SWFR Place hero product image here shorter square image space available. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION SWFR tubing from TE Connectivity (TE) is a cost effective, highly flame-retardant, 2:1 shrink ratio tubing made irradiated, cross-linked polyolefin. It insulates and mechanically protects components, electrical connections, and terminations. SWFR is offered in two very flexible types. X2 is a thin wall tubing, and X4 is a very thin wall tubing. The thicker wall of the X2 offers better protection, while the space-saving thinner wall of the X4 permits denser packing of protected components and a faster shrink time to better protect against thermal damage of temperature-sensitive components. Both types are halogen free, permitting their use in enclosed spaces where toxic gasses from burning materials containing halogens is undesirable. KEY FEATURES ELECTRICAL, MECHANICAL, & MATERIALS * Highly flame-retardant with UL VW-1 and CSA OFT flammability rating * Provides excellent electrical insulation * Provides mechanical protection from abrasion * Environmentally friendly formula is essentially free of halogens, permitting use in enclosed areas where emission of toxic gasses from burning materials containing halogens is undesirable. * Highly flexible X2 thin wall & X4 very thin wall types * Non-halogenated irradiated polyolefin * RoHS & REACH compliant APPLICATIONS TEMPERATURE RATING * Household appliances * Minimum shrink temperature 70C [158F] * Automotive * Full recovery temperature 90C [194F] * Commercial electronics & communications * Operating temperature -30C to 125C [22F to 257F] * Consumer products * Industrial equipment STANDARDS AND SPECIFICATIONS * Customer drawings: SWFR X2 and SWFR X4 * UL 224 VW-1, CSA OFT * UL file E35586 * CSA file LR31929 APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING ORDERING INFORMATION * Color: Black (-0) * Packaging: (-SP) spool, varying lengths (consult TE for details) & (-FSP) flat on spool (only for sizes 8mm & larger) * Ordering description: Specify product type, size, color & packaging. For example, X2-2/1-0-SP * Standard product is unmarked, but marking on product is available on a special order basis SWFR Tubing Single Wall, Highly Flame-Retardant Heat Shrink Tubing DIMENSIONS Product Type X2 (Thin Wall) X4 (Very Thin Wall) Size Minimum Expanded I.D. (D) Maximum Recovered I.D. (d) Total Recovered Wall Thickness (W) 1.0 1.3 0.5 0.44 1.5 1.9 0.75 0.44 2.0 2.4 1.0 0.44 2.5 2.9 1.25 0.44 3.0 3.4 1.5 0.44 3.5 3.8 1.75 0.46 4.0 4.3 2.0 0.46 5.0 5.3 2.5 0.56 6.0 6.3 3.0 0.56 7.0 7.3 3.5 0.56 8.0 8.3 4.0 0.56 9.0 9.3 4.5 0.56 10.0 10.1 5.0 0.56 12.0 12.4 6.0 0.56 18.0 18.6 9.0 0.77 25.0 26.4 12.5 0.77 30.0 31.6 15.0 0.89 0.8 0.95 0.4 0.25 1.0 1.15 0.5 0.25 1.5 1.65 0.75 0.25 2.0 2.05 1.0 0.26 2.5 2.55 1.25 0.28 3.0 3.05 1.5 0.28 3.5 3.55 1.75 0.28 4.0 4.15 2.0 0.28 6.0 6.1 3.0 0.33 9.0 9.1 4.5 0.33 13.0 13.2 6.5 0.41 18.0 18.6 9.0 0.46 25.0 25.4 12.5 0.46 APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING PAGE 2 SWFR Tubing Single Wall, Highly Flame-Retardant Heat Shrink Tubing PRODUCT DESCRIPTION & ORDERING INFORMATION Product Type X2 (Thin Wall) Material Description Material Number X2-1.0-0-SP X2-1.5-0-SP Product Type Material Description Material Number EJ1477-000 X4-0.8-0-SP EJ1505-000 EJ1478-000 X4-1.0-0-SP EJ1506-000 X2-2.0-0-SP EJ1479-000 X4-1.5-0-SP EJ1507-000 X2-2.5-0-SP EJ1480-000 X4-2.0-0-SP EJ1508-000 X2-3.0-0-SP EJ1481-000 X4-2.5-0-SP EJ1509-000 X2-3.5-0-SP EJ1482-000 X4-3.0-0-SP EJ1510-000 X2-4.0-0-SP EJ1483-000 X4-3.5-0-SP EJ1511-000 X2-5.0-0-SP EJ1484-000 X4-4.0-0-SP EJ1512-000 X4 (Very Thin Wall) X2-6.0-0-SP EJ1485-000 X4-6.0-0-SP EJ1514-000 X2-7.0-0-SP EJ1486-000 X4-9.0-0-FSP EJ1517-000 X2-8.0-0-FSP EJ1488-000 X4-13.0-0-FSP EJ2608-000 X2-9.0-0-FSP EJ1489-000 X4-18.0-0-FSP EJ2612-000 X2-10.0-0-FSP EJ1490-000 X4-25.0-0-FSP EJ2616-000 X2-12.0-0-FSP EJ1492-000 X2-18.0-0-FSP EJ1497-000 X2-25.0-0-FSP EJ1500-000 X2-30.0-0-FSP EJ1502-000 Part Number X2-2.0-0-SP Spool Packaging (FSP indicates flat on spool) Color