Product data sheet
09 45 145 9011
PushPull V4 plug, Signal, 10-pol, Kunsts
PushPull V4 plug, Signal, 10-pol, Kunsts
Image is for illustration purposes only. Please refer to product description.
Part number 09 45 145 9011
Specification PushPull V4 plug, Signal, 10-pol, Kunsts
HARTING eCatalogue https://b2b.harting.com/09451459011
Identification
Category Connectors
Series HARTING PushPull (V4)
Identification Signal
Element Cable connector
Version
Termination method Crimp termination
Locking type PushPull
Shielding Fully shielded, 360° shielding contact
Number of contacts 10
Pack contents incl. plastic housing and female insert
Technical characteristics
Conductor cross-section 0.13...0.82 mm²
Conductor cross-section AWG 26 ... AWG 18
Wire outer diameter ≤2.1mm
Contact spacing (termination side) 2.4mm
3mm
Contact spacing (mating side) 2.4mm
3mm
Rated current 5A
Rated voltage 50V
Rated impulse voltage 1.5kV
Pollution degree 3
Page1/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
09 45 145 9011
PushPull V4 plug, Signal, 10-pol, Kunsts
Technical characteristics
Clearance distance ≥1.1mm
Creepage distance ≥1.1mm
Insulation resistance >109 Ω
Contact resistance ≤10mΩ
Tightening torque 1.3 ... 1.5 Nm
Limiting temperature -40...+85°C
Insertion force 50N
Withdrawal force 50N
Mating cycles ≥500
Degree of protection acc. to IEC 60529 IP65
IP67
Cable diameter 4.5 ... 10 mm
Test voltage Ur.m.s.
1.5 kV (contact-contact)
1.5 kV (contact-ground)
Transmission characteristics Cat. 5Class D up to 100 MHz
Data rate 10Mbit/s
100Mbit/s
Isolation group I(600 ≤ CTI)
Vibration resistance 10-500 Hz, 5 g, 0.35 mm, 2h/axis
5.72 m/s²acc. to IEC 61373 Category 1 Class B
Shock resistance 25 g / 11 ms, 3 shocks / axis and direction
5 g / 30 ms, 5 shocks / axis and directionacc. to IEC 61373 Category 1 Class B
Material properties
Material (contacts) Copper alloy
Surface (contacts) Au over Ni
Material (hood/housing) Polyamide (PA)
Colour (hood/housing) Black
Material flammability class acc. to UL94 V-0
RoHS compliant
ELV status compliant
China RoHS e
REACH Annex XVII substances No
REACH ANNEX XIV substances No
Page2/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
09 45 145 9011
PushPull V4 plug, Signal, 10-pol, Kunsts
Material properties
REACH SVHC substances No
Specifications and approvals
Specifications IEC 61076-3-106Variant 4 (V4)
EN 45545-2R26: HL1, HL2, HL3
Approvals DNV GL
UL / CSA UL 1977 ECBT2.E102079
CSA-C22.2 No. 182.3 ECBT8.E102079
Commercial data
Packaging size 10
Net weight 37.85g
Country of origin Romania
European customs tariff number 85366990
eCl@ss 27440101 Rectangular connectors (set)
Current carrying capacity
The current carrying capacity of the connectors is
limited by the thermal load capability of the contact
element material including the connections and the
insulating parts. The derating curve is therefore
valid for currents which flow constantly (non-
intermittent) through each contact element of the
connector evenly, without exceeding the allowed
maximum temperature.
Measuring and testing techniques acc. toIEC
60512-5-2
Operating current (A)
Ambient temperature (°C)
①Turned
②Stamped
Conductor cross-section0.75mm²
Page3/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
09 45 145 9011
PushPull V4 plug, Signal, 10-pol, Kunsts
Current carrying capacity
The current carrying capacity of the connectors is
limited by the thermal load capability of the contact
element material including the connections and the
insulating parts. The derating curve is therefore
valid for currents which flow constantly (non-
intermittent) through each contact element of the
connector evenly, without exceeding the allowed
maximum temperature.
Measuring and testing techniques acc. toIEC
60512-5-2
Operating current (A)
Ambient temperature (°C)
①Turned
②Stamped
Conductor cross-section0.5mm²
Page4/4 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the
user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com