QPL Active Delay Lines (TTL)
nActive 5 tap, 14-pin DIP delay lines qualified to MIL-D-83532.
nEstablished reliability assured through a fully approved program in
accordance with MIL-STD-790.*
nStandard total delay values ranging from 25 to 500 ns and tap delay
values from 5 to 100 ns.
nOther military part numbers with non-standard delay values
available upon request.
nQPL JAN I.C.’s (in accordance with MIL-M-38510) incorporated
in all active delay lines.
nAll units transfer molded for maximum reliability.
nPulse Specialty Components - the first delay line supplier to be QPL’d.
*Reliability Assurance Program for Electronic Parts Specifications
TWO PEARL BUCK COURT
l
BRISTOL, PA 19007-6812
l
TEL 215-781-6400
l
FAX 215-781-6403
l
www.pulsespecialty.com
MILITARY
PART NO. TECHNITROL
P ART NO . T A P DEL AYS (n s ) TRR+*
T
DD
1 T
DD
2 T
DD
3 T
DD
4 T
DD
5
M83532/02A001A TTLDL0257JY 5.0 10.0 15.0 20.0 25.0 4.0
M83532/02A006A TTLDL0507JY 10.0 20.0 30.0 40.0 50.0 4.0
M83532/02A011A TTLDL0757JY 15.0 30.0 45.0 60.0 75.0 4.0
M83532/02A014A TTLDL1007JY 20.0 40.0 60.0 80.0 100.0 4.0
M83532/02A015A TTLDL1257JY 25.0 50.0 75.0 100.0 125.0 4.0
M83532/02A016A TTLDL1507JY 30.0 60.0 90.0 120.0 150.0 4.0
M83532/02A018A TTLDL2007JY 40.0 80.0 120.0 160.0 200.0 4.0
M83532/02A020A TTLDL2507JY 50.0 100.0 150.0 200.0 250.0 4.0
M83532/02A026A TTLDL5007JY 100.0 200.0 300.0 400.0 500.0 5.0
ACTIVE MIL-D-83532 QPL DEL AY LINES (TTL LOGIC)
NOTE: Additional slash numbers from 02A001A through 02A029A available upon request.
*Measured @ Vcc = 5.0V, 25oC, with 50pf load to ground and 500 ohms to Vcc
First QPL’d
delay lines.
.810 MAX
.400
MAX
.360
MAX
.125 MIN
.200 MAX
.020 + .002
.100 + .010
NONCUMULATIVE
.600
.105 + .015
4 PLACES
.015
MIN
STANDOFF
HEIGHT
1 2 3 4 5 6 7
14 13 12 11 10 9 8
.060
MAX. .300
+.010
.007
.012
TWO PEARL BUCK COURT
l
BRISTOL, PA 19007-6812
l
TEL 215-781-6400
l
FAX 215-781-6403
l
www.pulsespecialty.com
SCHEMATICMECHANICAL OUTLINE
Notes
nOnly the pins specified in the schematics
are provided with each package.
nPin numbers shown are for reference only
and are not necessarily marked on unit.
nLead material is electro tin plated
(alloy 42) or solder dipped.
nAll specifications are subject to change
without notice.
