Place hero product image here
shorter square image space available.
APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING
PRODUCT DESCRIPTION
SWFR tubing from TE Connectivity (TE) is a cost eective, highly flame-retardant,
2:1 shrink ratio tubing made irradiated, cross-linked polyolefin. It insulates and
mechanically protects components, electrical connections, and terminations. SWFR
is oered in two very flexible types. X2 is a thin wall tubing, and X4 is a very thin wall
tubing. The thicker wall of the X2 oers better protection, while the space-saving
thinner wall of the X4 permits denser packing of protected components and a faster
shrink time to better protect against thermal damage of temperature-sensitive
components. Both types are halogen free, permitting their use in enclosed spaces
where toxic gasses from burning materials containing halogens is undesirable.
SWFR
Single Wall, Heat Shrink Tubing
Highly flame-retardant, UL VW-1 rated,
Zerohal tubing
KEY FEATURES
Highly flame-retardant with UL VW-1 and CSA OFT
flammability rating
Environmentally friendly formula is essentially free of
halogens, permitting use in enclosed areas where emission
of toxic gasses from burning materials containing halogens
is undesirable.
APPLICATIONS
Household appliances
Automotive
Commercial electronics & communications
Consumer products
Industrial equipment
STANDARDS AND SPECIFICATIONS
Customer drawings: SWFR X2 and SWFR X4
UL 224 VW-1, CSA OFT
UL file E35586
CSA file LR31929
ELECTRICAL, MECHANICAL, & MATERIALS
Provides excellent electrical insulation
Provides mechanical protection from abrasion
Highly flexible X2 thin wall & X4 very thin wall types
Non-halogenated irradiated polyolefin
RoHS & REACH compliant
TEMPERATURE RATING
Minimum shrink temperature 70°C [158°F]
Full recovery temperature 90°C [194°F]
Operating temperature -30°C to 125°C [22°F to 257°F]
ORDERING INFORMATION
Color: Black (-0)
Packaging: (-SP) spool, varying lengths (consult TE for
details) & (-FSP) flat on spool (only for sizes 8mm & larger)
Ordering description: Specify product type, size, color &
packaging. For example, X2-2/1-0-SP
Standard product is unmarked, but marking on product is
available on a special order basis
PAGE 2APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING
SWFR Tubing
SingleWallHighlyFlame-RetardantHeatShrinkTubing
DIMENSIONS
Product Type Size
Minimum
Expanded I.D. (D)
Maximum
Recovered I.D. (d)
Total Recovered
Wall Thickness (W)
X2 (Thin Wall)
1.0   
1.5   
2.0   
2.5   
3.0   
3.5   
4.0   
5.0   
6.0   
7.0   
8.0   
9.0   
10.0   
12.0   
18.0   
25.0   
30.0   
X4 (Very Thin
Wall)
0.8   
1.0   
1.5   
2.0   
2.5   
3.0   
3.5   
4.0   
6.0   
9.0   
13.0   
18.0   
25.0   
PAGE 3APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING
SWFR Tubing
SingleWallHighlyFlame-RetardantHeatShrinkTubing
Part Number
X2-2.0-0-SP
Spool Packaging (FSP indicates flat on spool)
Color is Black
Size
Highly Flame-retardant, Single Wall Product
PRODUCT DESCRIPTION & ORDERING INFORMATION
Product
Type
Material
Description
Material
Number
X2 (Thin
Wall)
X2-1.0-0-SP EJ1477-000
X2-1.5-0-SP EJ1478-000
X2-2.0-0-SP EJ1479-000
X2-2.5-0-SP EJ1480-000
X2-3.0-0-SP EJ1481-000
X2-3.5-0-SP EJ1482-000
X2-4.0-0-SP EJ1483-000
X2-5.0-0-SP EJ1484-000
X2-6.0-0-SP EJ1485-000
X2-7.0-0-SP EJ1486-000
X2-8.0-0-FSP EJ1488-000
X2-9.0-0-FSP EJ1489-000
X2-10.0-0-FSP EJ1490-000
X2-12.0-0-FSP EJ1492-000
X2-18.0-0-FSP EJ1497-000
X2-25.0-0-FSP EJ1500-000
X2-30.0-0-FSP EJ1502-000
Product
Type
Material
Description
Material
Number
X4 (Very
Thin Wall)
X4-0.8-0-SP EJ1505-000
X4-1.0-0-SP EJ1506-000
X4-1.5-0-SP EJ1507-000
X4-2.0-0-SP EJ1508-000
X4-2.5-0-SP EJ1509-000
X4-3.0-0-SP EJ1510-000
X4-3.5-0-SP EJ1511-000
X4-4.0-0-SP EJ1512-000
X4-6.0-0-SP EJ1514-000
