STP8NM50 STP8NM50FP N-channel 550V @ Tjmax - 0.7 - 8A - TO-220 - TO-220FP MDmeshTM Power MOSFET General features Type VDSS (@Tjmax) RDS(on) STP8NM50 550V <0.8 8A STP8NM50FP 550V <0.8 8A (1) ID 1. Limited only by maximum temperature allowed 3 1 100% avalanche tested High dv/dt and avalanche capabilities Low gate input resistance Low input capacitance and gate charge TO-220 3 2 1 2 TO-220FP Description The MDmeshTM is a new revolutionary Power MOSFET technology that associates the multiple drain process with the company's PowerMESHTM horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the company's proprietary strip technique yields overall dynamic performance that is significantly better than that of similar competition's products. Internal schematic diagram Applications Switching application Order codes Part number Marking Package Packaging STP8NM50 P8NM50 TO-220 Tube STP8NM50FP P8NM50FP TO-220FP Tube October 2006 Rev 7 1/14 www.st.com 14 Contents STP8NM50 - STP8NM50FP Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 ................................................ 9 STP8NM50 - STP8NM50FP 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter Unit TO-220 VGS Gate-source voltage TO-220FP 30 V (1) A A ID Drain current (continuous) at TC = 25C 8 8 ID Drain current (continuous) at TC = 100C 5 5 (1) IDM (2) PTOT dv/dt(3) Drain current (pulsed) 32 32 Total dissipation at TC = 25C 100 (1) 25 A W Derating factor 0.8 W/C Peak diode recovery voltage slope 15 V/ns VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Tj Tstg Operating junction temperature Storage temperature -- 2500 -65 to 150 V C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 8 A, di/dt 200 A/s, VDD V(BR)DSS, Tj TJMAX. Table 2. Symbol Thermal data Parameter TO-220 TO-220FP Unit 1.25 5 C/W Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-amb max 62.5 C/W Maximum lead temperature for soldering purpose 300 C Max value Unit Tl Table 3. Symbol Avalanche characteristics Parameter IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) 2.5 A EAS Single pulse avalanche energy (starting Tj=25C, ID=IAR, VDD= 50V) 200 mJ 3/14 Electrical characteristics 2 STP8NM50 - STP8NM50FP Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol On/off states Parameter Test conditions Drain-source breakdown voltage ID = 250A, VGS= 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating, VDS = Max rating @125C IGSS Gate body leakage current (VDS = 0) VGS = 30 V VGS(th) Gate threshold voltage VDS= VGS, ID = 250 A RDS(on) Static drain-source on resistance VGS= 10 V, ID= 2.5A V(BR)DSS Table 5. Symbol Min. Typ. Max. Unit 500 3 V 1 10 A A 100 nA 4 5 V 0.7 0.8 Typ. Max. Unit Dynamic Parameter Test conditions Min. VDS > ID(on) x RDS(on)max, ID= 2.5A 2.4 S Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1 MHz, VGS=0 415 88 12 pF pF pF Equivalent ouput capacitance VGS=0, VDS =0V to 400V 50 pF Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD=400V, ID = 5A VGS =10V (see Figure 16) 13 4 6 nC nC nC RG Gate input resistance f=1MHz Gate DC Bias = 0 Test signal level = 20mV Open drain 3 gfs (1) Forward transconductance Ciss Coss Crss Coss eq.(2) 1. Pulsed: pulse duration=300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/14 STP8NM50 - STP8NM50FP Table 6. Symbol Electrical characteristics Switching times Parameter Test conditions Min Typ Max Unit td(on) tr Turn-on delay time Rise time VDD=250 V, ID=2.5A, RG=4.7, VGS=10V (see Figure 15) 16 8 ns ns tr(Voff) tf tc Off-voltage rise time Fall time Cross-over time VDD=400 V, ID=5A, RG=4.7, VGS=10V (see Figure 15) 14 6 13 ns ns ns Table 7. Symbol Source drain diode Parameter Test conditions Min Typ Max Unit 8 32 A A 1.5 V ISD ISDM Source-drain current Source-drain current (pulsed) VSD Forward on voltage ISD=10A, VGS=0 trr Qrr Reverse recovery time Reverse recovery charge Reverse recovery current ISD=5A, di/dt = 100A/s, VDD=100 V, Tj=25C (see Figure 20) 185 1.1 11.5 ns C A Reverse recovery time Reverse recovery charge Reverse recovery current ISD=5A, di/dt = 100A/s, VDD=100 V, Tj=150C (see Figure 20) 270 1.6 12 ns C A IRRM trr Qrr IRRM 5/14 Electrical characteristics STP8NM50 - STP8NM50FP 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for TO-220 Figure 2. Thermal impedance for TO-220 Figure 3. Safe operating area for TO-220FP Figure 4. Safe operating area for TO-220FP Figure 5. Output characteristics Figure 6. Transfer characteristics 6/14 STP8NM50 - STP8NM50FP Electrical characteristics Figure 7. Transconductance Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 8. Static drain-source on resistance Figure 12. Normalized on resistance vs temperature 7/14 Electrical characteristics Figure 13. Source-drain diode forward characteristics 8/14 STP8NM50 - STP8NM50FP Figure 14. Normalized BVDSS vs temperature STP8NM50 - STP8NM50FP 3 Test circuit Test circuit Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test switching and diode recovery times circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform 9/14 Package mechanical data 4 STP8NM50 - STP8NM50FP Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/14 STP8NM50 - STP8NM50FP Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 oP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 11/14 Package mechanical data STP8NM50 - STP8NM50FP TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. 4.6 0.173 0.181 MAX. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 O 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 12/14 L5 1 2 3 L4 STP8NM50 - STP8NM50FP 5 Revision history Revision history Table 8. Revision history Date Revision Changes 09-Sep-2004 4 Title changed 11-Aug-2006 5 New template 22-Sep-2006 6 Some value change in Table 4: On/off states 18-Oct-2006 7 Updated Note 3 on page 3 13/14 STP8NM50 - STP8NM50FP Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14