alin Ceo ee Analyzer |/O Cable Assemblies - METCONNECT Analyzer I/O Cable Assemblies Product Facts :: AMPTRAC Connectivity Management System 1/0 Cable Assemblies are available with the following connectors + 2.0mm AMPMODU connector - Available for use with the analyzer - 6-position modular plug (R11) connector - 6-position 2.54 mm MTE connector + HD22 connector -- 110 Plug and Play connector :: All 24-conductor I/O cables come with molded boots on both ends . Alll/O cables come with molded boots on the analyzer connector end :. 1/0 Cable Assemblies are Non-Plenum (CM rated) and Listed 110 Plug and Play Cable Assembly Analyzer Monitored Device Connector Type Application Clumber of Figure Part Number None, used for IDC Cat 5e, Cat 6, MT-RJ, LC 24 = 1435844-X AMP C Patch I . - . - Analyzer (DB25) TRAC Patch Panel 770 -Plug & Play Cat Se, Cat 6, MT-RJ, LC 24 A 1499656-Y y PCB Sensor 2.0 mm, AMPMODU_ LAN Switches, Cat6 Shielded 24 - 1435845-Y MRJ21 Patch Panel HD22 MRJ21, Cat 6 Shielded 24 B 1499507-Y 16 - 1499686-Y PCB Sensor 2.0 mm, AMPMODU LAN Switches, Cat6 Shielded 12 _____1499687-Y__ 20 AMPMODU t _8 = _ __1499688-Y | ns ie 6 = 1499689-Y natyzer using Cassettes 6-Position, RJ11 MT-RJ, LC 6 = 1499684 Adapter (1499641-1) a. Duplex SC 6-Position, Duplex SC Adapter Plates 6 _ 1499685-Y 2.5mm MTE and Cassettes PCB Sensor 2.0 mm, AMPMODU LAN Switches, Cat6 Shielded 2 - 1499690-Y X denotes length in feet: -7 = 7, 1--4 = 14, 5--0 = 50, 9--9 = 100 (Note: Can be cut to length} Y denotes length in feet: -4 = 4, -7 = 7, 1--0 = 10, 1--4 = 14, 2--5 = 25, 5--0 = 50, 7--5 = 75, 9--9 = 100 Adapter, DB25 to 2.0 mm AMPMODU Product Facts PART NUMBER 1499641-1 :. For use with 2.0 mm AMPMODU connectors less than 24 position :: Allows for side-by-side connections of multiple 2.0 mm AMPMODU connectors : Allows for use of all analyzer ports : Built-in strain relief and cable management 110 Plug and Play Kit Product Facts PART NUMBER 1479960-1 :. Used with 1/0 Cable Assembly part number 1435844 : Easy to lace and field terminate (no special tools required) : Built-in latches and orientation features INALSAS LNAINADVNVW ALIAILLOANNOD DVYHLdUINVY www.ampnetconnect.com