METRIC Catalogue 1654742 Rast 5 Dimensions are millimetres over inches Revised 5-04 Table of Contents AMP multifitting Mark II Introduction .......................................................................................2002 Direct and Indirect Connection 5.0mm Centerline.......................................2003 Derating Curves .................................................................................2004 Keying Plan and Cable Exit ..................................................................2005 Technical Features ..............................................................................2006 Direct Mating Connector System ...................................................2007, 2008 Indirect Mating Connector System...................................................2009-2011 PC Board Frame .................................................................................2012 2 Rast 5 AMP MONO-SHAPE Introduction .......................................................................................2013 Connector Versions ...........................................................................2014 Tab Connectors .................................................................................2015 Tab Connectors Keying Plan ...............................................................2016 Tab Connector 3-10 Positions ......................................................2017-2020 Single Way Connectors ........................................................................2021 Single Way Connectors Keying Plan ......................................................2022 PCB Connectors ........................................................................2023-2027 Satellite Connectors ...........................................................................2028 Satellite Connectors Keying Plan............................................................2029 Bridge Connectors Keying Plan ............................................................2030 AMP MONO-SHAPE Mark II Introduction .......................................................................................2031 Technical Data .................................................................................2032 Keying Plan and Cable Exit ..................................................................2033 Tab Connector System ...............................................................2034-2035 TAB-BRIDGE Connector System - Short Circuit .......................................2036 PCB Connector System ...............................................................2037-2041 Application Tooling .....................................................................2042-2045 Standard Timer Introduction ....................................................................................... 2046 Interior and Exterior Locking ..................................................................2047 Keying Plan .......................................................................................2048 Housings .................................................................................2049-2059 Connectors and Contacts .....................................................................2060 2001 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Introduction Product Features Direct Mating Connectors for PC Boards, 2-8 Positions, up to 6 A Current Carrying Capacity Indirect Mating Connectors, 1-8 Positions, up to 16 A Current Carrying Capacity Variable Keying Double Wire Termination possible Tyco Electronics' newly designed AMP multifitting Mark II Connector System was developed according to the latest connector design standards. The requirements of advanced In-Line mating technology for the components and contacts of pc boards are incorporated in the direct and indirect versions of these connector systems. This system is suitable for a wide wire size range. Current carrying capacity is 16 A maximum. Double termination is possible with 0.5 and 0.5 mm2 or 0.5 and 0.75 mm2 conductors. The connectors are available in 1- to 8-positions (indirect) resp. 2- to 8positions (direct) with an exterior locking device. Interior locking options are available on request. Supplied in chain and provided with all keying and polarisation ribs, the connectors can be operated economically with modern Application Tooling Equipment. 2002 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Direct and Indirect Mating Connection, 5.0 mm Centerline Direct Mating Connection, 5.0 mm Centerline 4 3 1 Double Wire Exit 2 Wire Exit 90 2 3 Wire Exit 180 Rast 5 4 Cover 5 Exterior Locking Latch 6 Keying 5 1 7 Polarisation 2 7 Indirect Mating Connection, 5.0 mm Centerline 6 4 3 1 Double Wire Exit 2 Wire Exit 90 3 Wire Exit 180 4 Cover 5 Exterior Locking Latch 6 Keying 1 5 7 Polarisation Indirect Mating Connection with Interior Locking, 5.0 mm Centerline 6 2 7 3 4 1 Double Wire Exit 2 Wire Exit 90 3 Wire Exit 180 4 Cover 5 Interior Locking Latch 1 6 Keying 2 7 Polarisation 5 6 7 2003 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Derating Curves Direct Mating Connector System I /A 7 6 Connector: 8 positions Current 5 Material: Brass, tin plated 4 3 2 Wire: 0.5 mm2 1 PC Board: FR4, 2 x 0.35 m Copper, tin plated t/C 0 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature Indirect Mating Connector System I /A / 3 10 9 8 Material: Brass, tin plated Curve 1: 2 positions 7 2 Wire: 0.5 mm2 (Curve 1 and 2) 1.0 mm2 (Curve 3) 1 Curve 2: 8 positions Current 6 5 Curve 3: 4 positions 4 Mating Part: 6.3 x 0.8 mm Tab, Brass, tin plated 3 2 1 t/ /C / 0 0 20 40 60 80 100 120 Ambient Temperature Indirect Mating Connector System I /A 18 2 1 16 Curve 1: 1 position 14 Material: CuNi2Si, silver plated Curve 2: 4 positions 12 Current Wire: 1.5 mm2, tin plated Mating Part: 6.3 x 0.8 mm Tab, Brass, tin plated 10 8 6 4 2 t/C 0 0 20 40 60 80 100 120 140 Ambient Temperature 2004 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan and Cable Exit Keying Plan from Mating Direction, Fully-Keyed Version 3 c 3 Polarisation Rib -5- -4- -3- 2 Keying Rib 2 d 1 Locking Latch -2- a - 1 -b 4 Rast 5 4 Cavity Number 1 2 -5- -4- -3- c d This final keying version will be produced on the Application Tooling Equipment. - 2 -b -1- Keyed Version: 05-C according RAST 5 Cable Exit with Interior and Exterior Locking Cable Exit with Interior Locking Cable Exit with Exterior Locking Direct Mating of a PCB with PC Board Frames 2005 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Technical Features Technical Data Centerline: 5.0 mm Housing Material: Polyamide, PA 6.6 and PA 6 Standard Colour: Natural Current Voltage: 250 V ~ Air and Creepage Distance: >3.2 mm Flammability Rating: UL 94 V-2 Approvals: VDE, UL Direct Mating Connectors Indirect Mating Connectors No. of Positions: 2- to 8-positions Contact Material: Brass Contact Finish: Tin plated Wire Size Range: 0.35-1.0 mm2 Temperature Range: -40 C up to +105 C Current Rating: 6 A max. Insulation Diameter: 2.8 mm max. Insulation Resistance: >10 M Mating Force: 7 N per contact* Unmating Force: 1.5 N* Product Specification: 108-18653 Application Specification: 114-18289 *) measured with polished steel No. of Positions: 1- to 8-positions Contact Material: Brass / CuNi2Si Contact Finish: Tin plated / silver plated Wire Size Range: 0.35-1.0 mm2 / 1.0-1.5 mm2 Temperature Range: -40 C up to +130 C Current Rating: 10 A, up to 4 contacts 16 A Insulation Diameter: 3.0 mm max. Insulation Resistance: >10 M Mating Force: 6.5 N per contact** Unmating Force: 1.5 N** Product Specification: 108-18652 Application Specification: 114-18288, 114-18382 **) measured with polished steel plate 1.5 mm thickness tab 6.3 x 0.8 mm 2006 