq<10KHz Vf Forward Voltage Ir = 1mA Note 1: Note 2: Note 3: -1.6 Guaranteed by "Reverse Breakdown Voltage Change with Current". Guaranteed parameter, not tested. Tested on Auto Drift test oven. 2