SPEC NO: DSAB4735 REV NO: V.6 DATE: NOV/28/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000489
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
Package Dimensions & Internal Circuit Diagram
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
P/N: TC08-81EWA HIGH EFFICIENCY RED
20mm (0.8 INCH ) SINGLE COLOR DOT
MATRIX DISPLAY
Features
0.8INCH MATRIX HEIGHT.
DOT SIZE 2mm.
LOW CURRENT OPERATION.
COMPATIBLE WITH ASCII AND EBCDIC CODES.
STACKABLE VERTICALLY AND HORIZONTALLY.
COLUMN CATHODE.
EASY MOUNTING ON P.C.BOARDS OR SOCKETS.
MECHANICALLY RUGGED.
STANDARD:GRAY FACE, WHITE DOT.
RoHS COMPLIANT.
SPEC NO: DSAB4735 REV NO: V.6 DATE: NOV/28/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000489
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
TC08-81EWA HIGH EFFICIENCY RED(GaAsP/GaP) WHITE DIFFUSED 800 3600 Column Cathode
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λDDominant Wavelength High Efficiency Red 625 nm IF=20mA
∆λ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VFForward Voltage High Efficiency Red 2.0 2.5 V IF=20mA
IRReverse Current High Efficiency Red 10 uA VR = 5V
Parameter High Efficiency Red Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
SPEC NO: DSAB4735 REV NO: V.6 DATE: NOV/28/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000489
High Efficiency Red TC08-81EWA
SPEC NO: DSAB4735 REV NO: V.6 DATE: NOV/28/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP:1332000489
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
PACKING & LABEL SPECIFICATIONS TC08-81EWA