X4-9.0-0-FSP EJ1517-000
X4-13.0-0-FSP EJ2608-000
X4-18.0-0-FSP EJ2612-000
X4-25.0-0-FSP EJ2616-000
PAGE 4
SWFR Tubing
SingleWallHighlyFlame-RetardantHeatShrinkTubing
APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING
X2 THIN WALL PROPERTY REQUIREMENTS
Property Unit Requirement Test Method
Physical
Dimensions mm AsshowninDIMENSIONStable ASTMD
Longitudinal change
ASTM D 2671
UL 224
percent
percent
-
-
ASTMD
UL
Eccentricity (recovered) percent maximum ASTMD
Tensile strength MPa (psi) ()minimum ASTMD
Ultimate elongation percent minimum ASTMD
Secant modulus (as supplied) MPa (psi) (x)maximum ASTMD
Low-temperature flexibility
(1 hour at –30°C/–22°F)
Nocracking UL
Heat shock
(4 hours at 250°C/482°F)
Nocracking UL
Heat aging
(7 days at 158°C/316°F)
UL
Followed by tests for:
Tensile strength MPa (psi) minimumofunaged
specimens UL
Ultimate elongation percent minimum UL
Flexibility Nocracking ASTMD
Dielectric withstand at 2500V seconds minimum ASTMD
Dielectric breakdown volts minimumofunaged
specimens UL
Dielectric strength kV/mm (volts/mil) ()minimum ASTMD
Restricted shrinkage Pass UL
Electrical
Dielectric withstand at 2500V seconds minimum ASTMD
Dielectric strength kV/mm (volts/mil) ()minimum ASTMD
Volume resistivity ohm-cm minimum ASTMD
Chemical
Corrosive eect
(7 days at 158°C/316°F)
Nocorrosion ASTMD
Copper stability
(7 days at 158°C/316°F)
Nobrittlenessglazingcracking
orseverediscolorationoftubing
Nopittingorblackeningofcopper
ASTMD
Followed by tests for:
Ultimate elongation percent minimum ASTM
Flammability Pass ULVW-
PAGE 5
SWFR Tubing
SingleWallHighlyFlame-RetardantHeatShrinkTubing
APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING
X4 VERY THIN WALL PROPERTY REQUIREMENTS
Property Unit Requirement Test Method
Physical
Dimensions mm AsshowninDIMENSIONStable ASTMD
Longitudinal change
ASTM D 2671
UL 224
percent
percent
-
-
ASTMD
UL
Eccentricity (recovered) percent maximum ASTMD
Tensile strength MPa (psi) ()minimum ASTMD
Ultimate elongation percent minimum ASTMD
Secant modulus (as supplied) MPa (psi) (x)maximum ASTMD
Low-temperature flexibility
(1 hour at –30°C/–22°F)
Nocracking UL
Heat shock
(4 hours at 250°C/482°F)
Nocracking UL
Heat aging
(7 days at 158°C/316°F)
UL
Followed by tests for:
Tensile strength MPa (psi) minimumofunaged
specimens UL
Ultimate elongation percent minimum UL
Flexibility Nocracking ASTMD
Dielectric withstand at 2500V seconds minimum ASTMD
Dielectric breakdown volts minimumofunaged
specimens UL
Dielectric strength kV/mm (volts/mil) ()minimum ASTMD
Restricted shrinkage Pass UL
Electrical
Dielectric withstand at 2500V seconds minimum ASTMD
Dielectric strength kV/mm (volts/mil) ()minimum ASTMD
Volume resistivity ohm-cm minimum ASTMD
Chemical
Corrosive eect
(7 days at 158°C/316°F)
Nocorrosion ASTMD
Copper stability
(7 days at 158°C/316°F)
Nobrittlenessglazingcracking
orseverediscolorationoftubing
Nopittingorblackeningofcopper
ASTMD
Followed by tests for:
Ultimate elongation percent minimum ASTM
Flammability Pass ULVW-
APPLIANCES /// SWFR SINGLE WALL HEAT SHRINK TUBING
SWFR Tubing
SingleWallHighlyFlame-RetardantHeatShrinkTubing
te.com
TE Connectivity, TE Connectivity (logo), Zerohal, and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be
trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE
Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth
in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages
arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such
product for the specific application.
© 2016TE Connectivity Ltd. family of companiesAll Rights Reserved.
1-1773894-4  10/16   Original
TE TECHNICAL SUPPORT CENTER
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
FOR MORE INFORMATION
Visit www.te.com and enter search term “SWFR,” or visit www.te.com/SWFRtubing.