MPSN-62-22-OPT-45-45-25-65 - Newport Corporation

Email: sales@newport.com Web: www.newport.com

FIBER OPTIC COMPONENTS

OPTICAL FIBERS

ACCESSORIES AND TOOLS

EDUCATIONAL KITS TUTORIAL

5-19

2.20 (56.0)

.33 (8.4)

2 Holes,

ø.126 (3.2)

2 Holes,

M2 x .5 THD

1.024

(26.0)

1.26

(32.0)

.131

(3.3)

.236 (6.0)

.63

(16.0)

.787

(20.0)

2.402 (61.0)

1.575 (40.0)

2.64 (67.0) .30 (7.5)

.30 (7.5)

.385

(9.8)

.131

(3.3)

2.047 (52.0)

1.575 (40.0)

2.64 (67.0)

.906

(23.0)

.236 (6.0)

.272 (6.9)

.63

(16.0)

Fiber Optic Switches

Key Features

• Single and multimode fiber

optic switches

•1×2 and 2×2 configurations

• Low insertion loss and low

back-reflection

• High durability — greater

than 10 million cycles

The component-style fiber optic

prism switches offered by Newport

are switches having high durability

— greater than 10 million cycles —

and low insertion loss. The switch

uses a moving prism between fixed

collimator pairs which allows bi-

directional operation independent of

data rate and signal format.

9/125 and 62.5/125 µm, 1 meter,

jacketed fiber pigtails are available

on all models. In addition, optional

ST, FC and SC fiber connector termi-

nation options can be added.

The 1x2 single-mode and multimode

fiber optic switches are two position

devices which enable channel selec-

tion. These non-latching models

require a 5V DC switching voltage.

Applications include fiber and com-

ponent testing and optical signal

routing.

The 2x2 single-mode and multimode

fiber optic switches are fully reversing

optical bypass switches, which are

used to insert or bypass nodes in fiber

ring networks. These non-blocking,

non-latching components require a

5V DC switching voltage. Applications

include bypassing of FDDI and

SONET network stations, automated

and remote fiber test systems.

2 SM & MM Switch 2

2 SM & MM Switch

Dimensions

FROM NEWPORT

MODELS

Phone: 1-800-222-6440 Fax: 1-949-253-1680

TUTORIAL EDUCATIONAL KITS

ACCESSORIES AND TOOLS

OPTICAL FIBERS

FIBER OPTIC COMPONENTS

5-20

1) Excluding connectors-measured at 23±5ºC. 4) Measured at 1550 nm, excluding loopback path.

2) The Loopback path is T

to R

in the bypass state. 5) 1

2 and 2

2 MM switches are wavelength independent.

3) Short-term repeatability for 100 cycles at constant temperature. 6) For 1

2 and 2

2 MM switches, based on FOTP 34 method B,

steady state equilibrium launch conditions, excluding connectors.

Model SPSN-9-12 SPSN-9-22 MPSN-62-12 MPSN-62-22

Switch Type 1

2 SM 2

2 SM 1

2 MM 2

2 MM

Wavelength Range [nm] 1290–1650 1290–1650 —

(5)

—

(5)

Insertion Loss [dB]

(1)

0.8 (typ.), 1.2 (max.) 0.8 (typ.), 1.2 (max.) 0.6 (typ.), 1.0 (max.)

(6)

0.6 (typ.), 1.0 (max.)

(6)

Loopback Path Loss [dB]

(1,2)

— 2.0 (max.) — 2.0 (max.)

Back-Reflection [dB]

(1)

–50 (max.) –50 (max.) — —

Switching Time [msec] 15 (max.) 15 (max.) 15 (max.) 15 (max.)

Cross-Talk [dB] –80 (max.) –80 (max.) –80 (max.) –80 (max.)

Durability [million cycles] > 10 > 10 > 10 > 10

Repeatability [dB]

(3)

(Latching) ±0.005 (max.) ±0.005 (max.) ±0.005 (max.) ±0.005 (max.)

Polarization Dependent Loss [dB]

(4)

0.05 (max.) 0.05 (max.) — —

Fiber Type

9/125 µm 9/125 µm 62.5/125 µm 62.5/125 µm

Switching Voltage [VDC] 4.3 (min.), 6.0 (max.) 4.3 (min.), 6.0 (max.) 4.3 (min.), 6.0 (max.) 4.3 (min.), 6.0 (max.)

Switching Current at 5 VDC [mA] 100 100 100 100

Coil Resistance [ohm] 69.5 ± 10% 69.5 ± 10% 69.5 ± 10% 69.5 ± 10%

Operating Temperature [ºC] –20 to +65 –20 to +65 –20 to +65 –20 to +65

Storage Temperature [ºC] –40 to +85 –40 to +85 –40 to +85 –40 to +85

Humidity 40°C/90% RH/5 days 40°C/90% RH/5 days 40°C/90% RH/5 days 40°C/90% RH/5 days

Price

Specifications

Non-latching Switches

Non-Latching style switches require no

power to maintain one position and a con-

stant +5 VDC drive current to maintain

the other position.

Common Channel 1

Channel 2

Non-Latching

Actuation Pin1 Pin 2

Channel 1 GND GND

Channel 2 GND +5 VDC

Fiber Optic Connector Options

Switch Model-OPT- ■■■■- ■■■■- ■■■■- ■■■■

Please use the following connector codes and the collimator codes, shown in

the table above, when ordering a specific configuration.

Example: SPSN-9-12-OPT-NN-50-70-70 SPSN-9-12 1

2 SM Fiber Switch with FC/SPC

connector on input port and SC/SPC

connectors on output ports.

MPSN-62-22-OPT-25-25-45-45 MPSN-62-22 2

2 MM Fiber Switch with ST/PC

connectors on input ports and FC/PC

connectors on output ports.

Note: Fiber optic connector termination costs are non-refundable due to the

custom nature of the assembly. For connector pricing, see page 5-34.

Single-Mode Connectors

(1)

Style Code

No Connector NN

ST/SPC 30

FC/SPC 50

FC/APC 55

SC/SPC 70

SC/APC 75

Multimode Connectors

(2)

Style Code

No Connector NN

ST/PC 25

FC/PC 45

SC/PC 65

1) Use on SPSN models only.

2) Use on MPSN models only.

First Input Second Output

Connector Code Connector Code

Second Input First Output

Connector Code Connector Code

Note: For 1

2 switches,

please enter NN for

the first input connector

code option.

{