TCR's for MSI Resistors TEMPERATURE COEFFICIENT OF RESISTANCE RESISTANCE RANGE IN OHMS Type 96 84 66 98 91 10 20 81 56 19 82 93 61 86 5 83 90 87 94 97 80 88 85 89 68 30 28 26 0.1 to < 1 400 300 300 300 100 100 300 100 100 100 100 100 100 100 500 100 100 100 100 200 500 100 500 100 100 200 200 200 1 to < 5 300 100 100 100 100 100 100 100 100 100 100 100 100 100 200 100 100 100 100 100 300 100 300 100 100 100 100 100 5 to < 10 200 100 100 100 100 100 100 100 100 100 100 100 100 100 200 100 100 100 100 100 100 100 100 100 100 100 100 100 10 to < 1 M 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1M to < 10M 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 10M 100M 250M 500M to < 100M to < 250M to < 500M to < 750M 200 300 300 400 200 300 300 400 200 300 300 400 200 300 300 400 100 150 200 300 200 200 200 300 100 300 300 400 100 200 200 300 100 200 200 300 100 150 200 300 100 150 200 300 100 150 200 300 100 150 200 300 100 300 200 300 200 200 200 200 100 150 200 300 100 200 300 400 100 150 200 300 100 200 300 400 200 200 300 400 100 100 100 200 100 150 200 300 100 100 100 200 100 150 200 300 100 200 300 400 100 150 200 300 100 150 200 300 100 150 200 300 750M to < 1G 400 400 400 400 300 300 400 300 300 300 300 300 300 300 200 300 400 300 400 400 200 300 200 300 400 300 300 300 1. Table list optimal TCR's, add 200 for standard TCR's. 2. Optimal TCR's valid for SM termination, may not be available for all other terminations. ___________________________________________________________ Short Term Overload 0.25% 0.03% High Temperature Exposure 0.50% 0.05% Thermal Shock 0.50% 0.07% Low Temperature Operation 0.25% 0.05% Resistance to Bonding Exposure / Soldering Heat 0.25% 0.09% Moisture Resistance 0.50% 0.06% Stability (Life 70C 2,000Hrs) 0.50% 0.04% Stability (Life 70C 10,000Hrs) 2.00% 0.07% ______________________________________________________________ Operating temperature range from -55C to +150C MADE IN AMERICA 8031 Rev B 0604 110 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 MIL-PRF-55342 Test MIL-PRF-55342 Requirement MSI Typical ______________________________________________________________ POWER DERATING CURVE PERCENT OF RATED POWER Electrical Performance Characteristics ___________________________________________________________ TEMPERATURE (C) Power rating at 70C derated linearly to 0% power at 150C. (P=E2/R) 5 Mini WA Series Resistors Style Type Case Size MWA 96 0201 84 0202 66 0203 98 0302 91 0303 10 0404 Length Width Thickness Pad Width 0.024 0.002 0.012 0.002 0.008 0.002 0.007 0.002 (0.610 0.051) (0.305 0.051) (0.203 0.051) (0.178 0.051) 0.024 0.002 0.021 0.002 0.008 0.002 0.007 0.002 (0.610 0.051) (0.533 0.051) (0.203 0.051) (0.178 0.051) 0.027 0.002 0.031 0.002 0.012 0.003 0.008 0.002 (0.686 0.051) (0.787 0.051) (0.305 