has wiring details. Connect the two outer ground wires both to ground, the two 'VCC' wires
both to 5VDC power, and read the analog signal from the Vo wire. The analog voltage out will
range from 3V when an object is about 100cm away and 1.4V when the object is 500cm away.
For a full graph, showing the distance to analog range, check the datasheet below.
These sensors tend to be a little noisy, we suggest soldering/connecting the included 220uF
capacitor to the same place you connect the wires, to provide some filtering on the power
supply. Connect the + pin of the capacitor to the Vcc wire connection, and the - pin of the
capacitor to the GND wire connection.
For more information, please see the datasheet!
IR Distance Sensor - Includes Cable (100cm-500cm) (12:37)
TECHNICAL DETAILS
Dimensions:
Dimensions: 58mm x 17.6mm x 22.5mm
Weight: 11g with cable
One 4.2mm diameter mounting hole. For more information, please see the datasheet!