OV2680/OV2685 2MP product brief lead free available in a lead-free package Cost-Effective, Low-Power 2-Megapixel Sensors for Feature Phones, Smartphones and Tablets The OV2680 (RAW) and OV2685 (SoC) are costeffective, low-power 2-megapixel CameraChipTM sensors for feature phones and front-facing camera applications in smartphones and tablets. The 1/5-inch sensors leverage a 1.75-micron OmniPixel3-HSTM pixel to deliver high quality 2-megapixel images and video at 30 frames per second (fps). The sensors' high sensitivity and low dark current deliver exceptional image and video quality, even in low-light conditions. The OV2680 and OV2685 are cost-effective upgrade solutions to the OV2659 & OV2675 CameraChip sensors with a smaller footprint and smaller die size. Compared to previous generations, the OV2680 and OV2685 offer improved image quality with the latest OmniPixel3-HS pixel architecture. Using OmniVision's proprietary sensor technology, both sensors reduce or eliminate common lighting and electrical sources of image contamination, such as fixed pattern noise, smearing, etc., to produce a clean, stable, color image. The OV2680 and OV2685 both feature a single-lane MIPI interface, which allows for a simple design with modern basebands. Find out more at www.ovt.com. OV2680/OV2685 Applications Ultrabooks Cellular and Picture Phones PC Multimedia Tablets Games Toys Ordering Information Home Entertainment OV02680-H47A (color, lead-free, 47-pin CSP5) OV02685-H53A (color, lead-free, 53-pin CSP5) Product Features MIPI and D-PHY specification (contains high sensitivity and low dark current one clock lane) with a maximum of for low-light conditions 750 Mbps data transfer rate supports free-running clock and support for output formats: gated clock - OV2680: 10-bit RAW RGB - OV2685: 10-bit RAW RGB, 8-bit YUV supports down-sampling and binning mode programmable controls for frame rate, mirror and flip, cropping, and windowing auto black level calibration Product Specifications low operating voltage and low power consumption for embedded portable applications supports global analog gain defect correction capability supports horizontal and vertical subsampling active array size: 1616 x 1216 lens size: 1/5" power supply: - OV2680 core: 1.58V 3% - OV2685 core: 1.7 ~ 1.9V - analog: 2.6 ~ 3.0V - I/O: 1.7 ~ 3.0V lens chief ray angle: 28.5 non-linear power requirements: - OV2680 active: 123 mW - OV2685 active: 259 mW - XSHUTDN: <1 A scan mode: progressive temperature range: - operating: -30C to +85C junction temperature - stable image: 0C to +50C junction temperature pixel size: 1.75 m x 1.75 m input clock frequency: 6 ~ 27 MHz maximum image transfer rate: 30 fps maximum exposure interval: 1 frame - 4 tROW image area: 2840 m x 2150 m package/die dimensions: - OV2680 CSP5: 4180 m x 3480 m - OV2685 CSP5: 4454 m x 4014 m output formats: 10-bit RGB RAW, 8-bit YUV (OV2685) Functional Block Diagram OV2680/OV2685 gain control control register bank 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.2, July, 2017 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com SID SIOD SCCB slave interface SIOC VSYNC FSIN GPIO timing generator and system control logic XSHUTDN XCLK PLL OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and VarioPixel are registered trademarks of OmniVision Technologies, Inc. The OmniVision logo and OmniPixel3-HS are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. MIPI FIFO 10-bit ADC AMP digital gain image array black level calibration row select column sample/hold image output interface formatter image sensor processor DSP image sensor core MIPI