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Direct Mating Connector System Technical Data Wire Size Range: 0.35-1.0 mm2 Current Carrying Capacity (max.): 6A Part Numbers with Exterior Locking PA 6.6 PA 6 * 1-1241172-2 1-1534075-2 Package Quantity Part Numbers with Interior Locking PA 6.6 PA 6 * 4,900 - - 1-1534075-3 3,136 - - 1-1534075-3 3,136 - - 1-1534075-4 2,352 - - 1-1534075-4 2,352 - - 1-1534075-5 1,960 - - 1-1534075-5 1,960 - - 2 -4- -5- -5- -4- -3- -3- -4- -4- -3- -2- -2- -3- -3- -3- -1- -2- -2- -2- 1-1241172-5 -2- 1-1241172-4 -1- 1-1241172-4 -1- -1- 1-1241172-3 -1- 1-1241172-3 -1- -2- Rast 5 -1- RAST 5 Version 1-1241172-5 *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2007 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Direct Mating Connector System (continued) Technical Data Wire Size Range: 0.35-1.0 mm2 Current Carrying Capacity (max.): 6A Part Numbers with Exterior Locking -6- -6- -6- -8- -8- -7- -7- -7- -7- -5- -5- -5- -6- -6- -6- -6- -4- -4- -4- -5- -5- -5- -5- -3- -3- -3- -4- -4- -4- -4- -2- -2- -3- -3- -3- -3- -2- 1-1241172-8 -2- -2- -1- 1-1241172-7 -1- 1-1241172-7 -2- 2-1241172-6 -1- 1-1241172-6 -1- 1-1241172-6 -2- 1-1534075-6 -1- PA 6* -1- PA 6.6 -1- RAST 5 Version 1-1241172-8 Package Quantity Part Numbers with Interior Locking PA 6.6 PA 6 * 1,568 - - 1-1534075-6 1,568 - - 2-1534075-6 1,568 - - 1-1534075-7 1,372 - - 1-1534075-7 1,372 - - 1-1534075-8 1,176 - - 1-1534075-8 1,176 - - *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2008 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Indirect Mating Connector System Technical Data Wire Size Range: 0.35-1.0 mm2 Part Numbers with Exterior Locking -3- -5- -5- -4- -4- -4- -4- -3- -3- -3- -3- -2- -2- -2- 1-1241170-5 -2- 1-1241170-4 -1- 1-1241170-4 -1- -1- 1-1241170-3 -1- 1-1241170-3 -3- -2- 1-1241170-2 -2- 1-1534072-1 -2- 1-1241170-1 -1- PA 6 * -1- PA 6.6 1-1241170-5 Part Numbers with Interior Locking Package Quantity PA 6.6 PA 6 * 9,604 -1241170-1 1-1534072-1 1-1534072-2 4,900 1-1394355-2 1-1534077-2 1-1534072-3 3,136 1-1394355-3 1-1534077-3 1-1534072-3 3,136 1-1394355-3 1-1534077-3 1-1534072-4 2,352 1-1394355-4 1-1534077-4 1-1534072-4 2,352 1-1394355-4 1-1534077-4 1-1534072-5 1,960 1-1394355-5 1-1534077-5 1-1534072-5 1,960 1-1394355-5 1-1534077-5 2 Rast 5 -1- RAST 5 Version -1- Current Carrying Capacity (max.): 10 A *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2009 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Indirect Mating Connector System (continued) Technical Data Wire Size Range: 0.35-1.0 mm2 Current Carrying Capacity (max.): 10 A Part Numbers with Exterior Locking RAST 5 Version -6- -6- -6- -8- -8- -7- -7- -7- -7- -5- -5- -5- -6- -6- -6- -6- -4- -4- -4- -5- -5- -5- -5- -3- -3- -3- -4- -4- -4- -4- -2- -2- -2- -3- -3- -3- -3- -1- -1- -2- 1-1241170-8 -2- -2- -1- 1-1241170-7 -1- 1-1241170-7 -2- 2-1241170-6 -1- 1-1241170-6 -1- 1-1241170-6 -1- PA 6.6 1-1241170-8 Package Quantity PA 6* Part Numbers with Interior Locking PA 6.6 PA 6* 1-1534072-6 1,568 - - 1-1534072-6 1,568 - - 2-1534072-6 1,568 - - 1-1534072-7 1,372 - - 1-1534072-7 1,372 1394355-7 1534077-7 1-1534072-8 1,176 - - 1-1534072-8 1,176 - - *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2010 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Indirect Mating Connector System (continued) Technical Data Wire Size Range: 1.0-1.5 mm2 Current Carrying Capacity (max.): 16 A Part Numbers with Exterior Locking RAST 5 Version PA 6 * 1-1241171-1 1-1534073-1 1-1241171-2 PA 6.6 PA 6 * 9,604 1--1241171-1 1-1534073-1 1-1534073-2 4,900 1-1394556-2 1-1534078-2 1-1534073-3 3,136 1-1394556-3 1-1534078-3 1-1534073-3 3,136 1-1394556-3 1-1534078-3 1-1534073-4 2,352 1-1394556-4 1-1534078-4 1-1534073-4 2,352 1-1394556-4 1-1534078-4 2 -3- -4- -4- -3- -3- -3- -2- -2- -2- 1-1241171-4 -2- -1- -1- 1-1241171-3 -1- 1-1241171-3 -1- -2- -1- Rast 5 -1- PA 6.6 Part Numbers with Interior Locking Package Quantity 1-1241171-4 *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 2011 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PC Board Frame Latching Hole Keying PC Board Frame PC Board B A No. of Positions 2 4 5 Dimensions (mm) A B 5 10.1 15 20 20.1 25.1 6 25 30.1 7 30 35.1 8 35 40.1 122 55 60.1 Keying Latching Polarisation Additional Board Lock Part Number PC Board Frame, PA 6.6, Black 1c, 2d 1/2 - - 2-964577-2 1c, 2d, 3c 1/2, 3/4 2b - 1-964577-4 1c, 3c, 4d 1/2, 3/4 4b - 2-964577-4 1c, 3c, 4d 1/2, 3/4 1b, 4a - 3-964577-4 3d 1/2, 4/5 - - 1-964577-5 4d 1/2, 5/6 6b - 1-964577-6 4d 1/2, 5/6 1b, 6a - 2-964577-6 2c, 3d, 7c 2/3, 5/6 1b, 2b 4/5 1-964577-7 2c, 3d, 7c 2/3, 5/6 2b, 7a 4/5 2-964577-7 2c, 3d, 7c 2/3, 7/8 2a 4/5 1-964577-8 2c, 3d, 7c 2/3, 7/8 2b, 4b 4/5 2-964577-8 1c, 2d, 3c, 4d, 5c, 8c, 10d, 12d 1/2, 3/4, 5/6, 8/9, 9/10, 11/12 2b, 3a, 4a, 6a, 7a, 7b, 8a, 8b 4/5, 8/9 1-964578-2 Package Quantity 2,200 1,700 1,500 1,500 1,200 1,000 1.500 Preferred Parts are printed bold 2012 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Introduction AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE connectors represent a valid solution to the ever-increasing requirements for production and application flexibility. They are high productivity, great flexibility, quality, minimum applied cost. 2 Rast 5 AMP MONO-SHAPE productline includes a full range of 5.0 mm pitch modular connectors contents with similar outer shape, several variation in the mating area such as PC Board and 6.3 x 0.8 mm tabs (RAST 5), plus a version for harness shunts. AMP MONO-SHAPE connection system adopts the IDC termination technology, which improves application results and quality level. The AMP MONO-SHAPE product range, combined with the performances and properties offered by the termination system, allow to manufacture extremely complicated harness structures while still maintaining high production levels. Technical Features IDC Connector system design to maximise the full integration with the application tooling assuring total flexibility in harness design. The connector incorporates modern in-line mating technology on a 5.0 mm centerline with no loss of spacing and a variety of keying possibilities. High current system, up to 16 Ampere, designed to satisfy several appliance requirements. Wiring faults eliminated through high automation. ID Contact designed to accept standard discrete wires ranging from 0.5 up to 1.5 mm2, according to the connector configuration. Approvals: VDE: 4751-1431-4024 / A 10A and 4751-1431-4024 / A 9E UL E 28476 Vol. 9 Sec. 7; 97 ME 17936; AP-27HB 2013 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 AMP MONO-SHAPE Connector Versions Same Shape Different Applications With the same outside shape four connector versions are available, which are to handle with the same application tooling. TAB Connectors 2-12 position 5.0 mm pitch connectors with insulation displacement contacts mateable with components according to RAST 5 and with tinned copper alloy tab 6.3 x 0.8 mm according to DIN 46244. Wire Size Range: 0.5-1.5 mm2 Current Rating: 16 Ampere max. acc. to wire size LIF version 2 point contact instead of 4 as per standard version -For LIF version up to 10 Ampere max Single Way Connectors Single Way connectors with insulation displacement contacts for use on tinned copper alloy tab 6.3 x 0.8 mm according to DIN 46244. Wire Size Range: 0.5-1.5 mm2 Current Rating: 16 Ampere max. acc. to wire size Supply Status: In order to increase productivity these items are supplied in sticks. PCB Connectors 2-12 position 5.0 mm pitch connectors with insulation displacement contacts according to printed circuit boards with thickness 1.5 0.2 mm and 5.0 mm pitch. Wire Size Range: 0.5-0.75 mm2 Current Rating: 6 Ampere max. acc. to wire size PC Board: Single or both sides printed 5 m tin over 35 m copper Satellite Connectors 3 position connectors, pitch 5.0 mm, with short circuited insulation displacement contacts for harness shunts. Wire Size Range: 0.5-1.5 mm2 Current Rating: 16 Ampere max. acc. to wire size 2014 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB Connector AMP MONO-SHAPE TAB Connector 1 6 1 Cover closed after Wire Insertion. Wire Direction 90. 