0.076) (0.203 0.051) 0.032 0.003 0.020 0.003 0.012 0.003 0.008 0.0031 (0.813 0.076) (0.508 0.076) (0.305 0.076) (0.203 0.076) 0.030 0.003 0.030 0.003 0.012 0.003 0.008 0.0031 (0.762 0.076) (0.762 0.076) (0.305 0.076) (0.203 0.076) 0.037 0.003 0.035 0.003 0.012 0.003 0.012 0.004 (0.940 0.076) (0.889 0.076) (0.305 0.076) (0.305 0.102) Length Width Thickness Pad Width 0.044 0.004 0.022 0.003 0.013 0.003 0.011 0.004 (1.118 0.102) (0.559 0.076) (0.330 0.076) (0.279 0.102) 0.054 0.005 0.025 0.003 0.013 0.003 0.015 0.0051 (1.372 0.127) (0.635 0.076) (0.330 0.076) (0.381 0.127) 0.050 0.005 0.032 0.003 0.013 0.003 0.015 0.005 (1.270 0.127) (0.813 0.076) (0.330 0.076) (0.381 0.127) 0.055 0.005 0.042 0.003 0.013 0.003 0.015 0.0051 (1.397 0.127) (1.067 0.076) (0.330 0.076) (0.381 0.127) 0.054 0.005 0.050 0.003 0.013 0.003 0.015 0.0051 (1.372 0.127) (1.270 0.076) (0.330 0.076) (0.381 0.127) 0.065 0.005 0.032 0.003 0.013 0.003 0.015 0.0051 (1.651 0.127) (0.813 0.076) (0.330 0.076) (0.381 0.127) 0.065 0.005 0.042 0.003 0.018 0.003 0.017 0.005 (1.651 0.127) (1.067 0.076) (0.457 0.076) (0.432 0.127) Inches (mm) Inches (mm) Inches (mm) Inches (mm) 1 Dimensions are for back termination only. WA Series Resistors Style Type WA Case Size 20 0402 81 0502 56 0503 19 0504 82 0505 93 0603 61 0604 Inches (mm) Inches (mm) Inches (mm) Inches (mm) 1 Dimensions are for back termination only. 6 E-mail: msithick@mini-systemsinc.com Web site: http://www.Mini-SystemsInc.com MADE IN AMERICA 8013 Rev B 0604 WA Series Resistors Style Type WA Case Size 86 0805 5 1002 83 1005 90 1010 87 1206 94 1210 97 1218 80 1505 88 2010 85 2307 89 2512 68 3939 30 5024 28 6632 26 6645 Length Width Thickness Pad Width 0.080 0.006 0.050 0.003 0.018 0.003 0.015 0.005 (2.032 0.152) (1.270 0.076) (0.457 0.076) (0.381 0.127) 0.105 0.005 0.027 0.003 0.013 0.003 0.020 0.005 (2.667 0.127) (0.686 0.076) (0.330 0.076) (0.508 0.127) 0.104 0.006 0.050 0.003 0.018 0.004 0.015 0.005 (2.642 0.152) (1.270 0.076) (0.457 0.102) (0.381 0.127) 0.104 0.006 0.100 0.003 0.018 0.004 0.015 0.005 (2.642 0.152) (2.540 0.076) (0.457 0.102) (0.381 0.127) 0.127 0.006 0.063 0.003 0.018 0.004 0.019 0.0051 (3.226 0.152) (1.600 0.076) (0.457 0.102) (0.483 0.127) 0.125 0.005 0.100 0.003 0.018 0.004 0.019 0.005 (3.175 0.127) (2.540 0.076) (0.457 0.102) (0.483 0.127) 0.120 0.005 0.180 0.003 0.030 0.005 0.025 0.005 (3.048 0.127) (4.572 0.076) (0.762 0.127) (0.635 0.127) 0.155 0.005 0.050 0.003 0.018 0.004 0.015 0.005 (3.937 0.127) (1.270 0.076) (0.457 0.102) (0.381 0.127) 0.210 0.006 0.098 0.003 0.018 0.004 0.020 0.005 (5.334 0.152) (2.489 0.076) (0.457 0.102) (0.508 0.127) 0.228 0.005 0.075 0.003 0.018 0.004 0.020 0.005 (5.791 0.127) (1.905 0.076) (0.457 0.102) (0.508 0.127) 0.256 0.006 0.124 0.003 0.030 0.005 0.020 0.005 (6.502 0.152) (3.150 