RF01008, Rev. E (11/15/13) ©2013 Microsemi Corporation Page 1 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
Available
1500 Watt Unidirectional and Bidirectional
Transient Voltage Suppressor
Screeni ng in
reference to
MIL-PRF-19500
available
DESCRIPTION
Case 1 Package
The popular Transient Voltage Suppress or seri es of M1.5KE6.8 – M1.5KE400CA wit h its
various upscreening options offer an extended volt age range and provides a w ide vari ety of
commercial, h igh reliability, RoHS and b i dir ecti onal options. Al l have the same high peak
pulse power rati ng of 1500 W and ext r emely fas t r espons e ti me. Th ey c an protect from
secondary effects of lightning per IEC61000-4-5 and the c las s levels as s hown below as well
as voltage transients from induc ti ve s witc hing and R FI. Si nc e thei r r espons e ti me is virtually
instantaneous, t hey also protec t from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
High reliability devi ces with fabrication and assembly lot traceability
Economical plastic encapsulated TVS series for thru-hole mounti ng
lot norm screening performed on standby current (ID)
100% surge tested devices suppress transients up to 1500 watts @ 10/1000 µs (see figure 1)
Enhanced reliability sc reening available in reference to MIL-PRF-19500. Refer to Hirel Non-
Hermetic Product Portfolio for more details on the sc reening options.
(See part nomenclature for all options.)
Enhanced reliability source controlled devices have wafer fabrication and assembly lot traceability
Moisture c lassification is “Level 1” with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant versions avai lable
APPLICAT IONS / BENE FITS
High-reliability devices
Protection from switching and RFI induced transients
Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:
Class 1: M1.5KE6.8A to M1.5KE200CA
Class 2: M1.5KE6.8A to M.5KE180CA
Class 3: M1.5KE6.8A to M1.5KE91CA
Class 4: M1.5KE6.8A to M1.5KE43CA
Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:
Class 1: M1.5KE6.8A to M1.5KE110CA
Class 2: M1.5KE6.8A to M1.5KE56CA
Class 3: M1.5KE6.8A to M1.5KE27CA
Class 4: M1.5KE6.8A to M1.5KE13CA
Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance:
Class 2: M1.5KE6.8A to M1.5KE24CA
Class 3: M1.5KE6.8A to M1.5KE12CA
MSC Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01008, Rev. E (11/15/13) ©2013 Microsemi Corporation Page 2 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
MAXI MUM RATING S
Parameters/Test Conditions
Symbol
Value
Unit
Junction and S torage Temperature
TJ and TSTG
-65 to +150
ºC
Therm al Resistance, Junction to Lead @ 0.375 inch (10
mm) from body
RӨJL 22 ºC/W
Therm al Resistance, Junction to Ambient (1)
RӨJA
82
ºC/W
Peak Pulse Power @ TL = +25 ºC (2)
PPP
1500
W
Rated Average Power Dissipation
@ TL = +40 ºC
PM(AV) 5
1.52
(1)
W
Tclamping (0 volts to V(BR)
min)
< 100
< 5
ps
ns
Surge Peak Forward Current (3)
IFSM
200
A
Solder Temperature @ 10 s
TSP
260
oC
Notes: 1. When mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm.
2. At 10/1 00 0 µs wit h repetition rate of 0.01% or less (see Figure 1).
3. A t 8.3 ms ha lf -si ne wave f or uni di rec tional devic es only.
M ECHANICAL and PACKAGI NG
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readi ly solderable per MIL-STD-750 method 2026
MARKING: Part number and polarity band
POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 1.5 grams
See Package Dimensions on last page.
