DB LECTRO Inc. SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts 1500 Watts Peak Pulse Power SMCJ PART NUMBER UNIPOLAR SMCJ5.0A SMCJ6.0A SMCJ6.5A SMCJ7.0A SMCJ7.5A SMCJ8.0A SMCJ8.5A SMCJ9.0A SMCJ10A SMCJ11A SMCJ12A SMCJ13A SMCJ14A SMCJ15A SMCJ16A SMCJ17A SMCJ18A SMCJ20A SMCJ22A SMCJ24A SMCJ26A SMCJ28A SMCJ30A SMCJ33A SMCJ36A SMCJ40A SMCJ43A SMCJ45A SMCJ48A SMCJ51A SMCJ54A SMCJ58A SMCJ60A SMCJ64A SMCJ70A SMCJ75A SMCJ78A SMCJ85A SMCJ90A SMCJ100A SMCJ110A SMCJ120A SMCJ130A SMCJ150A SMCJ160A SMCJ170A DEVICE MARKING CODE BI-POLAR UNI BI SMCJ5.0CA SMCJ6.0CA SMCJ6.5CA SMCJ7.0CA SMCJ7.5CA SMCJ8.0CA SMCJ8.5CA SMCJ9.0CA SMCJ10CA SMCJ11CA SMCJ12CA SMCJ13CA SMCJ14CA SMCJ15CA SMCJ16CA SMCJ17CA SMCJ18CA SMCJ20CA SMCJ22CA SMCJ24CA SMCJ26CA SMCJ28CA SMCJ30CA SMCJ33CA SMCJ36CA SMCJ40CA SMCJ43CA SMCJ45CA SMCJ48CA SMCJ51CA SMCJ54CA SMCJ58CA SMCJ60CA SMCJ64CA SMCJ70CA SMCJ75CA SMCJ78CA SMCJ85CA SMCJ90CA SMCJ100CA SMCJ110CA SMCJ120CA SMCJ130CA SMCJ150CA SMCJ160CA SMCJ170CA GDE GDG GDK GDM GDP GDR GDT GDV GDX GDZ GEE GEG GEK GEM GEP GER GET GEV GEX GEZ GFE GFG GFK GFM GFP GFR GFT GFV GFX GFZ GGE GGG GGK GGM GGP GGR GGT GGV GGX GGZ GHE GHG GHK GHM GHP GHR BDE BDG BDK BDM BDP BDR BDT BDV BDX BDZ BEE BEG BEK BEM BEP BER BET BEV BEX BEZ BFE BFG BFK BFM BFP BFR BFT BFV BFX BFZ BGE BGG BGK BGM BGP BGR BGT BGV BGX BGZ BHE BHG BHK BHG BHP BGR REVERSE BREAKDOWN BREAKDOWN TEST PEAK REVERSE MAXIMUN VOLTAGE STANDVOLTAGE CURRENT CLAMPING PULSE LEAKAGE OFF VBR(V) VBR(V) IT (mA) VOLTAGE CURRENT @VRWM VOLTAGE Ipp (A) @Ipp Vc(V) MIN.@IT MAX.@IT IR(A) VRWM(V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 163.0 145.7 134.0 125.0 116.3 110.3 104.2 97.4 88.3 82.5 75.4 69.8 64.7 61.5 57.7 54.4 51.4 46.3 42.3 38.6 35.7 33.1 31.0 28.2 25.9 23.3 21.7 20.6 19.4 18.2 17.3 16.1 15.5 14.6 13.3 12.4 11.9 11.0 10.3 9.3 8.5 7.8 7.2 6.2 5.8 5.5 800 800 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is + 10% DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 DB LECTRO Inc. SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 1500 Watt Peak Pulse Power FEATURES For surface mounted applications in order to optimize Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate(duty cycle):0.05% Fast response time: typically less than 1.0ps from Dimensions in inches and (millimeters) Typical IR less than 1mA above 10V High temperature soldering: 250C/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability MECHANICAL DATA Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) except Bidirectional Standard Packaging: 16mm tape(EIA STD RS-481) Weight: 0.007ounce, 0.21gram DEVICES FOR BIPOLAR APPLICATION For Bidirectional use C or CA Suffix for types SMCJ5.0 thru types SMCJ170 (e.g. SMCJ5.0C , SMCJ170CA) Electrical characteristics apply in both directions MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Minimum PPPM Peak Pulse Power Dissipation on 10/1000s waveform (Note 1,2,FIG.1) Watts 1500 SEE IPPM Peak Pulse Current of on 10/1000s waveform (Note 1,FIG.3) Amps TABLE 1 Peak Forward Surge Current,8.3ms Single Half Sine-Wave IFSM 200 Amps Superimposed on Rated Load,(JEDEC Method) (Note 2,3) -55 to + TJ , TSTG Operating junction and Storage Temperature Range 150 per Fig. 2 . Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 2 2.Mounted on 8.0mm Copper Pads to each terminal RATING 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 DB LECTRO Inc. SMCJ SERIES RATINGS AND CHARACTERISTIC CURVES Ratings and Characteristic Curves(TA=25 unless otherwise noted) Fig. 1 - Peak Pulse Power Rating Fig.2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% PPPM-Peak Pulse Power (kW) 100 10 1 0.31x0.31"(8.0x8.0mm) Copper Pad Areas 0.1 100 87.5 75 62.5 50 37.5 25 12.5 0 0.1s 1.0s 10s 100s 1.0ms 10ms 0 td - Pulse Width (sec.) 25 50 75 100 125 150 175 200 TA - Ambient Temperature (C) 100000 Fig.4 - Typical Junction Capacitance Uni-Directional Fig.3 - Pulse Waveform 20000 Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value- IPPM 2 10/1000sec.Waveform as defined by R.E.A. 50 td 1000 VR,Measured at Stand-Off Voltage, VWM 100 1000 1.0 2.0 3.0 3.0 4.0 1.0 4.0 10 100 400 Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only Fig. 5 - Typ.Transient Thermal Impedance 100 200 Peak Forward Surge Current,Amperes Transient Thermal Impedance ( /W) 400 VWM - Reverse Stand-Off Voltage (V) t - Time(ms) 10 1.01 0.1 0.001 TJ = 25C f = 1.0MHZ Vsig = 50mVp-p Uni-Directional Bi-Directional 10 0 0 Measured at Zero Bias 10000 TJ = 25C tr = 10sec. CJ - Junction Capacitance(pF) IPPM - Peak Pulse Current,% IRSM 150 100 8.3ms Single Half Sine-Wave (JEDEC Method) TJ = TJ max, 10 0.01 0.1 1 10 tp-Pulse Duration (sec) 100 1000 1 10 100 Number of Cycles at 60 Hz DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714