0.076) (0.762 0.127) (0.508 0.127) 0.394 0.008 0.390 0.005 0.030 0.005 0.043 0.005 (10.008 0.203) (9.906 0.127) (0.762 0.127) (1.092 0.127) Inches (mm) Inches (mm) Inches (mm) Inches (mm) 0.501 0.008 0.246 0.004 0.030 0.005 0.058 0.005 (12.725 0.203) (6.248 0.102) (0.762 0.127) (1.473 0.127) 0.674 0.008 0.332 0.005 0.030 0.005 0.067 0.006 (17.120 0.203) (8.433 0.127) (0.762 0.127) (1.702 0.152) 0.675 0.009 0.499 0.005 0.030 0.005 0.067 0.0061 (17.145 0.229) (12.675 0.127) (0.762 0.127) (1.702 0.152) 1 1 Dimensions are for back termination only. WA (Wrap Around) W T L MADE IN AMERICA 8013 Rev B 0604 7 Mini HW Series Resistors Style Type Case Size MHW 96 0201 84 0202 66 0203 98 0302 91 0303 10 0404 Length Width Thickness1 Top Contact Pad Width 0.023 0.002 0.012 0.002 0.008 0.002 0.005 0.002 (0.584 0.051) (0.305 0.051) (0.203 0.051) (0.127 0.051) 0.023 0.002 0.021 0.002 0.008 0.002 0.005 0.002 (0.584 0.051) (0.533 0.051) (0.203 0.051) (0.127 0.051) 0.026 0.002 0.031 0.002 0.013 0.003 0.006 0.002 (0.660 0.051) (0.787 0.051) (0.330 0.076) (0.152 0.051) 0.031 0.003 0.020 0.003 0.013 0.003 0.006 0.002 (0.787 0.076) (0.508 0.076) (0.330 0.076) (0.152 0.051) 0.029 0.003 0.030 0.003 0.013 0.003 0.006 0.002 (0.736 0.076) (0.762 0.076) (0.330 0.076) (0.152 0.051) 0.036 0.003 0.035 0.003 0.013 0.003 0.009 0.002 (0.914 0.076) (0.889 0.076) (0.330 0.076) (0.229 0.051) Length Width Thickness1 Top Contact Pad Width 0.043 0.004 0.022 0.003 0.013 0.003 0.009 0.002 (1.092 0.102) (0.559 0.076) (0.330 0.076) (0.229 0.051) 0.051 0.004 0.025 0.003 0.013 0.003 0.010 0.002 (1.295 0.102) (0.635 0.076) (0.330 0.076) (0.254 0.051) 0.048 0.004 0.032 0.003 0.013 0.003 0.011 0.002 (1.219 0.102) (0.813 0.076) (0.330 0.076) (0.279 0.051) 0.053 0.004 0.042 0.003 0.013 0.003 0.011 0.002 (1.346 0.102) (1.067 0.076) (0.330 0.076) (0.279 0.051) 0.051 0.004 0.050 0.003 0.013 0.003 0.009 0.002 (1.295 0.102) (1.270 0.076) (0.330 0.076) (0.229 0.051) 0.063 0.004 0.032 0.003 0.013 0.003 0.010 0.002 (1.600 0.102) (0.813 0.076) (0.330 0.076) (0.254 0.051) 0.063 0.004 0.042 0.003 0.018 0.004 0.013 0.002 (1.600 0.102) (1.067 0.076) (0.457 0.102) (0.330 0.051) Inches (mm) Inches (mm) Inches (mm) Inches (mm) 1 Solder may add up to an additional 0.004" in thickness. HW Series Resistors Style Type HW Case Size 20 0402 81 0502 56 0503 19 0504 82 0505 93 0603 61 0604 Inches (mm) Inches (mm) Inches (mm) Inches (mm) 1 Solder may add up to an additional 0.004" in thickness. 