PART NOME NCLAT URE
M 1.5 K E 6.5 C A (e3)
Reliability Level*
M
MA
MX
MXL
(*See Hirel Non-Hermetic
Product Portfolio)
Peak Pulse Power
Kilowatt Rating
Encapsulated Plastic Package
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
+/- 5% Tolerance Level
Polarity
C = Bi-directional
Blank = Unidirectional
Nominal Breakdown Voltage
(See Electrical Characteristics
table)
RF01008, Rev. E (11/15/13) ©2013 Microsemi Corporation Page 3 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
SYMBOLS & DEF INIT IONS
Symbol
Definition
αV(BR)
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change i n
temperature that caused it expressed in %/°C or mV/°C.
I
(BR)
Breakdown Current: The current used for measuring breakdown voltage V
(BR)
.
V(BR)
Breakdown Voltage: The voltage across the device at a specified current I(BR) in the breakdown regi on.
VWM
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
VC
Clamping Voltage: The voltage ac ross the device in a region of low differential resistance during the application of an
impulse current (IPP) for a speci fied waveform.
IPP
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that i ts effect will have completel y disappeared before the next transient arrives.
PPP
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of IPP and VC.
ID
Standby Current: The current through the device at rated stand-off voltage.
RF01008, Rev. E (11/15/13) ©2013 Microsemi Corporation Page 4 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
ELECTRICAL CHARACT ERI STI CS @ 25 oC
Industry
Type
Number
Rated
Standoff
Voltage
VWM
(Note 1)
Breakdown
Voltage
V(BR) @ I(BR)
Maximum
Clamping
Voltage
VC @ IPP
Maximum
Standby
Current
ID @ VWM
Maximum
Peak Pulse
Current
IPP
(Fig. 2)
Maximum
Temperature
Coe f f ic ien t of
V(BR)
αV(BR)
Volts
Volts
Min. Max.
mA
Volts
µA
A
%/oC
M1.5KE6.8A
M1.5KE7.5A
5.80
6.40
6.45 7.14
7.13 7.88
10
10
10.5
11.3
1000
500
143.0
132.0
0.057
0.061
M1.5KE8.2A
M1.5KE9.1A
7.02
7.78
7.79 8.61
8.65 9.55
10
1
12.1
13.4
200
50
124.0
112.0
0.065
0.068
M1.5KE10A
M1.5KE11A
8.55
9.40
9.50 10.50
10.50 11.60
1
1
14.5
15.6
10
5
103.0
96.0
0.073
0.075
M1.5KE12A
M1.5KE13A
10.22
11.10
11.40 12.60
12.40 13.70
1
1
16.7
18.2
5
5
90.0
82.0
0.078
0.081
M1.5KE15A
M1.5KE16A
12.80
13.60
14.30 15.80
15.20 16.80
1
1
21.2
22.5
1
1
71.0
67.0
0.084
0.086
M1.5KE18A
M1.5KE20A
15.30
17.10
17.10 18.90
19.00 21.00
1
1
25.2
27.7
1
1
59.5
54.0
0.088
0.090
M1.5KE22A
M1.5KE24A
18.80
20.50
20.90 23.10
22.80 25.20
1
1
30.6
33.2
1
1
49.0
45.0
0.092
0.094
M1.5KE27A
M1.5KE30A
23.10
25.60
25.70 28.40
28.50 31.50
1
1
37.5
41.4
1
1
40.0
36.0
0.096
0.097
M1.5KE33A
M1.5KE36A
28.20
30.80
31.40 34.70
34.20 37.80
1
1
45.7
49.9
1
1
33.0
30.0
0.098
0.099
M1.5KE39A
M1.5KE43A
33.30
36.80
37.10 41.00
40.90 45.20
1
1
53.9
59.3
1
1
28.0
25.3
0.100
0.101
M1.5KE47A
M1.5KE51A
40.20
43.60
44.70 49.40
48.50 53.60
1
1
64.8
70.1
1
1
23.2
21.4
0.101
0.102
M1.5KE56A
M1.5KE62A
47.80
53.00
53.20 58.80
58.90 65.10
1
1
77.0
85.0
1
