FRS: UDA 1335 USB_CODEC Version: Pg. 4/7
PLR-10239
4AE400 FRS: UDA 1335 USB_CODEC .... ... .....
n.a.
n.a.
n.a.
Name: Herman
D’HAESELEER 7 193 - 4 10 A4
PL Or. date : 29-07-97 Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND
4.10.2 Configuration Map 1
Main Features:
• Audio Playback configuration with No DBB and Clipping prevention on (no distortion)
• Audio Input configuration two Analog Input (with selector)
• With HID, no external port expander
• Mute function on codec
• Volume Up and Down
• Self powered
• Powerup time for amp = 20mSec (x time = 1)
• Time between play and mute = 5Sec (y time = 5)
• Don’t go into standb y (z time = 0)
• Default volume = -32dB
• Vendor ID = Philips
• Microphone is preferred state
• Manufactor = Philips Electronics
• Product = USB Audio Playback and Recording System
• Gain setting for mike = 27dB and line = 0dB
Value
Hex Affects Comment
00 Clockshop control Register 1000
00 Rstgen and PLL control Register 1001
00 Power Control Register 1003
8B ASR _UDAO Reg. Register 2000
36 PGA control Anal. Input Terminal 1 Register 800
09 PGA control Anal. Input Terminal 2 Only for Interface 2 Analog configuration
5C ADIF Control Register 801
60 ADAC feature setting (Reg0) via L3
90 ADAC lock mode (Reg1)via L3
80 I/O-Selection register
bit 7 : Clipping preventio n
bit 6 : Expander
bit 5 : Selector o utp ut
bit 4 : Mute/Standb y (Expander)
bit 3 : Mute/Standby (Codec)
bit 2 : outp ut pin 3
bit 1 : outp ut pin 2
bit 0 : outp ut pin 1
1 = Clipping prevention on
0 = external I2C expander not used
0 = normal logic for outputs
0 = Mute
0 = Mute
0 = non Inverted logic for outputp i n 3
0 = non Inverted logic for outputp i n 2
0 = non Inverted logic for outputp i n 1
00 Output pin function 1 Functions are available if declared in ADC
0 = Mute LED according Mute function in ADC
1 = DBB LED according BB function in ADC
00 Output pin function 2 Functions are available if declared in ADC
0 = Mute LED according Mute function in ADC
1 = DBB LED according BB function in ADC
00 Output pin function 3 Functions are available if declared in ADC
0 = Mute LED according Mute function in ADC
1 = DBB LED according BB function in ADC
22 IIS selector
bit 7 : Output I2S
bit 6 : Output I2S 4 or 6 pins
bit 5 : HID
bit 4 :
0 = analog, no I2S and bit 6 not used
1 = HID included