8 E-mail: msithick@mini-systemsinc.com Web site: http://www.Mini-SystemsInc.com MADE IN AMERICA 8033 Rev A 0604 HW Series Resistors Style Type HW Case Size 86 0805 5 1002 83 1005 90 1010 87 1206 94 1210 97 1218 80 1505 88 2010 85 2307 89 2512 68 3939 30 5024 28 6632 26 6645 Length Width Thickness1 Top Contact Pad Width 0.078 0.004 0.050 0.003 0.018 0.004 0.013 0.002 (1.981 0.102) (1.270 0.076) (0.457 0.102) (0.330 0.051) 0.103 0.004 0.027 0.003 0.013 0.003 0.016 0.002 (2.616 0.102) (0.686 0.076) (0.330 0.076) (0.406 0.051) 0.101 0.004 0.050 0.003 0.018 0.004 0.013 0.002 (2.565 0.102) (1.270 0.076) (0.457 0.102) (0.330 0.051) 0.101 0.004 0.100 0.003 0.018 0.004 0.012 0.002 (2.565 0.102) (2.540 0.076) (0.457 0.102) (0.305 0.051) 0.123 0.004 0.063 0.003 0.018 0.004 0.015 0.002 (3.124 0.102) (1.600 0.076) (0.457 0.102) (0.381 0.051) 0.123 0.004 0.100 0.003 0.019 0.004 0.015 0.002 (3.124 0.102) (2.540 0.076) (0.483 0.102) (0.381 0.051) 0.118 0.004 0.180 0.003 0.030 0.005 0.022 0.002 (2.997 0.102) (4.572 0.076) (0.762 0.127) (0.559 0.051) 0.153 0.004 0.050 0.003 0.018 0.004 0.012 0.002 (3.886 0.102) (1.270 0.076) (0.457 0.102) (0.305 0.051) 0.207 0.004 0.098 0.003 0.018 0.004 0.017 0.002 (5.258 0.102) (2.489 0.076) (0.457 0.102) (0.432 0.051) 0.226 0.004 0.075 0.003 0.018 0.004 0.016 0.002 (5.740 0.102) (1.905 0.076) (0.457 0.102) (0.406 0.051) 0.253 0.004 0.124 0.003 0.030 0.005 0.017 0.002 (6.426 0.102) (3.150 0.076) (0.762 0.127) (0.432 0.051) 0.390 0.006 0.390 0.005 0.030 0.005 0.040 0.002 (9.906 0.152) (9.906 0.127) (0.762 0.127) (1.016 0.051) Inches (mm) Inches (mm) Inches (mm) Inches (mm) 0.497 0.006 0.246 0.005 0.030 0.005 0.053 0.002 (12.624 0.152) (6.248 0.127) (0.762 0.127) (1.346 0.051) 0.669 0.006 0.332 0.005 0.030 0.005 0.063 0.002 (16.993 0.152) (8.433 0.127) (0.762 0.127) (1.600 0.051) 0.669 0.006 0.499 0.005 0.030 0.005 0.063 0.002 (16.993 0.152) (12.675 0.127) (0.762 0.127) (1.600 0.051) 1 Solder may add up to an additional 0.004" in thickness. HW (Half-Wrap) W T L MADE IN AMERICA 8033 Rev A 0604 9 Mini MSR Series Resistors Style Type Case Size MSR 96 0201 84 0202 66 0203 98 0302 91 0303 10 0404 Length Width Thickness1 Pad Width 0.022 0.002 0.012 0.002 0.007 0.002 0.005 0.002 (0.559 0.051) (0.305 0.051) (0.178 0.051) (0.127 0.051) 0.022 0.002 0.020 0.002 0.007 0.002 0.005 0.002 (0.559 0.051) (0.508 0.051) (0.178 0.051) (0.127 0.051) 0.025 0.002 0.030 0.002 0.012 0.003 0.006 0.002 (0.635 0.051) (0.762 0.051) (0.305 0.076) (0.152 0.051) 0.030 0.002 0.020 0.002 0.012 0.003 0.006 0.002 (0.762 0.051) (0.508 0.051 (0.305 0.076) (0.152 0.051) 0.028 0.002 0.030 0.002 0.012 0.003 0.006 0.002 (0.711 0.051) (0.762 0.051) (0.305 0.076) (0.152 0.051) 0.035 0.002 0.035 0.002 0.012 0.003 0.009 0.002 (0.889 0.051) (0.889 0.051) (0.305 0.076) (0.229 0.051) Length Width Thickness1 Pad Width 0.040 0.002 0.020 0.002 0.013 0.003 0.009 0.002 (1.016 0.051) (0.508 0.051) (0.330 0.076) (0.229 0.051) 0.048 0.002 0.023 0.002 0.013 0.003 0.010 0.002 (1.219 0.051) (0.584 0.051) (0.330 0.076) (0.254 0.051) 0.045 0.002 0.030 0.002 0.013 0.003 0.011 0.002 (1.143 0.051) (0.762 0.051) (0.330 