180 when locked in Cover Recess 2 2 Cavity Numbers Rast 5 2 3 Polarisation similar to the Keying (Located on the Back Side) 3 4 Keying 5 Interior Locking Latch 5 6 Colour Marking 4 Technical Features Centerline: 5.0 mm, according to RAST 5 specifications Configurations: 2- to 12-positions Housing Material: Plastic PA 6.6 Housing Colour: Natural colour for standard version Grey colour for LIF version Contact Material: Copper alloy, post-tinned 2.0 m min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 C) and 750C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 380 V, 4.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Wire Size Range: from 0.5 to 1.5 mm2 Current Rating: Standard Version 16 A max. according to wire size 0.5 mm2 3 A, 0.75 mm2 6 A, 1.0 mm2 10 A, 1.5 mm2 16 A LIF Version 10 A max. according to wire size 0.5 mm2 3 A, 0.75 mm2 6 A, 1.0 mm2 10 A, 1.5 mm2 10 A Rated Voltage: 380 Volts max. Wire Type: H05V-K (70 C max.) or FR 3/2 (105 C max.) for 0.5-1.0 mm2 wires with copper or tinned stranded wires H07V-K (70 C max.) or FR 3/2 (105 C max.) for wires from 1.5 mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 C / 105 C Insulation Diameter Range: 2.0-3.5 mm Temperature Range: -25 C up to +105 C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm2 Application Specification: 114-20016 Product Specification: Standard version: 108-20065 LIF version: 108-20215 Homologations: acc.to VDE File No. 3905 (to 16 A) and UL File No. E28476 (to 14 A) 2015 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan Keying Plan from Mating Direction, 4 5 AMP MONO-SHAPE TAB Connector 1 -7- -6- -4- c c 5 Cavity Number -3- 4 Polarisation Rib -2- 3 Keying Rib d -1- a 2 Slanted Keying Rib - 5 -b 1 Locking Latch 2 3 2 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit On Reel 1-282002-2 2-282002-2 3-282002-2 1-284338-2 2-284338-2 -- 1-282002-1 2-282002-1 2-282002-1 1-284338-1 2-284338-1 -- 1-282002-3 2-282002-3 -- 1-284338-3 2-284338-3 3-284338-3 1-282002-4 2-282002-4 -- 1-284338-4 -- -- 1-282002-5 2-282002-5 1-282002-6 -- -- Loose Piece On Reel 6.500 3.500 28.500 6.500 3.500 28.500 6.500 3.500 28.500 6.500 3.500 -- -- 6.500 3.500 -- 2-282002-6 -- 6.500 3.500 -- 1-282002-7 2-282002-7 3-282002-7 1-284338-7 -- -- 6.500 3.500 28.500 d -1- On Reel -2- d - 2 -b Red c 02-L 02-P -1- c Black d 02-C -1- a Grey c 02-B 02-E 02-F - 2 -b Loose Piece a On Tray 02-A 02-O Blue 02-Q Black -- Black * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 2016 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 3 Position RAST 5 Variations (Variable Keying)* -3- Loose Piece On Reel 1-282003-1 2-282003-1 3-282003-1 1-284339-1 2-284339-1 -- 1-282003-2 2-282003-2 3-282003-2 1-284339-2 2-284339-2 -- 1-282003-3 2-282003-3 -- 1-284339-3 2-284339-3 -- 282233-2 282233-2 -- 1-282003-4 2-282003-4 -- 1-284339-4 2-284339-4 -- 1-282003-5 2-282003-5 -- 1-284339-5 2-284339-5 -- 1-282003-6 2-282003-6 1-282003-7 1-284396-1 On Reel Loose Piece On Reel 4.160 2.500 24.000 4.160 2.500 24.000 4.160 2.500 -- 4.160 2.500 -- 4.160 2.500 -- 4.160 2.500 -- -- 4.160 2.500 -- -- -- 4.160 -- -- -- -- 4.160 -- -- 2 - 3 -b d -2- d c - 2 -b d - 3 -b -2- d c d c -1- On Tray -3- - 3 -b d - 3 -b - 2 -b d -2- c d c -1- c d Grey - 2 -b 03-B 03-K c Red -1- 03-B 03-K d c - c 03-D -1- a Green c 03-F -1- a Blue d c 03-B 03-K c Orange Packaging Unit Rast 5 03-A 03-I Part Numbers RAST 5 Version - 1 -b Suitable for RAST 5 Version Colour Marking -- - 3 -b d - 2 -b d c Black c 03-B -1- Violet -- Black * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 2017 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 4 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers On Reel On Reel Loose Piece On Reel 1-282004-1 2-282004-1 3-282004-1 2.120 2.000 18.750 1-282004-2 2-282004-2 3-282004-2 2.120 2.000 18.750 1-282004-3 2-282004-3 -- 2.120 2.000 -- c d -4- Loose Piece -4- d -3- On Tray -4- d c d c -3- Red c 04-A - 3 -b - 1 -b - 1 -b c Black d c -1- 04-D -2- c Grey -2- d 04-A -2- d RAST 5 Version Packaging Unit 5 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking -5- Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-282005-1 2-282005-1 -- 2.600 1.500 18.750 1-284545-1 -- -- 2.600 1.500 18.750 d - 4 -b d c -3- d c -2- d c -1- RAST 5 Version c Red Part Numbers Red * Final keying version is produced on the Application Tooling Machines. 2018 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 6 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit Loose Piece On Reel On Reel Loose Piece On Reel Violet 1-282006-1 2-282006-2 3-282006-2 2.080 1.200 13.500 -- 1-282006-3 2-282006-3 3-282006-3 2.080 1.200 13.500 Red 1-284745-1 -- -- 2.080 -- -- 2 Rast 5 On Tray 7 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Black -7- Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-282007-1 2-282007-1 -- 1.820 1.200 -- 1-284397-1 -- -- 1.820 1.200 -- d -6- d c - 5 -b -4- d c -3- d c -2- d c - 1 -b c -- Part Numbers RAST 5 Version 2019 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 8 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1.560 900 -- 1.560 900 -- -8- 284085-1 2-284085-1 -- 1-284685-1 2-284685-1 -- 284085-2 2-284085-2 -- d d c -7- a - 6 -b d c -5- d c - 4 -b d c -3- d c d c -1- - 2 -b RAST 5 Version d c c -- Part Numbers Violet * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 10 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Packaging Unit On Tray Loose Piece On Reel 1-282010-1 2-282010-1 -- 1-284686-1 2-284686-1 -- On Reel Loose Piece On Reel 1.300 700 -- - 10 - d -9- d c -8- a -7- d c - 6 -b d c -5- d c -4- -3- d c -2- d c -1- d c c -- Part Numbers RAST 5 Version * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version 2020 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE Single Way Connector Single Way Connector 1 2 1 All Single Way Connectors are supplied in "stick-form" by 6 single ways each. They will be cut from the Application Tooling Machines 2 Rast 5 2 Cover closed after Wire Insertion. Wire Direction 90. 180 when locked in Cover Recess 3 Polarisation similar to the keying of the front side 3 4 Keying 5 Plastic Noses which Lock into the TAB Hole 6 Colour Marking 5 4 Technical Features Centerline: 5.0 mm, according to RAST 5 specifications Configurations: 1 position Housing Material: Plastic PA 6.6 Housing Colour: Natural colour Contact Material: Copper alloy, post-tinned 2.0 m min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 C) and 750C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 380 V, 4.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Wire Size Range: from 0.5 to 1.5 mm2 Current Rating: 16 A max. according to wire size 0.5 mm2 3 A, 0.75 mm2 6 A, 1.0 mm2 10 A, 1.5 mm2 16 A Rated Voltage: 380 Volts max. Wire Type: H05V-K (70 C max.) or FR 3/2 (105 C max.) for 0.5-1.0 mm2 wires with copper or tinned stranded wires H07V-K (70 C max.) or FR 3/2 (105 C max.) for wires from 1.5mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 C / 105 C Insulation Diameter Range: 2.0-3.5 mm Temperature Range: -25 C up to +105 C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm2 Application Specification: 114-20017 Product Specification: 108-20066 Homologations: acc.to VDE File No. 3905 (to 16 A) and UL File No. E28476 (to 14 A) Counter Part: Tab 6.3 x 0.8 mm as per DIN 46244 norms Materials: Copper alloy Finishing: Tinned (6.0 m max.) 2021 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan from Mating Direction Keying Plan 2 a 1 Keying Rib c 3 Cavity Number 3 d -1- 2 Polarisation Rib 1 AMP MONO-SHAPE Single Way Connector 1 Position (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit On Reel On Tray On Reel -- 1-282086-1 1.024 10.500 -- 1-282086-2 1.024 -- -- 1-282086-3 1.024 -- Green -- 1-282086-4 1.024 -- Blue -- 1-282086-5 1.024 -- Violet -- 1-282086-6 1.024 -- d d c - 1 -b c Orange d Black -1- a c -- -1- On Tray 2022 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector PCB Connector 1 1 Cover closed after Wire Insertion. Wire Direction 90. 