DATA SHEET APD Series: Silicon PIN Diodes, Packaged and Bondable Chips Applications Switches Attenuators Features Established Skyworks PIN diode process Low capacitance designs to 0.05 pF Voltage ratings to 200 V Chip size < 15 mils square Tight control of I layer base width Mesa and planar chip designs Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04-0074. Description Skyworks APD series of silicon PIN diodes are designed for use as switch and attenuator devices in high-performance RF and microwave circuits. The PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices use Skyworks well-established silicon technology resulting in PIN diodes with tightly controlled I-region characteristics. The low capacitance and low resistance of the APD0505 through APD1520 diodes are ideal for switch applications that require insertion loss and fast switching speed. For switch or attenuator applications requiring high power and low distortion, the thick Iregion and high reverse breakdown voltage of the APD2220 is ideal. The absolute maximum ratings of the APD diode series are provided in Table 1. Electrical specifications are provided in Table 2. Table 3 identifies the die part numbers with their corresponding top contact diameters and die outline drawings. Table 4 identifies the hermetic part numbers together with their thermal resistance specifications and hermetic outline drawings. Typical performance characteristics are provided in Figures 1 through 8. Skyworks Solutions, Inc. Phone [781] 376-3000 * Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200075P Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 4, 2013 1 DATA SHEET APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS Table 1. APD Series Absolute Maximum Ratings Parameter Symbol Minimum Typical Maximum Units Power dissipation PDIS Maximum TJ Case Temp Thermal Re sis tan ce junctiontocase W Reverse voltage VR See Voltage Rating column in Table 2 V Forward current IF 200 mA Operating temperature TOP -65 +175 C Storage temperature TSTG -65 +200 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 2. APD Series Electrical Specifications (Note 1) (TOP = +25 C, Unless Otherwise Noted) Junction Capacitance (CJ) VR = 50 V, 1 MHz (pF) Junction Capacitance (CJ) VR = 0 V, 1 MHz (pF) Series Resistance (RS), I = 10 mA, 500 MHz () Minority Carrier Lifetime (TL) I = 10 mA (ns) Maximum Typical Maximum Typical APD0505-000 0.05 0.10 2.5 70 APD0510-000 0.10 0.20 1.5 90 APD0520-000 0.20 0.25 1.0 120 50 5 55 APD0805-000 0.05 0.10 2.0 100 100 8 87 APD0810-000 0.10 0.15 1.5 160 100 8 60 APD1505-000 0.06 @ 10 V 0.12 2.5 350 200 15 60 APD1510-000 0.10 0.20 2.0 300 200 15 56 APD1520-000 0.20 0.25 1.2 900 200 15 44 0.20 0.35 4.0 700 100 50 18 Parameter I-Region Thickness (m) Thermal Resistance (JC) (C/W) Nominal Maximum 50 5 118 50 5 76 Voltage Rating (Note 2) (V) Switching Applications Attenuator Applications APD2220-000 Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: Reverse current is specified at 10 A maximum at the voltage rating noted. Do not exceed this voltage. Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 2 October 4, 2013 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200075P DATA SHEET APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS Table 3. APD Series Parts Part Number Top Contact Diameter (0.5 mils) Die Drawing APD0505-000 1.50 150-806 APD0510-000 2.50 150-801 APD0520-000 3.50 150-801 APD0805-000 2.00 150-801 APD0810-000 3.00 150-801 APD1505-000 2.75 150-806 APD1510-000 3.00 150-813 APD1520-000 4.00 150-802 8.50 149-815 Switching Applications Attenuator Applications APD2220-000 Table 4. Hermetic Packages Hermetic Pill Drawing Typical Thermal Resistance (jc) (C/W) Hermetic Pill Drawing Typical Thermal Resistance (jc) (C/W) 232 APD0505-210 133 APD0505-219 201 189 APD0510-210 90 APD0510-219 158 APD0520-203 167 APD0520-210 59 APD0520-219 136 182 APD0805-203 201 APD0805-210 107 APD0805-219 170 155 APD0810-203 174 APD0810-210 75 APD0810-219 143 APD1505-240 150 APD1505-203 172 APD1505-210 74 APD1505-219 142 APD1510-240 149 APD1510-203 168 APD1510-210 70 APD1510-219 137 APD1520-240 136 APD1520-203 155 APD1520-210 57 APD1520-219 124 APD2220-240 115 APD2220-203 132 APD2220-210 32 APD2220-219 104 Hermetic Pill Drawing Typical Thermal Resistance (jc) (C/W) 214 APD0505-203 170 APD0510-203 APD0520-240 148 APD0805-240 APD0810-240 Hermetic Stripline Drawing Typical Thermal Resistance (jc) (C/W) APD0505-240 APD0510-240 Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200075P Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 4, 2013 3 DATA SHEET APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS Typical Performance Characteristics at 25 C 1000 1000 APD2220-000 100 Resistance () Resistance () 100 APD0805-000 10 1 APD0505-000 10 APD0810-000 APD0510-000 1 APD1510-000 0.1 0.01 0.1 1 10 0.1 0.01 100 0.1 Forward Current (mA) 10.0 1.0 0.1 0.01 0.10 1 10 160 140 120 100 80 60 40 20 0 100 APD0505 APD0510 APD0520 APD0805 APD0810 APD1505 APD1510 APD1520 APD2220 180 Y0246 Maximum CW Input Power (W) 200 100.0 25 50 Forward Current (mA) 20 0 25 50 75 100 125 150 175 150 175 Case Temperature (C) Figure 5. Maximum CW Input Power vs Case Temperature (-210 Package) APD0505 APD0510 APD0520 APD0805 APD0810 APD1505 APD1510 APD1520 APD2220 25 20 15 10 5 Y0248 Y0247 40 Maximum CW Input Power (W) 60 125 30 APD0505 APD0510 APD0520 APD0805 APD0810 APD1505 APD1510 APD1520 APD2220 80 100 Figure 4. Maximum CW Input Power vs Case Temperature (-000 Package) 120 100 75 Case Temperature (C) Figure 3. Resistance vs Forward Current @ 500 MHz (APD1505-000 Package) 0 25 50 75 100 125 150 175 Case Temperature (C) Figure 6. Maximum CW Input Power vs Case Temperature (-203 Package) Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 4 100 Figure 2. Resistance vs Forward Current @ 1 GHz 1000.0 Resistance () 10 Forward Current (mA) Figure 1. Resistance vs Forward Current @ 1 GHz Maximum CW Input Power (W) 1 October 4, 2013 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200075P DATA SHEET APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS 35 25 20 15 10 5 APD0505 APD0510 APD0520 APD0805 APD0810 APD1505 APD1510 APD1520 APD2220 30 25 20 15 10 5 Y0250 30 Maximum CW Input Power (W) APD0505 APD0510 APD0520 APD0805 APD0810 APD1505 APD1510 APD1520 APD2220 Y0249 Maximum CW Input Power (W) 35 0 0 25 50 75 100 125 150 25 175 50 75 100 125 150 175 Case Temperature (C) Case Temperature (C) Figure 8. Maximum CW Input Power vs Case Temperature (-240 Package) Figure 7. Maximum CW Input Power vs Case Temperature (-219 Package) Package Outline Drawings Package outline die drawings for the APD diode series are shown in Figures 9 and 10. Hermetic package outlines are shown in Figures 11 through 14. Die Packages Schematic 1 Anode Top Contact, Gold 0.002 (0.051 mm) Diameter Minimum [0.008 (0.203 mm) Diameter for the APD2220-000] 2 0.014 0.001 (0.356 0.025 mm) 0.014 0.001 (0.356 0.025 mm) 0.004 (0.10 mm) 0.006 (0.15 mm) Nominal 1 Cathode Metallized Back Contact, Gold 2 S1565a Figure 9. 149-815 Package Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200075P Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 4, 2013 5 DATA SHEET APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS Schematic Anode Metallized Gold Dot 0.010 (0.254 mm) Min. 0.014 (0.356 mm) Max. Sq. 1 2 150-801: 0.002 (0.051 mm) Min. [0.0015 (0.038 mm) Min. for the APD0805-000] 150-806: 0.0011 (0.028 mm) Nom. 1 0.004 (0.10 mm) Min. 0.006 (0.15 mm) Max. Silicon 2 Cathode Metallized Back Contact: Gold S1567a Figure 10. 150 Series Package Hermetic Packages Schematic N-Type 1 1 0.050 (1.27 mm) 0.040 (1.02 mm) 2 2 0.055 (1.40 mm) 0.051 (1.30 mm) Dia. S1569 Figure 11. -203 Package Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 6 October 4, 2013 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200075P DATA SHEET APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS Schematic 1 0.064 (1.63 mm) 0.060 (1.52 mm) 2 Places 0.124 (3.15 mm) 0.119 (3.02 mm) Dia. 2 0.025 (0.63 mm) Max. 1 0.097 (2.46 mm) 0.083 (2.11 mm) 0.225 (5.72 mm) 0.205 (5.20 mm) 2 0.064 (1.63 mm) 0.060 (1.52 mm) 0.083 (2.11 mm) 0.077 (1.95 mm) Dimensions are in inches (millimeters shown in parentheses) S1570 Figure 12. -210 Package Schematic 1 2 0.075 (1.91 mm) 0.065 (1.65 mm) Sq. Cathode 0.020 (0.51 mm) Typ. 0.033 (0.84 mm) Min. 0.045 (1.14 mm) 0.030 (0.76 mm) 1 2 0.010 (0.25 mm) Ref. Dimensions are in inches (millimeters shown in parentheses) S1564 Figure 13. -219 Package Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200075P Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 4, 2013 7 DATA SHEET APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS Schematic 1 -011 (240) 50 45 0.175 (4.44 mm) 0.125 (3.18 mm) 2 Plcs. 1 0.098 (2.49 mm) 0.092 (2.34 mm) Cover Dia. 2 2 0.022 (0.56 mm) 0.018 (0.46 mm) 2 Plcs. Colored Dot Denotes Cathode 0.104 (2.64 mm) 0.092 (2.34 mm) Sq. 0.005 (0.127 mm) 0.003 (0.076 mm) Dimensions are in inches (millimeters shown in parentheses) 0.042 (1.06 mm) 0.028 (0.71 mm) S1568 Figure 14. -240 Package Copyright (c) 2002-2010, 2012-2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 8 October 4, 2013 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200075P