Data sheet
Creation date December 20, 2013 5:36:10 PM CET
Catalogue status / We reserve the right to make technical changes. 1
RS
RS 8AI1AO MICRO SD S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
General ordering data
Type RS 8AI1AO MICRO SD S
Order No. 9448040000
Version Interface, RS, 1-wire, Screw connection
GTIN (EAN) 4032248253357
Qty. 1 pc(s).
The analogue interfaces are equipped with SubD
connectors. Thus they offer sufficient shielding for
analogue signal transmission. They are also equipped
with very useful isolators and test sockets for measuring
voltage or current.
Data sheet
RS
RS 8AI1AO MICRO SD S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date December 20, 2013 5:36:10 PM CET
Catalogue status / We reserve the right to make technical changes. 2
Dimensions and weights
Length 100 mm Width 87 mm
Height 72 mm Net weight 217 g
Temperatures
Operating temperature -20...+50°C Storage temperature -40...+60 °C
General data
LED status display per channel No Disconnection per channel Yes
Voltage point of measurement Yes Current-measuring testpoint No
Type of test point No LED status of the supply voltage No
Power supply fuse No Common pole polarity Yes
Connection data
Connection to PLC
15-pole D-SUB male
connector
Connection on control side SUB-D plug, in compliance
with IEC 807-2 / DIN
41652
Number of poles (control side) 15-pole plug Connection (field side) LP2N 5.08mm
Connection supply LP2N 5.08mm Wiring system 1-wire
Protective earth connection Shielding in SUB-D plug-in
connector
Ratings data
Operating voltage ≤ 25 V AC / 50 V DC Max. current for common pole 3.15 A
Max. current per channel 0.5 A
Insulation coordination (EN50178)
According to DIN EN 50178 Rated insulation voltage < 50 V AC
Surge voltage category III Pollution severity level 2
Pulse voltage test (1,2/50μs) 0.8 kV Insulation test voltage 0.35 kVAC
Connection field
Type of connection Screw connection Clamping range, min. 0.13 mm²
Clamping range, max. 6 mm² Solid, min. H05(07) V-U 0.5 mm²
Solid, max. H05(07) V-U 6 mm² Flexible, min. H05(07) V-K 0.5 mm²
Flexible, max. H05(07) V-K 4 mm² Flexible with sleeve, max. 2.5 mm²
Flexible with sleeve, min. 0.5 mm² Sleeve with plastic collar, max. 2.5 mm²
Min. wire cross-section, AWG [field] AWG 26 Max. wire cross-section, AWG [field] AWG 12
Tightening torque, min. 0.5 Nm Tightening torque, max. 0.6 Nm
Stripping length 6 mm
Data sheet
RS
RS 8AI1AO MICRO SD S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date December 20, 2013 5:36:10 PM CET
Catalogue status / We reserve the right to make technical changes. 3
Supply connection
Type of connection Screw connection Clamping range, min. 0.13 mm²
Clamping range, max. 6 mm² Solid, min. H05(07) V-U 0.5 mm²
Solid, max. H05(07) V-U 6 mm² Flexible, min. H05(07) V-K 0.5 mm²
Flexible, max. H05(07) V-K 4 mm² Flexible with sleeve, max. 2.5 mm²
Flexible with sleeve, min. 0.5 mm² Ferrule with plastic collar, max. 2.5 mm²
Wire cross-section, min. AWG AWG 26 Wire cross-section, max. AWG AWG 12
Tightening torque, min. 0.5 Nm Tightening torque, max. 0.6 Nm
Stripping length 6 mm
Classifications
ETIM 3.0 EC001423 UNSPSC 30-21-18-01
eClass 5.1 27-24-22-08 eClass 6.2 27-24-22-08
eClass 7.1 27-24-22-08
Approvals
Approvals
ROHS Conform
Data sheet
RS
RS 8AI1AO MICRO SD S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date December 20, 2013 5:36:10 PM CET
Catalogue status / We reserve the right to make technical changes. 4