180 when locked in Cover Recess 2 2 Cavity Numbers Rast 5 2 3 Keying Slot in PC Board 5 4 Locking Hole in PC Board 5 Colour Marking 4 3 Technical Features Centerline: 5.0 mm Configurations: 2-12 positions Housing Material: Plastic PA 6.6 Housing Colour: Natural colour Contact Material: Copper alloy, post-tinned 2.0 m min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 C) and 750C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 240 V, 3.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Wire Size Range: from 0.5 to 0.75 mm2 Current Rating: 6 A max. according to wire size 0.5 mm2 3 A, 0.75 mm2 6 A Rated Voltage: 220 Volts max. Wire Type: H05V-K (70 C max.) or FR 3/2 (105 C max.) for 0.5-1.0 mm2 wires with copper or tinned stranded wires H07V-K (70 C max.) or FR 3/2 (105 C max.) for wires from 1.5mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 C / 105 C Insulation Diameter Range: 2.0-2.8 mm Temperature Range: -25 C up to +105 C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm2 Application Specification: 114-20025 Product Specification: 108-20067 Homologations: acc.to VDE File No. 3905 (to 6 A) and UL File No. E28476 (to 6 A) Printed Circuit Board: Thickness 1.50.2mm Tinned Circuit Paths: 5.0mm pitch and width of 1.8mm 2023 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector PCB Connector Wire Exit 1 1 2 5,0 1 PC Board 2 First Circuit Path 3 3 MONO-SHAPE Connector 4 Wire 23,0 15,0 4 14,0 Notes Concerning the PC Board Layout 4 1 1 First circuit path 2 2 Slot for keying rib in front of first cavity (according to the connector 4.0 mm or 7.4 mm) 3 Bore hole for locking clip symmetric between two cavities (diameter 2.5 mm) 3 4 Slot for keying rib symmetric between two cavities PC Board Layout Dimensions on request. See Customer Drawing 282042 2024 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm No. of Positions Colour Marking Part Numbers PC Board Cut-Out Packaging Unit Loose Piece On Reel On Reel Loose Piece On Reel 1-282042-1 2-282042-1 -- 5.980 3.500 -- 1-282042-2 2-282042-2 3-282042-2 5.980 3.500 28.500 1-282042-3 2-282042-3 3-282042-3 5.980 3.500 28.500 1-282042-4 2-282042-4 -- 5.980 3.500 -- 1-282042-5 2-282042-5 3-282042-5 5.980 3.500 28.500 1-282043-2 2-282043-2 3-282043-2 4.160 2.500 24.000 1-282043-3 2-282043-3 -- 4.160 2.500 -- 282235-2 2-282235-2 -- 4.160 2.500 -- 282235-3 2-282235-3 -- 4.160 2.500 -- 1-1284546-1 -- -- 4.160 -- -- 1-282044-1 2-282044-1 3-282044-1 3.120 2.000 18.750 2 Brown 2 Rast 5 On Tray 2 Green 2 Blue 2 Red 2 Black 3 -- 3 Black 3 -- 3 Black 3 Blue 4 -- 2025 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm (continued) No. of Positions Colour Marking Part Numbers PC Board Cut-Out Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-282045-1 2-282045-1 3-282045-1 2.600 1.500 18.750 1-282045-2 2-282045-2 3-282045-2 2.600 1.500 18.750 1-282045-3 2-282045-3 3-282045-3 2.600 1.500 18.750 1-284733-1 2-284733-1 3-284733-1 2.600 1.500 18.750 1-282046-1 2-282046-1 3-282046-1 2.080 1.200 13.500 1-284734-1 2-284734-1 3-284734-1 2.080 1.200 13.500 1-282047-1 2-282047-1 3-282047-1 1.820 1.200 13.500 284208-1 2-284208-1 -- 1.560 900 -- 284574-1 -- -- 1.560 -- -- 1-282049-1 2-282049-1 3-282049-1 1.300 700 10.500 1-282050-1 2-282050-1 3-282050-1 1.300 700 10.500 5 -- 5 Green 5 -- 5 -- 6 -- 6 -- 7 -- 8 -- 8 -- 9 -- 10 -- 2026 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm (continued) No. of Positions Colour Marking Part Numbers PC Board Cut-Out Packaging Unit Loose Piece On Reel On Reel Loose Piece On Reel 1-284401-1 -- -- 1.300 -- -- 284575-1 -- -- 1.300 -- -- 1-282051-1 2-282051-1 3-282051-1 1.040 700 10.500 1-282052-1 2-282052-1 3-282052-1 1.040 700 10.500 10 Black 2 Rast 5 On Tray 10 -- 11 -- 12 -- 2027 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 AMP MONO-SHAPE Satellite Connector Satellite Connector 1 1 Cover closed after Wire Insertion. Wire Direction 90. 180 when locked in Cover Recess 2 2 Bridge between Contacts to have Short Circuit 3 Cavity Numbers 4 For Satellite version, the cavity 1 only accept TAB contact, other cavities are clogged 3 4 Technical Features Centerline: 5.0 mm, according to RAST 5 specifications Configurations: 3 positions only (for special version please contact Tyco Electronics) Housing Material: Plastic PA 6.6 Housing Colour: Natural colour Contact Material: Copper alloy, post-tinned 2.0 m min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 C) and 750C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 380 V, 4.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Wire Size Range: from 0.5 to 1.5 mm2 Current Rating: 16 A max. according to wire size 0.5 mm2 3 A, 0.75 mm2 6 A, 1.0 mm2 10 A, 1.5 mm2 16 A Rated Voltage: 380 Volts max. Wire Type: H05V-K (70 C max.) or FR 3/2 (105 C max.) for 0.5-1.0 mm2 wires with copper or tinned stranded wires H07V-K (70 C max.) or FR 3/2 (105 C max.) for wires from 1.5mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 C / 105 C Insulation Diameter Range: 2.0-3.5 mm Temperature Range: -25 C up to +105 C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm2 Application Specification: 114-20026 Product Specification: 108-20070 Homologations: acc.to VDE File No. 3905 (to 16 A) and UL File No. E28476 (to 14 A) 2028 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan from Mating Direction 4 Cavity Number - 5 -b 2 c -4- c 3 Polarisation Rib -3- 2 Keying Rib -2- a -1- 1 Locking Latch -7- 3 4 -6- Keying Plan Rast 5 2 1 AMP MONO-SHAPE - 3 Position Satellite Connector (Variable Keying)* -3- Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-282099-1 -- -- 4.160 -- -- d -2- d c Black - 1 -b 03-A 03-I Part Numbers RAST 5 Version c Suitable for RAST 5 Version Colour Marking 02-L 02-P - 2 -b -- -- -- 284288-2 -- -- 3.000 -- 1-284288-3 284288-3 -- 6.500 3.000 -- -- 284288-4 -- -- 3.000 -- -- 284288-5 -- -- 3.000 -- 1-284288-6 284288-6 -- 6.500 3.000 -- -- 284288-7 -- -- 3.000 -- d 6.500 - 2 -b d -1- c d - 2 -b c -1- -- c - 2 -b d - 2 -b -2- -- d 02-C -1- a Black 284288-1 d Violet - 2 -b 02-L 02-P 1-284288-1 d Green -1- 02-L 02-P -1- Blue -1- 02-L 02-P c Orange c 02-L 02-P c -- c 02-L 02-P -1- AMP MONO-SHAPE - 2 Position Satellite Connector (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 to have Short Circuit * Final keying version is produced on the Application Tooling Machines. Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. 2029 Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan from Mating Direction AMP MONO-SHAPE Bridge Connector - 3 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit -3- Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel -- 284289-1 -- -- 2.500 -- d -2- d c Green - 1 -b 03-A 03-I Part Numbers RAST 5 Version c Suitable for RAST 5 Version Colour Marking AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel -- 284290-1 -- -- 1.200 -- -- Green AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 and 3-4 to have Short Circuit Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel -- 284290-2 -- -- 1.200 -- -- Black AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3-4-5-6 to have Short Circuit Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-284744-1 -- -- 2.080 -- -- -- -- * Final keying version is produced on the Application Tooling Machines. 