DTA114E series Datasheet PNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors) Outline Parameter Value VCC 50V 100mA 10k 10k IC(MAX.) R1 R2 VMT3 EMT3F OUT OUT IN IN GN GN DTA114EM DTA114EEB (SC-89) (SC-105AA) EMT3 Features 1) Built-In Biasing Resistors, R1 = R2 = 10k. UMT3F OUT OUT IN GND IN GN 2) Built-in bias resistors enable the configuration of an inverter circuit without connecting external DTA114EE SOT-416 (SC-75A) input resistors (see equivalent circuit). UMT3 3) The bias resistors consist of thin-film resistors OUT with complete isolation to allow negative biasing of the input. They also have the advantage of IN GND completely eliminating parasitic effects. 4) Only the on/off conditions need to be set for DTA114EUA SOT-323 (SC-70) operation, making the circuit design easy. 5) Complementary NPN Types Available.(DTC114E series) 6) Complex transistors :EMB11/ UMB11N/ IMB11A/ Inner circuit UMA9N/ FMA9A PNP type 7) Lead Free/RoHS Compliant. DTA114EUB (SC-85) SMT3 OUT IN GND DTA114EKA SOT-346 (SC-59) OUT R1 IN R2 Application GND(+) Switching circuit, Inverter circuit, Interface circuit, Driver circuit OUT IN GND(+) Packaging specifications Basic Reel size Tape width ordering (mm) (mm) unit (pcs) Package Package size (mm) Taping code DTA114EM VMT3 1212 T2L 180 8 8,000 14 DTA114EEB EMT3F 1616 TL 180 8 3,000 14 EMT3 1616 TL 180 8 3,000 14 DTA114EUB UMT3F 2021 TL 180 8 3,000 14 DTA114EUA UMT3 2021 T106 180 8 3,000 14 DTA114EKA SMT3 2928 T146 180 8 3,000 14 Part No. DTA114EE www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 1/10 Marking 2012.02 - Rev.E Data Sheet DTA114E series Absolute maximum ratings (Ta = 25C) Parameter Symbol Values Unit Supply voltage VCC 50 V Input voltage VIN 40 to 10 V Output current IO 50 mA IC(MAX.)*1 100 mA 150 mW 200 mW Tj 150 C Tstg 55 to 150 C Collector current Power dissipation DTA114EM DTA114EEB DTA114EE PD *2 DTA114EUB DTA114EUA DTA114EKA Junction temperature Range of storage temperature Electrical characteristics(Ta = 25C) Parameter Symbol Conditions Min. Typ. Max. Unit VI(off) VCC = 5V, IO = 100A - - 0.5 VI(on) VO = 0.3V, IO = 10mA 3 - - VO(on) IO / II = 10mA / 0.5mA - 0.1 0.3 V VI = 5V - - 0.88 mA IO(off) VCC = 50V, VI = 0V - - 0.5 A DC current gain GI VO = 5V, IO = 5mA 20 - - - Input resistance R1 - 7 10 13 k Resistance ratio R2/R1 - 0.8 1 1.2 - - 250 - MHz Input voltage Output voltage Input current Output current Transition frequency II fT *1 VCE = 10V, IE = 5mA, f = 100MHz V *1 Characteristics of built-in transistor *2 Each terminal mounted on a reference footprint www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 2/10 2012.02 - Rev.E Data Sheet DTA114E series Electrical characteristic curves(Ta = 25C) Fig.2 Output current vs. input voltage (OFF characteristics) Fig.1 Input voltage vs. output current (ON characteristics) -10m -100 -10 Ta = -40oC 25oC 100oC -5 -2 -1 -500m -200m -100m -100 -200 -500 -1m -2m -5m -10m -20m -1m -500 -200 -20 -10 -5 -2 -1 -50m -100m 0 300A 500 280A 260A 200 240A -30 220A 200A 180A -20 160A 140A -10 120A 100A 0 0A 0 -5 -10 OUTPUT VOLTAGE : VO [V] www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. -1.5 -2.0 -2.5 -3.0 1k DC CURRENT GAIN : GI -40 -1.0 Fig.4 DC current gain vs. output current II= Ta=25C -0.5 INPUT VOLTAGE : VI(off)[V] Fig.3 Output current vs. output voltage -50 Ta = 100oC 25oC -40oC -100 -50 OUTPUT CURRENT : IO [A] OUTPUT CURRENT : IO [mA] Vcc = -5V -2m -20 OUTPUT CURRENT : IO [A] INPUT VOLTAGE : VI(on) [V] -5m VO = -0.3V -50 100 Ta = 100oC 25oC -40oC VO = -5V 50 20 10 5 2 1 -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO [A] 3/10 2012.02 - Rev.E Data Sheet DTA114E series Electrical characteristic curves(Ta = 25C) Fig.5 Output voltage vs. output current -1 OUTPUT VOLTAGE : VO(on) [V] -500m -200m Ta = 100oC 25oC -40oC IO/II = 20 -100m -50m -20m -10m -5m -2m -1m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO [A] www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 4/10 2012.02 - Rev.E Data Sheet DTA114E series Dimensions (Unit : mm) D VMT3 c A e b Lp H E L b1 x S A A1 l1 A e1 l1 b3 S e b2 Patterm of terminal position areas DIM A A1 b b1 c D E e HE L Lp x DIM e1 b2 b3 l1 MILIMETERS MIN MAX 0.45 0.55 0.00 0.10 0.17 0.27 0.27 0.37 0.08 0.18 1.10 1.30 0.70 0.90 0.40 1.10 1.30 0.10 0.30 0.20 0.40 0.10 MILIMETERS MIN MAX 0.80 0.37 0.47 0.50 INCHES MIN 0.018 0 0.007 0.011 0.003 0.043 0.028 MAX 0.022 0.004 0.011 0.015 0.007 0.051 0.035 0.02 0.043 0.004 0.008 - 0.051 0.004 INCHES MIN MAX 0.03 - 0.015 0.019 0.02 Dimension in mm/inches www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 5/10 2012.02 - Rev.E Data Sheet DTA114E series Dimensions (Unit : mm) D A x S A HE E L Lp EMT3F b c e A1 e1 l1 A A2 e S b2 Patterm of terminal position areas DIM A A1 A2 b c D E e HE L Lp x DIM e1 b2 l1 MILIMETERS MIN MAX 0.65 0.85 0.00 0.10 0.60 0.80 0.21 0.36 0.08 0.18 1.50 1.70 0.76 0.96 0.50 1.50 1.70 0.37 0.35 0.55 0.10 MILIMETERS MIN MAX 1.05 0.46 0.65 INCHES MIN MAX 0 0.024 0.008 0.003 0.059 0.03 0.004 0.031 0.014 0.007 0.067 0.038 0.02 0.059 0.067 0.015 0.014 - 0.022 0.004 INCHES MIN - MAX 0.041 0.018 0.026 Dimension in mm/inches www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 6/10 2012.02 - Rev.E Data Sheet DTA114E series Dimensions (Unit : mm) D EMT3 A b1 c Lp L1 HE E Q e b A3 x S A A1 l1 A e1 l1 b3 S e b2 Patterm of terminal position areas DIM A A1 A3 b b1 c D E e HE L1 Lp Q x DIM e1 b2 b3 l1 MILIMETERS MIN MAX 0.60 0.80 0.00 0.10 0.25 0.15 0.30 0.25 0.40 0.10 0.20 1.50 1.70 0.70 0.90 0.50 1.40 1.80 0.10 0.15 0.05 0.25 0.10 MILIMETERS MIN MAX 1.10 0.40 0.50 0.70 INCHES MIN 0.024 0 MAX 0.031 0.004 0.01 0.006 0.01 0.004 0.059 0.028 0.012 0.016 0.008 0.067 0.035 0.02 0.055 0.004 0.006 0.002 - 0.071 0.01 0.004 INCHES MIN MAX 0.04 - 0.016 0.02 0.028 Dimension in mm/inches www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 7/10 2012.02 - Rev.E Data Sheet DTA114E series Dimensions (Unit : mm) D A x b S A HE E L Lp UMT3F e c S l1 A1 e1 A A2 e b2 Patterm of terminal position areas DIM A A1 A2 b c D E e HE L Lp x DIM e1 b2 l1 MILIMETERS MIN MAX 0.85 1.05 0.00 0.10 0.80 1.00 0.27 0.42 0.08 0.18 1.90 2.10 1.15 1.35 0.65 2.00 2.20 0.425 0.43 0.63 0.10 MILIMETERS MIN MAX 1.47 0.52 0.83 INCHES MIN 0.033 0 0.031 0.011 0.003 0.075 0.045 MAX 0.041 0.004 0.039 0.017 0.007 0.083 0.053 0.03 0.079 0.087 0.02 0.017 - 0.025 0.004 INCHES MIN MAX 0.058 - 0.02 0.033 Dimension in mm/inches www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 8/10 2012.02 - Rev.E Data Sheet DTA114E series Dimensions (Unit : mm) D UMT3 A c e b x Lp L1 HE E Q A3 S A e1 l1 A1 A e S b2 Patterm of terminal position areas DIM A A1 A3 b c D E e HE L1 Lp Q x DIM e1 b2 l1 MILIMETERS MIN MAX 0.80 1.00 0.00 0.10 0.25 0.15 0.30 0.10 0.20 1.90 2.10 1.15 1.35 0.65 2.00 2.20 0.20 0.50 0.25 0.55 0.10 0.30 0.10 INCHES MIN 0.031 0 MAX 0.039 0.004 0.01 0.006 0.004 0.075 0.045 0.012 0.008 0.083 0.053 0.03 0.079 0.008 0.01 0.004 - MILIMETERS MIN MAX 1.55 0.50 0.65 0.087 0.02 0.022 0.012 0.004 INCHES MIN MAX 0.06 - 0.02 0.026 Dimension in mm/inches www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 9/10 2012.02 - Rev.E Data Sheet DTA114E series Dimensions (Unit : mm) D SMT3 A c Lp L1 E HE Q e A3 b x S A A1 l1 A e1 e S b2 Patterm of terminal position areas DIM A A1 A3 b c D E e HE L1 Lp Q x y MILIMETERS MIN MAX 1.00 1.30 0.00 0.10 0.25 0.35 0.50 0.09 0.25 2.80 3.00 1.50 1.80 0.95 2.60 3.00 0.30 0.60 0.40 0.70 0.20 0.30 0.10 0.10 DIM e1 b2 l1 MILIMETERS MIN MAX 2.10 0.60 0.90 INCHES MIN 0 MAX 0.051 0.004 0.01 0.014 0.004 0.11 0.059 0.02 0.01 0.118 0.071 0.04 0.102 0.012 0.016 0.008 - 0.118 0.024 0.028 0.012 0.004 0.004 INCHES MIN MAX 0.08 - 0.024 0.035 Dimension in mm/inches www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. 10/10 2012.02 - Rev.E Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. R1120A