Revised April 2000 DM74S86 Quad 2-Input Exclusive-OR Gate General Description This device contains four independent gates each of which performs the logic Exclusive-OR function. Ordering Code: Order Number DM74S86N Package Number N14A Package Description 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Connection Diagram Function Table Y = A B = A B + AB Inputs Output A B L L Y L L H H H L H H H L H = HIGH Logic Level L = LOW Logic Level (c) 2000 Fairchild Semiconductor Corporation DS006458 www.fairchildsemi.com DM74S86 Quad 2-Input Exclusive-OR Gate August 1986 DM74S86 Absolute Maximum Ratings(Note 1) Supply Voltage Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. 7V Input Voltage 5.5V 0C to +70C Operating Free Air Temperature Range -65C to +150C Storage Temperature Range Recommended Operating Conditions Symbol Parameter Min Nom Max 4.75 5 5.25 Units VCC Supply Voltage VIH HIGH Level Input Voltage VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current -1 mA IOL LOW Level Output Current 20 mA TA Free Air Operating Temperature 70 C V 2 V 0 Electrical Characteristics over recommended operating free air temperature (unless otherwise noted) Symbol Parameter Conditions VI Input Clamp Voltage VCC = Min, II = -18 mA VOH HIGH Level VCC = Min, IOH = Max VOL Output Voltage VIL = Max, VIH = Min LOW Level VCC = Min, IOL = Max Output Voltage VIH = Min, VIL = Max Min Typ (Note 2) Max -1.2 2.7 3.4 Units V V 0.5 V mA II Input Current @ Max Input Voltage VCC = Max, VI = 5.5V 1 IIH HIGH Level Input Current VCC = Max, VI = 2.7V 50 A IIL LOW Level Input Current VCC = Max, VI = 0.5V -2 mA IOS Short Circuit Output Current VCC = Max (Note 3) -100 mA ICCH Supply Current with Outputs HIGH VCC = Max (Note 4) 35 50 mA ICCL Supply Current with Outputs LOW VCC = Max (Note 5) 50 75 mA -40 Note 2: All typicals are at VCC = 5V, TA = 25C. Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 4: ICCH is measured with all outputs OPEN, one input of each gate at 4.5V, and the other inputs grounded. Note 5: ICCL is measured with all outputs OPEN and all inputs grounded. Switching Characteristics at VCC = 5V and TA = 25C RL = 280 Symbol Parameter CL = 15 pF From (Input) to (Output) tPLH Propagation Delay Time LOW-to-HIGH Level Output tPHL Min Propagation Delay Time A or B to Y HIGH-to-LOW Level Output www.fairchildsemi.com 2 Max CL = 50 pF Min Units Max 10.5 14 ns 10 13 ns DM74S86 Quad 2-Input Exclusive-OR Gate Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 3 www.fairchildsemi.com