2030 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Introduction AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology MONO-SHAPE Mark II Connector System was developed according to the newest level of knowledge and standard. 2 Rast 5 The requirements of advanced In-Line mating technology for the component and contact of printed circuit board (PCB) is granted by the two versions TAB and PCB connector systems. System is designed to maximise the full integration with the application tooling, assuring the flexibility in the harness design. This system is suitable for a wide wire size range of conductor and current carrying capacity up to 16 A. Double termination is possible with 0.5 and 0.5mm2 or 0.5 and 0.75mm2 conductors. (See application spec. 114-20104 for details) The connectors are available in 1 to 10 positions (TAB Version) with interior locking device and 2 to 12 positions (PCB Version) Connectors are supplied in chain and provided with all keying and polarisation ribs the connectors can be handled automatically with a modern Application Tooling Equipment. Wiring faults checked and eliminated through high automation. Technical Features Housing moulded in different materials for different applications Standard, Part Numbers with pre-dash 0 (as 0-284471-1) Housing in unfilled PA 6/6, UL 94V-2 For UL94V0, Part Numbers with pre-dash 1 (as 1-284471-1) Housing in unfilled PA 6/6, UL 94V-0 High Operating Temperature (up to 130), Part Numbers with pre-dash 2 (as 2284471-1) Unfilled PA 4/6, UL 94V-2 (available for TAB Version only) Glow Wire 750 no flame, Part Numbers with pre-dash 3 (as 3-284471-1) Housing in unfilled PA 6, UL 94V-2 Application Machines shall provide to print a colour code mark on the connectors cover after wire termination, feasible on all connectors configuration, for connector identification on harnesses. 2031 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Technical Data Centerline: 5.0mm Current Voltage: 250 V~ Housing Material: Polyamide, PA 6.6 and PA 6 Air and Creepage Distance: >3.2mm Approvals: VDE, UL CSA applied Flammability Rating: According UL 94 V-2 Standard Colour: Natural TAB Connectors 1-10 position 5.0 pitch connectors with insulation displacement contacts mateable with components according to rast 5 and with tinned copper alloy tab contacts 6.3 x 0.8mm according to DIN 46244 and DIN 17670 Part 1. TAB-BRIDGE Connectors Same design as TAB Connectors but with a bridge between two adjacent contacts to have a Short Circuit between them. Wire Size Range: 0.35-1.5 mm2 Current Rating: 16 Ampere max. acc. to wire size used PCB Connectors 2-12 position 5.0 mm pitch connectors with insulation displacement contacts mateable with printed circuit boards (PCB) Wire Size Range: 0.35-0.75 mm2 Current Rating: 6 Ampere max. acc. to wire size used PC Board: Single or double side, with thickness 1.60.2mm, FR4, 2 x 0.35 m Copper 5m tinned tracks, 5.0mm pitch 2032 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan and Cable Exit Keying Plan from Mating Direction, Fully Keyed Version 3 4 1 Locking Latch 2 2 Keying Rib 3 Polarisation Rib Rast 5 4 Cavity Number 5 Motor Mount Special Keying 1 2 5 Example of Keyed Version: 05-C This final keying version will be produced on the Application Tooling Equipment Cable Exit 3 1 Double Wire Exit 9 4 2 Wire Exit 90 3 Wire Exit 180 4 Cover 5 Interior Locking Latch (for TAB Version only) 6 Keying 7 Polarisation 2 8 Motor Mount Special Keying 1 9 Colour Marking Area to identify connectors after harnesses are built up 5 6 7 8 2033 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB Connector System AMP MONO-SHAPE MARK II TAB Connector System No. of Positions: 1 to 10 positions Insulation Diameter: 3.0mm max. Product Specification: 108-20213 Contact Material: CuNi2Si Insulation Resistance: >10 M Application Specification: 114-20104 Contact Finish: Tin Plated Wire Size Range: 0.35-1.5mm2 Current Rating: 16 A, up to 4 contacts 16 A Temperature Range: -40C up to +130C Part Numbers No. of Positions Colour Marking as Shipped RAST 5 Version High Glow Wire Packaging Temperature 750 no flame Unit Standard UL94V0 0-284471-1 1-284471-1 2-284471-1 3-284471-1 11000 0-284472-1 1-284472-1 2-284472-1 3-284472-1 5500 0-284473-1 1-284473-1 2-284473-1 3-284473-1 3520 0-284473-2 1-284473-2 2-284473-2 3-284473-2 3520 0-284474-1 1-284474-1 2-284474-1 3-284474-1 2640 0-284474-2 1-28444-2 2-284474-2 3-284474-2 2640 0-284475-1 1-284475-1 2-284475-1 3-284475-1 2200 0-284476-1 1-284476-1 2-284476-1 3-284476-1 1760 0-284476-4 1-284476-4 2-284476-4 3-284476-4 1760 0-284477-1 1-284477-1 2-284477-1 3-284477-1 1540 1 -- 2 -- 3 -- 3 Blue 4 -- 4 Blue 5 -- 6 -- 6 Violet 7 -- 2034 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB Connector System (continued) AMP MONO-SHAPE MARK II TAB Connector System 2 Colour Marking as Shipped Rast 5 Part Numbers No. of Positions RAST 5 Version High Glow Wire Packaging Temperature 750 no flame Unit Standard UL94V0 0-284477-2 1-284477-2 2-284477-2 3-284477-2 1540 0-284477-3 1-284477-3 2-284477-3 3-284477-3 1540 0-284478-1 1-284478-1 2-284478-1 3-284478-1 1320 0-284478-2 1-284478-2 2-284478-2 3-284478-2 1320 0-284480-1 1-284480-1 2-284480-1 3-284480-1 1100 7 Blue 7 Red 8 -- 8 Blue 10 -- 2035 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB-BRIDGE Connector System - Short Circuit AMP MONO-SHAPE MARK II TAB-BRIDGE Connector System - Short Circuit No. of Positions Colour Marking as Shipped RAST 5 Version Part Numbers Bridge Between Cavity Numbers Standard UL94V0 1-2 0-284472-2 1-284472-2 2-284472-2 3-284472-2 5500 1-2 0-284473-3 1-284473-3 2-284473-3 3-284473-3 3520 1-2-3 0-284476-2 1-284476-2 2-284476-2 3-284476-2 1760 1-2 0-284476-3 1-284476-3 2-284476-3 3-284476-3 1760 7-8 0-284480-2 1-284480-2 2-284480-2 3-284480-2 1100 High Glow Wire Packaging Temperature 750 no flame Unit 2 Blue 3 Red 6 Blue 6 Red 10 Blue 2036 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System No. of Positions: 2 to 12 positions Insulation Diameter: 2.8mm max. Product Specification: 108-20214 Contact Material: Brass Insulation Resistance: >10 M Application Specification: 114-20104 Contact Finish: Tin Plated Wire Size Range: 0.35-0.75mm2 Current Rating: 6 A max. Temperature Range: -40C up to +105C 2 Rast 5 AMP MONO-SHAPE MARK II PCB Connector System wire exit 4 3 1 PC Board 3 2 First Circuit Path 3 MONO-SHAPE Connector 4 Wire 1 2 Notes Concerning the PC Board Layout See also Customer Drawing 284482 and Drawing 93-330805-2 for Test PCB Layout 2 1 4 1 First circuit path, mate with Connector way No. 1 2 Slot for connector keying rib Adjacent to first and/or last way Based on connector design, for 3.5mm or 7.5mm length 2 3 3 Hole for locking clip, symmetric Between two ways (diameter 2.5) 4 Slot for connector keying rib symmetric between two ways. Position based on connector design, for 7.5mm length 2037 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions Colour Marking as Shipped RAST 5 Version Glow Wire Packaging 750 no flame Unit Standard UL94V0 0-284482-1 1-284482-1 3-284482-1 5500 0-284482-2 1-284482-2 3-284482-2 5500 0-284482-3 1-284482-3 3-284482-3 5500 0-284482-4 1-284482-4 3-284482-4 5500 0-284482-5 1-284482-5 3-284482-5 5500 0-28482-6 1-284482-6 3-284482-6 5500 0-284483-1 1-284483-1 3-284483-1 3520 0-284483-2 1-284483-2 3-284483-2 3520 0-284483-3 1-284483-3 3-284483-3 3520 0-284483-4 1-284483-4 3-284483-4 3520 0-284484-1 1-284484-1 3-284484-1 2640 2 Green 2 Black 2 Violet 2 Orange 2 Grey 2 Red 3 Green 3 Black 3 Violet 3 Orange 4 Green 2038 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions Colour Marking as Shipped RAST 5 Version Glow Wire Packaging 750 no flame Unit UL94V0 0-284484-2 1-284484-2 3-284484-2 2640 0-284484-3 1-284484-3 3-284484-3 2640 0-284485-1 1-284485-1 3-284485-1 2200 0-284485-2 1-284485-2 3-284485-2 2200 0-284485-3 1-284485-3 3-284485-3 2200 0-28485-4 1-284485-4 3-284485-4 2200 0-284486-1 1-284486-1 3-284486-1 1760 0-284486-2 1-284486-2 3-284486-2 1760 0-284486-3 1-284486-3 3-284486-3 1760 0-284486-4 1-284486-4 3-284486-4 1760 0-284486-5 1-284486-5 3-284486-5 1760 2 Rast 5 Standard 4 Black 4 Violet 5 Green 5 Black 5 Violet 5 Orange 6 Green 6 Black 6 Violet 6 Orange 6 Grey 2039 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions Colour Marking as Shipped RAST 5 Version Glow Wire Packaging 750 no flame Unit Standard UL94V0 0-284487-1 1-284487-1 3-284487-1 1540 0-284487-2 1-284487-2 3-284487-2 1540 0-284487-3 1-284487-3 3-284487-3 1540 0-284488-1 1-284488-1 3-284488-1 1320 0-284488-2 1-284488-2 3-284488-2 1320 0-28488-3 1-284488-3 3-284488-3 1320 0-284488-4 1-284488-4 3-284488-4 1320 0-284489-1 1-284489-1 3-284489-1 1100 0-284489-2 1-284489-2 3-284489-2 1100 0-284489-3 1-284489-3 3-284489-3 1100 0-284489-4 1-284489-4 3-284489-4 1100 7 Green 7 Black 7 Violet 8 Green 8 Black 8 Violet 8 Orange 9 Green 9 Black 9 Violet 9 Orange 2040 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No. of Positions Colour Marking as Shipped RAST 5 Version Glow Wire Packaging 750 no flame Unit UL94V0 0-284490-1 1-284490-1 3-284490-1 1100 0-284490-2 1-284490-2 3-284490-2 1100 0-284491-1 1-284491-1 3-284491-1 880 0-284491-2 1-284491-2 3-284491-2 880 0-284491-3 1-284491-3 3-284491-3 880 0-28492-1 1-284492-1 3-284492-1 880 0-284492-2 1-284492-2 3-284492-2 880 0-284492-3 1-284492-3 3-284492-3 880 2 Rast 5 Standard 10 Green 10 Black 11 Green 11 Black 11 Violet 12 Green 12 Black 12 Violet 2041 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling Entry Level Semi-Automatic IDC Bench Machines SIM 500P Part No. 528376-2 In the Entry Level concept, the application process is shared by two different semi-automatic machines. The SIM 500P prepares the AMP multifitting Mark II bandoliered IDC connectors. The machine removes the connector from the chain and cuts the keying ribs. SIM 500T Part No. 528377-2 SIM 500P Next, the prepared IDC connectors are applied by the SIM 500T. To facilitate this, the individual IDC connectors are loaded into a nest and moved automatically into the termination station. The manually inserted wires are, according to a program, terminated into the appropriate insulation displacement slots. The cover is then separated from the housing, turned and pushed into final position. The nest, including the finished harness module, is removed from the easily accessed track. SIM 500T Technical Features Technical Data Technical Features Technical Data Processing of all versions of the AMP multifitting Mark II connector system with only minor set up changes. Power Supply: 230 V AC, 50 Hz Application of all versions of the AMP multifitting Mark II connector, with only minor set up changes. Termination of the wire with active support of the IDC contact. Termination of two wires (double wire termination) programmable. Connector fixture, incorporating three nests for max. 12 positions each. Accessible and easily interchangeable mechanical program rail. By utilising several connector fixtures and program rails, output and set up times can be optimised. Simple operator interface. Power Supply: 230 V AC, 50 Hz Cutting and reliable removal of the reel clips. Cutting and reliable removal of the coding and polarisation ribs by means of a preset cutting block. Air Pressure: 6 bar Cycle Time: approx. 4 s / connector package (without handling time) Nest capacity per machine cycle - one connector 4- to 8-pos. - two connectors 2- and 3-pos. - four connectors 1-position Integrated monitoring of the connector supply. Simple operator interface. Air Pressure: 6 bar Cycle Time: approx. 1.2 s / line (without handling time) 2042 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling (continued) IDC Workstation - SIM 50 This semi-automatic machine was designed for the sequential processing of AMP multifitting Mark II IDC connector system and its variations such as direct and indirect mating connector with interior or exterior locking. 2 Rast 5 A processing sequence can consist of one or more IDC connectors of the same or different numbers of positions, but a maximum total of 12 positions. The specific key coding of the connectors is performed during the termination process by an integrated cutting device. The wires are manually fed into the machine and then automatically terminated. Integrated control tests ensure a high quality product. Technical Features Processing of all versions of the AMP multifitting Mark II connector system without additional set up time. Termination of the wire with active support of the IDC contact. Termination of two wires in the same slot is programmable. Colour coding on the connector cover possible. Technical Data 50 different production programs can be stored. Power Supply: 230 V AC, 50 Hz Operator PC interface displaying machine status and production data; different languages available. Air Pressure: 6 bar Low maintenance costs and the capability of off-site troubleshooting via modem. Insulation Diameter Range: 1.2 mm up to 3.0 mm Ergonomic and easy to operate through a Touch Screen Display. Wire Size Range: 0.35 mm2 up to 1.5 mm2 Wire Type: Stranded conductors Wire exit angle can be bent 180. Short set up and changeover times. High output. Correct wire insertion length and key codings are continually checked. Good / bad sorter; faulty connections will be destroyed. Processing Modules of the SIM 50 2043 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling (continued) Flexible Harness Maker - FHM The FHM is a fully-automatic machine featuring modular set up. It is built to manufacture harnesses by processing both IDC connectors and crimp terminals. The basic machine includes a 12 wire selector, a station that cuts the wires to length, a stripping station, a doublecrimp unit, two crimping presses and wire end ejector for doubling and daisy chains. A gripper unit takes the wire from the base machine and transfers it to the attached IDC station. Sequential processing allows the manufacturing of cross-overs and bridges as well as double-crimps, depending on the type of IDC connector used. The IDC workstations are easily reconfigured for processing our different IDC connector systems. They include all the necessary processing operations for IDC termination with minimum change-over and set up times. Quality checks integrated in the manufacturing process ensure the highest quality harness for every production run. Technical Features Manufacturing of harnesses with 2.5 mm pitch IDC connectors and/or 5.0 mm pitch IDC connectors and/or with crimp terminals. IDC Workstations are available for the following connector systems: AMP DUOPLUG 2.5 AMP DUOPLUG 2.5 Mark II AMP DUOPLUG Power AMP multifitting Mark II AMP MONO-SHAPE Mark II The IDC Workstations can also be used as separate semi-automatic machines with manual wire transfer. Technical Data Integrated test equipment checks the coding and the insertion depth of the wire, and performs a continuity test. A spark testing unit is also available as an option. Wire printing and single housing insertion possible. Operator PC interface displays machine status and production data; different languages available. Low maintenance costs and the capability of off-site troubleshooting via modem. Power Supply: 400 V AC, 50 Hz Air Pressure: 6 bar Wire Size Range: 0.22 mm2 up to 1.5 mm2 Wire Length: 220 mm up to 2,500 mm Insulation Diameter Range: 1.2 mm up to 3.0 mm Wire Type: Stranded conductors Ergonomic and easy to operate through a Touch Screen Display. The specific key coding of the IDC connector is done on the IDC Workstation. 