0.076) (0.279 0.051) 0.050 0.002 0.040 0.002 0.013 0.003 0.011 0.002 (1.270 0.051) (1.016 0.051) (0.330 0.076) (0.279 0.051) 0.048 0.002 0.048 0.002 0.013 0.003 0.009 0.002 (1.219 0.051) (1.219 0.051) (0.330 0.076) (0.229 0.051) 0.060 0.002 0.030 0.002 0.013 0.003 0.010 0.002 (1.524 0.051) (0.762 0.051) (0.330 0.076) (0.254 0.051) 0.060 0.002 0.040 0.002 0.018 0.003 0.013 0.002 (1.524 0.051) (1.016 0.051) (0.457 0.076) (0.330 0.051) Inches (mm) Inches (mm) Inches (mm) Inches (mm) 1 Solder may add up to an additional 0.004" in thickness. MSR Series Resistors Style Type Case Size MSR 20 0402 81 0502 56 0503 19 0504 82 0505 93 0603 61 0604 Inches (mm) Inches (mm) Inches (mm) Inches (mm) 1 Solder may add up to an additional 0.004" in thickness. 10 E-mail: msithick@mini-systemsinc.com Web site: http://www.Mini-SystemsInc.com MADE IN AMERICA 8020 Rev B 0604 MSR Series Resistors Style Type Case Size MSR 86 0805 5 1002 83 1005 90 1010 87 1206 94 1210 97 1218 80 1505 88 2010 85 2307 89 2512 68 3939 30 5024 28 6632 26 6645 Length Width Thickness1 Pad Width 0.075 0.002 0.048 0.002 0.018 0.003 0.013 0.002 (1.905 0.051) (1.219 0.051) (0.457 0.076) (0.330 0.051) 0.100 0.002 0.025 0.002 0.013 0.003 0.016 0.002 (2.540 0.051) (0.635 0.051) (0.330 0.076) (0.406 0.051) 0.098 0.002 0.048 0.002 0.018 0.003 0.013 0.002 (2.489 0.051) (1.219 0.051) (0.457 0.076) (0.330 0.051) 0.098 0.002 0.098 0.002 0.018 0.003 0.012 0.002 (2.489 0.051) (2.489 0.051) (0.457 0.076) (0.305 0.051) 0.121 0.002 0.061 0.002 0.018 0.003 0.015 0.002 (3.073 0.051) (1.549 0.051) (0.457 0.076) (0.381 0.051) 0.120 0.002 0.098 0.002 0.018 0.003 0.015 0.002 (3.048 0.051) (2.489 0.051) (0.457 0.076) (0.381 0.051) 0.115 0.002 0.179 0.002 0.030 0.005 0.022 0.002 (2.921 0.051) (4.547 0.051) (0.762 0.127) (0.559 0.051) 0.150 0.002 0.048 0.002 0.018 0.003 0.012 0.002 (3.810 0.051) (1.219 0.051) (0.457 0.076) (0.305 0.051) 0.204 0.002 0.096 0.002 0.018 0.003 0.017 0.002 (5.182 0.051) (2.438 0.051) (0.457 0.076) (0.432 0.051) 0.223 0.002 0.073 0.002 0.018 0.003 0.016 0.002 (5.664 0.051) (1.854 0.051) (0.457 0.076) (0.406 0.051) 0.250 0.002 0.122 0.002 0.027 0.003 0.017 0.002 (6.350 0.051) (3.099 0.051) (0.686 0.076) (0.432 0.051) 0.386 0.002 0.386 0.002 0.030 0.005 0.040 0.002 (9.804 0.051) (9.804 0.051) (0.762 0.127) (1.016 0.051) Inches (mm) Inches (mm) Inches (mm) Inches (mm) 0.494 0.002 0.243 0.002 0.030 0.005 0.053 0.002 (12.548 0.051) (6.172 0.051) (0.762 0.127) (1.346 0.051) 0.666 0.002 0.328 0.002 0.030 0.005 0.063 0.002 (16.916 0.051) (8.331 0.051) (0.762 0.127) (1.600 0.051) 0.666 0.002 0.495 0.002 0.030 0.005 0.063 0.002 (16.916 0.051) (12.573 0.051) (0.762 0.127) (1.600 0.051) 1 Solder may add up to an additional 0.004" in thickness. MSR (Top Contact) W T L MADE IN AMERICA 8020 Rev B 0604 11