Product data sheet 09 45 145 9011 PushPull V4 plug, Signal, 10-pol, Kunsts PushPull V4 plug, Signal, 10-pol, Kunsts Part number 09 45 145 9011 Specification PushPull V4 plug, Signal, 10-pol, Kunsts HARTING eCatalogue https://b2b.harting.com/09451459011 Image is for illustration purposes only. Please refer to product description. Identification Category Connectors Series HARTING PushPull (V4) Identification Signal Element Cable connector Version Termination method Crimp termination Locking type PushPull Shielding Fully shielded, 360 shielding contact Number of contacts 10 Pack contents incl. plastic housing and female insert Technical characteristics Conductor cross-section 0.13...0.82 mm Conductor cross-section AWG 26 ... AWG 18 Wire outer diameter 2.1mm Contact spacing (termination side) 2.4mm 3mm Contact spacing (mating side) 2.4mm 3mm Rated current 5A Rated voltage 50V Rated impulse voltage 1.5kV Pollution degree 3 Page1/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality, conformity with applicable laws and directives, as well as for the electrical safety in the particular application. HARTING Electronics GmbH | Marienwerderstrae 3 | 32339 Espelkamp | Germany Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com Product data sheet 09 45 145 9011 PushPull V4 plug, Signal, 10-pol, Kunsts Technical characteristics Clearance distance 1.1mm Creepage distance 1.1mm Insulation resistance >109 Contact resistance 10m Tightening torque 1.3 ... 1.5 Nm Limiting temperature -40...+85C Insertion force 50N Withdrawal force 50N Mating cycles 500 Degree of protection acc. to IEC 60529 IP65 IP67 Cable diameter 4.5 ... 10 mm Test voltage Ur.m.s. 1.5 kV (contact-contact) 1.5 kV (contact-ground) Transmission characteristics Cat. 5Class D up to 100 MHz Data rate 10Mbit/s 100Mbit/s Isolation group I(600 CTI) Vibration resistance 10-500 Hz, 5 g, 0.35 mm, 2h/axis 5.72 m/sacc. to IEC 61373 Category 1 Class B Shock resistance 25 g / 11 ms, 3 shocks / axis and direction 5 g / 30 ms, 5 shocks / axis and directionacc. to IEC 61373 Category 1 Class B Material properties Material (contacts) Copper alloy Surface (contacts) Au over Ni Material (hood/housing) Polyamide (PA) Colour (hood/housing) Black Material flammability class acc. to UL94 V-0 RoHS compliant ELV status compliant China RoHS e REACH Annex XVII substances No REACH ANNEX XIV substances No Page2/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality, conformity with applicable laws and directives, as well as for the electrical safety in the particular application. HARTING Electronics GmbH | Marienwerderstrae 3 | 32339 Espelkamp | Germany Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com Product data sheet 09 45 145 9011 PushPull V4 plug, Signal, 10-pol, Kunsts Material properties REACH SVHC substances No Specifications and approvals Specifications IEC 61076-3-106Variant 4 (V4) EN 45545-2R26: HL1, HL2, HL3 Approvals DNV GL UL / CSA UL 1977 ECBT2.E102079 CSA-C22.2 No. 182.3 ECBT8.E102079 Commercial data Packaging size 10 Net weight 37.85g Country of origin Romania European customs tariff number 85366990 eCl@ss 27440101 Rectangular connectors (set) The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (nonintermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques acc. toIEC 60512-5-2 Operating current (A) Current carrying capacity Ambient temperature (C) Turned Stamped Conductor cross-section0.75mm Page3/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality, conformity with applicable laws and directives, as well as for the electrical safety in the particular application. HARTING Electronics GmbH | Marienwerderstrae 3 | 32339 Espelkamp | Germany Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com Product data sheet 09 45 145 9011 PushPull V4 plug, Signal, 10-pol, Kunsts The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (nonintermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques acc. toIEC 60512-5-2 Operating current (A) Current carrying capacity Ambient temperature (C) Turned Stamped Conductor cross-section0.5mm Page4/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality, conformity with applicable laws and directives, as well as for the electrical safety in the particular application. HARTING Electronics GmbH | Marienwerderstrae 3 | 32339 Espelkamp | Germany Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com