2044 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling (continued) IDC Harness Maker - IHM Mark III The new IHM Mark III is a very high performance, fullyautomatic machine designed to manufacture parallel jumper harnesses using IDC technology. 2 Rast 5 The simultaneous feeding of up to 21 wires guarantees high productivity and flexibility and a choice of 2.5 mm or 5.0 mm pitch IDC systems. The gripper unit on the left side of the machine is able to spread the wires in both directions to enable the production of harnesses using both 2.5 mm and 5.0 mm pitch connectors at the same time. Available options are a stripper crimper unit with an integrated crimp force analyser and a good/bad sorting unit. The IDC workstations are easily reconfigured for processing our different IDC connector systems. They include all the necessary processing operations for IDC termination with minimum change-over and set up times. Quality checks integrated in the manufacturing process ensure the highest quality harness for every production run. Technical Features Technical Data Manufacturing of harnesses using 2.5 mm and/or 5.0 mm pitch IDC systems. The specific key coding of the IDC connector is done on the IDC Workstation. Very short wire length is possible. Integrated test equipment checks the coding and the insertion depth of the wire, and performs a continuity test. A spark testing unit is also available as an option. Option available to produce harnesses with crimp terminals on one side. IDC Workstations are available for the following connector systems: AMP DUOPLUG 2.5 AMP DUOPLUG 2.5 Mark II AMP DUOPLUG Power AMP multifitting Mark II AMP MONO-SHAPE Mark II Operator PC interface displays machine status and production data; different languages available. Low maintenance costs and the capability of off-site troubleshooting via modem. Power Supply: 400 V AC, 50 Hz Air Pressure: 6 bar Wire Size Range: 0.22 mm2 up to 1.5 mm2 Wire Length: 125 mm up to 2,200 mm Insulation Diameter Range: 1.2 mm up to 3.0 mm Wire Type: Stranded conductors Ergonomic and easy to operate through a Touch Screen Display. AMP MT Edge 2045 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Introduction AMP Standard Timer Connectors in In-Line Mating Technology AMP Standard Timer connectors according to RAST 5.0 mm standard have been developed to connect RAST 5 components (like motors, leach pumps, water level regulators, relays and push-button switches) in the Household Appliances Industry. They meet industry requirements, for example multiple position connectors, secure connection even at inclining mating as well as a sturdy contact design. AMP Standard Power Timer contacts, for use with Standard Timer housings, are suitable for high density and high current capacity up to 16 A. Housing is designed for end-to-end stacking without contact loss. They are available in different keying and locking versions from 2- positions to 12-positions. Standard Timer contacts can be used with stranded wires from 0.5 mm 2 to 2.5 mm 2 and can be double terminated. Of course, the corresponding tooling is available, too. AMP Standard Timer connectors are tested by VDE and fulfil all requirements acc. to VDE 0700 (air gap, creepage distance, glow wire test, ball pressure test, creepage current strength). UL recognised component. Technical Features Centerline: 5.0 mm Available Number of Positions: 2- to 12-positions Housing Material: Polyamide PA 6.6 Contact Material: CuSn, CuFe Contact Finish: Tin Plated, Silver Plated Wire Size Range: from 0.5 to 2.5mm2 Wire Size Diameter: from 2.0 to 3.3mm Temperature Range: -40C to +110C Current Voltage: 220 V~ Current Rating: max. 16 A Standard Timer: 6 A Power Timer: 16 A Mating Force Contact: 15 N Unmating Force: 8N Air and Creepage Distance: 3.0mm Track Resistance: PTI 250 Glow Wire Test: 850C Contacts made for Tabs according:DIN 46244 (6.3 x 0.8mm / 4.8 x 0.8mm) DIN 46343 Part 2 and 3 2046 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Interior and Exterior Locking Interior Locking Mating Direction Connection to the Components according RAST 5 Standard 1 1 Connected Timer Contact 2 Standard Timer Housing with Interior Locking 2 6 Rast 5 3 Keying 4 Polarisation 5 Locking Latch 3 6 Cover (Secondary Locking) 4 7 RAST 5 Tab Array 5 2 7 Exterior Locking Connection to the Components according RAST 5 Standard Mating Direction 1 1 Connected Timer Contact 2 Standard Timer Housing with Exterior Locking 3 Keying 4 Polarisation 5 5 Locking Latch 2 6 RAST 5 Tab Array 3 4 6 2047 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Keying Plan and Housings 6 4 Slanted Keying Rib -7- - 5 -b -4- c c 3 Keying Rib between Cavity -3- 2 Keying Rib d -1- 1 Locking Latch -2- a 5 -6- Keying Plan from Mating Direction 5 Polarisation Rib 6 Cavity Number 1 2 4 3 AMP Standard Timer Housings 2 Position Rast 5 Variations Keying Version Colour Part Numbers 2-928344-2 0-928247-2 2.500 / 3.000 3-964951-2 8-928247-2 2.500 / 2.500 -- 0-964983-2 2.500 6-928344-2 5-928247-2 2.500 / 2.500 5-928344-2 2-964983-2 2.500 / 2.500 3-928344-2 -- 2.500 2-964951-2 3-928247-2 2.500 / 2.500 d - 2 -b -2- a 2.500 / 2.500 a - 1 -b c Grey d -1- 02-C -2- a c Black 6-928247-2 -2- -1- 02-B 928344-2 - 2 -b Natural with Exterior Locking c 02-A Packaging Unit with Interior Locking a - 1 -b RAST 5 Version 02-D a c Blue -1- 02-E - 2 -b - 2 -b a - 1 -b - 1 -b d Violet - 2 -b 02-G a - 1 -b d Green 02-H d Brown 02-I c Orange Bold Part Numbers are Preferred Types 2048 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 2 Position Rast 5 Variations (continued) Keying Version Colour Part Numbers RAST 5 Version 4-928247-2 2.500 - 2 -b 0-928343-2 -- 3.000 -2- -- 3-964983-2 2.500 -2- a -2- -- 0-964951-2 2-928247-2 2.500 / 2.500 -- 7-928247-2 2.500 4-928344-2 -- 2.500 2 c Yellow-Green Rast 5 -1- 02-K with Exterior Locking - 2 -b a with Interior Locking Packaging Unit -1- 02-L -1- 02-M 02-O 02-Q c Turquoise -2- - 1 -b c Purple d -1- 02-P d c Pink a - 1 -b c Ultramarine-Blue d a Natural Bold Part Numbers are Preferred Types AMP Standard Timer Housings 2 Position Special Variations Colour Part Numbers Version -2- -1- Natural with Exterior Locking 7-927740-2 9-928247-2 5.000 - 2 -b Natural -1- with Interior Locking Packaging Unit 0-964768-1 -- 5.000 2049 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 3 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version -3- -- 3.000 - 3 -b -- 0-964983-3 2.500 -- 3-928247-3 2.500 2-928247-3 2.500 4-928247-3 2.500 2-964983-3 2.500 -1- 03-D -2- -3- - 2 -b -3- -2- - 3 -b -1- -- -- c -- -1- Violet -1- 03-G a a c Blue -2- a d c Black 0--928344-3 -3- -1- 03-B - 2 -b c Natural -2- 03-A with Exterior Locking d - 1 -b with Interior Locking Packaging Unit 03-H 03-K c Yellow-Green d d Brown Bold Part Numbers are Preferred Types 2050 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 3 Position Special Variations Colour Part Numbers Version with Exterior Locking -3- -2- -3- -2- -1- Grey 02-928343-3 -- 3.000 -3- - 2 -b -1- Yellow 3.000 3-928343-3 -- 3.000 - 3 -b -2- -1- Grey -- -- 0-928247-3 2.000 -- 2.500 5-928247-3 2.500 2 d -2- -3- -3- -- -1- c 2-928344-3 -2- a d a -1- Black 0--928343-3 Rast 5 Natural -1- a with Interior Locking Packaging Unit Natural Bold Part Numbers are Preferred Types 2051 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 4 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version -4- 5-928247-4 1.250 0-928247-4 2.000 / 1.250 -- 2-928247-4 1.250 -- 3-928247-4 1.250 d 2.000 / 1.250 -2- -3- - 