105
Power Dividers
500 MHz - 18.0 GHz High Performance
MECHANICAL SPECIFICATIONS -INCHES (mm)
•Full 2.0 - 18.0 GHz bandwidth units
•Low VSWR - High Isolation
•Rugged Stripline Construction
•Meets Mil-E-5400 and Mil-E16400 Environment
Note: 1. Specifications assume that all of the outputs are terminated with a load that has a VSWR not greater than 2.0:1.
2. TNC or N Type output connectors are available by substituting "TNC" or "NNN" for "SMA" in the Model Number.
Housings thickness will increase to 0.75 to accommodate these larger diameter connectors.
ELECTRICAL SPECIFICATIONS
Midwest Microwave's series of high performance isolated Power Dividers
are small, lightweight, ruggedly constructed stripline units that possess
inherently low insertion loss and VSWR with high isolation and excellent
phase and amplitude tracking. Units are available in multi-octave, and
ultra-wideband frequency bandwidths covering the entire range of 0.5 -
18.0 GHz.
Four Way Isolated
ESAC
ELYTS A B C D E
THGIEW
rGzO
1)2.67(00.3 )0.61(36.0 )53.6(052.0 )8.05(00.2 )00.2(080.0 00.4 511
2)1.73(64.1 )5.81(37.0 )53.6(052.0 )8.05(00.2 )00.2(080.0 50.2 85
3)1.231(02.5 )4.52(00.1 )53.6(052.0 )8.05(00.2 )00.2(080.0 03.7 702
FREQUENCY
RANGE (GHZ)
CASE
STYLE MODEL NUMBER
AMPLITUDE
BALANCE
(dB)
PHASE
BALANCE
(Deg)
INSERTION
LOSS
(dB) max
ISOLATION
(dB) min
VSWR
max
INPUT
POWER
max (W)
0.5-2.0 1PWD-5520-04-SMA-79 0.5 10 1.0 18 1.50 30
2.0-8.0 1PWD-5522-04-SMA-79 0.5 10 1.0 18 1.50 30
6.0-18.0 2PWD-5526-04-SMA-79 0.5 10 1.0 18 1.50 30
2.0-18.0 1PWD-5532-04-SMA-79 0.5 10 1.5 18 1.50 30
0.5-18.0 3PWD-5530-04-SMA-79 0.5 10 .0.5+0.20f 16 1.50 30
361545_pp99_106.qxp:1 12/13/07 8:20 AM Page 105