1
19.5
17.7
0.103
0.104
M1.5KE68A
M1.5KE75A
58.10
64.10
64.60 71.40
71.30 78.80
1
1
92.0
103.0
1
1
16.3
14.6
0.104
0.105
M1.5KE82A
M1.5KE91A
70.10
77.80
77.90 86.10
86.50 95.50
1
1
113.0
125.0
1
1
13.3
12.0
0.105
0.106
M1.5KE100A
M1.5KE110A
85.50
94.00
95.00 105.00
105.00 116.00
1
1
137.0
152.0
1
1
11.0
9.9
0.106
0.107
M1.5KE120A
M1.5KE130A
102.00
111.00
114.00 126.00
124.00 137.00
1
1
165.0
179.0
1
1
9.1
8.4
0.107
0.107
M1.5KE150A
M1.5KE160A
128.00
136.00
143.00 158.00
152.00 168.00
1
1
207.0
219.0
1
1
7.2
6.8
0.108
0.108
M1.5KE170A
M1.5KE180A
145.00
154.00
162.00 179.00
171.00 189.00
1
1
234.0
246.0
1
1
6.4
6.1
0.108
0.108
M1.5KE200A
M1.5KE220A
171.00
185.00
190.00 210.00
209.00 231.00
1
1
274.0
328.0
1
1
5.5
4.6
0.108
0.110
M1.5KE250A
M1.5KE300A
214.00
256.00
237.00 263.00
285.00 315.00
1
1
344.0
414.0
1
1
5.0
5.0
0.110
0.111
M1.5KE350A
M1.5KE400A
300.00
324.00
332.00 368.00
380.00 420.00
1
1
482.0
548.0
1
1
4.0
4.0
0.111
0.111
NOTES: 1. Normal sel ection criteria for TVS devices is by rated stand-off volt age (VWM) and sh ould be equal or greater th an dc or continuous peak
operating voltage.
2. TVS devices are tested to maximum peak pulse current (IPP) with clamping voltage monitored. Th is surge capability is one of the most
significant electrical characteristics of the device and should be con sidered as part of customer quality inspections.
3. For Bidirectional types having VWM of 8 volts and under, the ID leakage current is doubled. Also for bidirectional parts, the capacitance
will be half that shown in Fig. 2 for zero bias.
4. For un idirectional, the forward voltage (VF) is 3.5 volts maximum at 100 Amps peak for 8.3 ms half-sine wav e.
RF01008, Rev. E (11/15/13) ©2013 Microsemi Corporation Page 5 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
GRAPHS
Pulse Time (tw) in µs
FIGURE 1
P eak Pulse Power vs Puls e Time (tw) in µs
t Time ms
Test waveform par ameters: tr= 10 µs, tp=1000µ s
FIGURE 2
Pulse Waveform for 10/1000 Exponential Surge
PPP - Peak Pulse Power - kW
Pulse Current in Percent of I
PP
RF01008, Rev. E (11/15/13) ©2013 Microsemi Corporation Page 6 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
GRAPHS (continued)
Lead or Am bient Temperatur e °C
FIG URE 3
Derating Curve
V(BR)Br eakdown Voltage Volts
FIGURE 4
Typical C apacitance vs. Breakdown Vol tage
Peak Pulse Power (P
pp
) or co nti n uous
Average Power in Percent of 25°C
C
T
Capacitance Pico farads
RF01008, Rev. E (11/15/13) ©2013 Microsemi Corporation Page 7 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
PACKAGE DIM ENSIONS
NOTES:
1 Dimensions are in inches.
2 Millimeter equivalents are given for information only.
3 The major diameter is essentially constant along its length.
4 In acc ordance with A SME Y14.5M, diameters are equivalent to Φx
symbology.
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
BD
0.190
0.205
4.826
5.207
BL
0.360
0.375
9.146
9.527
LD
0.038
0.042
0.958
1.074
LL
1.10
1.625
27.9
41.28