4 -b -3- - 4 -b 3-928344-4 a c Black 4-928247-4 -- a -1- 04-B with Exterior Locking 928344-4 -2- c Natural -3- 04-A -2- - 1 -b with Interior Locking Packaging Unit -1- 04-C -4- -1- 03-G d Violet -2- a d - 4 -b a -3- White -3- -1- 04-F -2- a d Grey AMP Standard Timer Housings 4 Position Special Variations Colour Part Numbers Version -3- -3- -4- - 3 -b -2- -2- -- 2.500 -4- -2- -1- Black 0--928343-4 02-928343-4 -- 2.500 -4- -1- Black with Exterior Locking 3-928344-4 -- 2.500 d a Natural -1- with Interior Locking Packaging Unit Bold Part Numbers are Preferred Types 2052 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 5 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version -5- 2-928247-5 1.000 -5- -4- -- -- 3-928247-5 1.000 2 -4- -3- d Blue -2- 05-D -1- a a d -3- with Exterior Locking Rast 5 Black - 2 -b 05-B -1- with Interior Locking Packaging Unit AMP Standard Timer Housings 5 Position Special Variations Colour Part Numbers Version -3- -4- - 5 -b -3- - 4 -b -5- 02-928343-5 -3- -4- -5- -- - 3 -b -4- -5- -4- -2- -1- -2- Green -1- - 2 -b Yellow -1- -2- Natural with Exterior Locking 1.000 -- 1.000 5-928247-5 1.250 -- 4-928247-5 1.250 -- 6-928247-5 1.250 -5- d c -2- a c d -- d -1- Black d Natural -1- a 0--928343-5 -3- with Interior Locking Packaging Unit Bold Part Numbers are Preferred Types 2053 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 6 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version 964983-6 2.500 928247-6 1.000 2-928247-6 1.000 3-928247-6 1.000 -5- -6- -- -5- - 6 -b -- -5- - 6 -b -- c Grey -- a c 06-C with Exterior Locking d -6- -4- -5- -4- -3- -4- -3- -3- -2- -4- -2- -2- -3- - 1 -b - 1 -b Natural - 2 -b 06-A -1- with Interior Locking Packaging Unit 06-D 06-E d Green -1- a d Blue Bold Part Numbers are Preferred Types 2054 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 6 Position Special Variations Colour Part Numbers Version -1- -2- -3- -4- -5- - 6 -b - 1 -b -2- -3- -4- -5- -6- -1- -2- -3- -4- -5- -6- 928151-6 - 1 -b -2- -4- -5- -6- -- - 1 -b -2- -4- -5- -6- -- -1- -2- -4- -5- -6- -- - 1 -b -2- -3- -4- -5- -6- -- -3- -4- -5- -6- 2-928344-6 - 5 -b -6- 3-928344-6 Beige Yellow Brown Natural Natural -- 1.000 -- 1.000 -- 1.500 7-928247-6 1.000 4-928247-6 1.000 5-928247-6 1.000 6-928247-6 1.000 -- 1.500 -- 1.500 2 d Natural -4- -2- - 3 -b d c c Green -1- a c d c d c -3- c -3- a c -3- c Black - 1 -b 2-928343-6 Natural with Exterior Locking Rast 5 928343-6 -2- with Interior Locking Packaging Unit Bold Part Numbers are Preferred Types 2055 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 7 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version -6- -6- with Exterior Locking 928151-7 -- 1.300 -- 928247-7 700 d -7- c -7- -5- - 5 -b -4- -4- d -3- -3- c d Grey -2- 07-C -2- Natural -1- 07-A/S -1- with Interior Locking Packaging Unit AMP Standard Timer Housings 7 Position Special Variations Colour Part Numbers Version -4- -5- -6- -4- -5- -6- -4- -5- - 6 -b - 5 -b -6- -- 500 2-928343-7 -- 500 928344-7 -- 500 -- 2-928247-7 800 2-928151-7 4-928247-7 Green Natural -- 5-928247-7 1.000 -- 6-928247-7 1.000 -4- -5- -6- -4- -5- -6- - 7 -b -4- -5- -6- -7- 1.300 / 1.000 d c -2- a d d c -7- -3- - 3 -b d -3- d -7- c d -4- -7- -3- -3- -3- -2- -3- -2- - 2 -b -1- Natural -1- a -1- -1- Natural 928343-7 -7- -2- -2- -2- -1- Blue c Natural with Exterior Locking -7- -1- Black a Natural - 1 -b with Interior Locking Packaging Unit Bold Part Numbers are Preferred Types 2056 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 8 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version -8- -7- -6- -- 928247-8 800 2 d c -5- -4- -3- -2- with Exterior Locking Rast 5 Blue d c 08-D -1- with Interior Locking Packaging Unit AMP Standard Timer Housings 8 Position Special Variations Colour Part Numbers Version -5- -6- -7- -4- -5- -6- -7- -4- -5- -6- -7- -4- -5- -6- -7- -8- -4- -3- -3- -3- 1.000 -8- -3- -2- -2- -2- -- 2-928343-8 -- 1.000 - 8 -b -2- -1- Grey 928343-8 3-928343-8 -- 1.000 -8- -1- Black with Exterior Locking -- 2-928247-7 800 d d Natural -1- a Natural -1- with Interior Locking Packaging Unit Bold Part Numbers are Preferred Types 2057 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 9 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version -9- -8- -7- with Exterior Locking -- 2-928247-9 600 d -6- - 5 -b -4- -3- d Blue -2- 09-D -1- with Interior Locking Packaging Unit AMP Standard Timer Housings 9 Position Special Variations Colour Part Numbers Version -6- -7- -8- -9- -6- -7- -8- - 9 -b -6- -7- -8- -9- -6- -7- -9- -5- -5- -5- -4- -- with Exterior Locking -- 1.000 -- 1.000 928247-9 500 3-928247-9 600 -8- a c -2- c d a c -5- -4- -3- -2- -4- -3- -2- -1- Brown -- -4- -2- - 1 -b Yellow 928151-9 -3- - 1 -b Natural 927740-9 - 3 -b Natural -1- with Interior Locking Packaging Unit Bold Part Numbers are Preferred Types 2058 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 10 Position Special Variations Keying Version Colour Part Numbers RAST 5 Version -6- -7- -8- -9- -6- -7- -8- -9- - 10 - -5- -5- -- 1-928247-0 1.400 -- 2-928247-0 500 2 d -4- -4- -3- -2- -2- - 10 - c d -3- a c - 1 -b Grey with Exterior Locking Rast 5 Brown -1- with Interior Locking Packaging Unit AMP Standard Timer Housings 11 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version - 11 - b - 10 - -9- Packaging Unit with Exterior Locking 1-928247-1 -- 1.000 Yellow d -8- -7- -6- -5- -4- -3- c Black -2- 11-B - 1 -b with Interior Locking AMP Standard Timer Housings 11 Position Special Variations Colour Part Numbers Version -3- -4- -5- -6- -7- -8- -9- - 10 - -3- -4- -5- -6- -7- -8- -9- - 10 - - 11 - b -2- -2- 1-927740-1 -- 800 - 11 - b - 1 -b Blue with Exterior Locking -- 2-928247-1 1.000 c d Natural - 1 -b with Interior Locking Packaging Unit AMP Standard Timer Housings 12 Position Special Variations Colour Part Numbers Version - 12 - - 11 - - 10 - -9- - 8 -b -7- -6- -5- -4- -3- -2- Natural -1- with Interior Locking Packaging Unit with Exterior Locking 1-927740-2 -- 700 Bold Part Numbers are Preferred Types 2059 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Standard Timer Connector and Contacts Technical Data Derating Curve I/A 20 Material: Brass, Tin Plated 18 5 16 Mating Part: 6.3 Tab 6 Standard Power Timer Current Rating 14 Wire: FLK 0.5/0.75 and 1.5mm2 Current Carrying Capacity to 6A: 1 = Wire 0.50mm2, 11pos. housing 2 = Wire 0.75mm2, 11pos. housing 3 = Wire 0.50mm2, 2pos. housing 4 = Wire 0.75mm2, 2pos. housing 12 10 8 1 2 34 6 Standard Timer 4 Current Carrying Capacity to 16A: 5 = Wire 1.50mm2, 11pos. housing 6 = Wire 1.50mm2, 2pos. housing 2 0 20 40 60 80 100 120 t/C Ambient Temperature Standard Timer Contacts with One Locking Lance Wire Size Range (mm2) Insulation Diameter Range (mm) Material Finish Part Number Packaging Unit 0.5-1.0 1.4-2.3 CuZn/Brass Tin Plated 928820-1 3.000 1.0-2.5 3.0-4.3 CuZn/Brass Tin Plated 926973-1 2.500 Wire Size Range (mm2) Insulation Diameter Range (mm) Material Finish Part Number Packaging Unit 0.5-1.0 1.4-2.3 CuZn/Brass Tin Plated 964201-1 3.000 1.0-2.5 3.0-4.3 CuZn/Brass Tin Plated 964202-1 2.000 Wire Size Range (mm2) Insulation Diameter Range (mm) Material Finish Part Number Packaging Unit 1.0-2.5 2.2-3.0 CuFe/Copper Iron Tin Plated 964203-1 2.300 1.0-2.5 2.2-3.0 CuFe/Copper Iron Silver Plated 964203-5 2.300 1.5-3.0 max. 2 x 3.0 CuFe/Copper Iron Tin Plated 964204-1 2.000 1.5-3.0 max. 2 x 3.0 CuFe/Copper Iron Silver Plated 964204-5 2.000 Standard Timer Contacts with Two Locking Lances Standard Power Timer Bold Part Numbers are Preferred Types 2060 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Engineering Notes 2 Rast 5 2061 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Engineering Notes 2062 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.com