is Black Size Highly Flame-retardant, Single Wall Product APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING PAGE 3 SWFR Tubing Single Wall, Highly Flame-Retardant Heat Shrink Tubing X2 THIN WALL PROPERTY REQUIREMENTS Property Unit Requirement Test Method mm As shown in DIMENSIONS table ASTM D 2671 ASTM D 2671 percent +1, -5 ASTM D 2671 UL 224 percent +3, -3 UL 224 percent 30 maximum ASTM D 2671 MPa (psi) 10.3 (1500) minimum ASTM D 2671 percent 200 minimum ASTM D 2671 Physical Dimensions Longitudinal change Eccentricity (recovered) Tensile strength Ultimate elongation Secant modulus (as supplied) MPa (psi) Low-temperature flexibility (1 hour at -30C/-22F) Heat shock (4 hours at 250C/482F) 4 172 (2.5 x 10 ) maximum ASTM D 2671 No cracking UL 224 No cracking UL 224 Heat aging UL 224 (7 days at 158C/316F) Followed by tests for: Tensile strength Ultimate elongation MPa (psi) 70% minimum of unaged specimens percent 100 minimum UL 224 No cracking ASTM D 2671 seconds 60 minimum ASTM D 2671 volts 50% minimum of unaged specimens UL 224 kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671 Pass UL 224 seconds 60 minimum ASTM D 2671 kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671 Flexibility Dielectric withstand at 2500V Dielectric breakdown Dielectric strength Restricted shrinkage UL 224 Electrical Dielectric withstand at 2500V Dielectric strength Volume resistivity ohm-cm 14 10 minimum ASTM D 2671 No corrosion ASTM D 2671 No brittleness, glazing, cracking, or severe discoloration of tubing. No pitting or blackening of copper. ASTM D 2671 100 minimum ASTM 2671 Pass UL 224, VW-1 Chemical Corrosive effect (7 days at 158C/316F) Copper stability (7 days at 158C/316F) Followed by tests for: Ultimate elongation percent Flammability APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING PAGE 4 SWFR Tubing Single Wall, Highly Flame-Retardant Heat Shrink Tubing X4 VERY THIN WALL PROPERTY REQUIREMENTS Property Unit Requirement Test Method mm As shown in DIMENSIONS table ASTM D 2671 ASTM D 2671 percent +1, -15 ASTM D 2671 UL 224 percent +3, -3 UL 224 percent 30 maximum ASTM D 2671 MPa (psi) 10.3 (1500) minimum ASTM D 2671 percent 200 minimum ASTM D 2671 Physical Dimensions Longitudinal change Eccentricity (recovered) Tensile strength Ultimate elongation Secant modulus (as supplied) MPa (psi) Low-temperature flexibility (1 hour at -30C/-22F) Heat shock (4 hours at 250C/482F) 4 103 (1.5 x 10 ) maximum ASTM D 2671 No cracking UL 224 No cracking UL 224 Heat aging UL 224 (7 days at 158C/316F) Followed by tests for: Tensile strength Ultimate elongation MPa (psi) 70% minimum of unaged specimens percent 100 minimum UL 224 No cracking ASTM D 2671 seconds 60 minimum ASTM D 2671 volts 50% minimum of unaged specimens UL 224 kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671 Pass UL 224 seconds 60 minimum ASTM D 2671 kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671 Flexibility Dielectric withstand at 2500V Dielectric breakdown Dielectric strength Restricted shrinkage UL 224 Electrical Dielectric withstand at 2500V Dielectric strength Volume resistivity ohm-cm 14 10 minimum ASTM D 2671 No corrosion ASTM D 2671 No brittleness, glazing, cracking, or severe discoloration of tubing. No pitting or blackening of copper. ASTM D 2671 100 minimum ASTM 2671 Pass UL 224, VW-1 Chemical Corrosive effect (7 days at 158C/316F) Copper stability (7 days at 158C/316F) Followed by tests for: Ultimate elongation percent Flammability APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING PAGE 5 SWFR Tubing Single Wall, Highly Flame-Retardant Heat Shrink Tubing FOR MORE INFORMATION Visit www.te.com and enter search term "SWFR," or visit www.te.com/SWFRtubing. TE TECHNICAL SUPPORT CENTER USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 te.com TE Connectivity, TE Connectivity (logo), Zerohal, and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c) 2016TE Connectivity Ltd. family of companiesAll Rights Reserved. 1-1773894-410/16 Original APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING